3 files changed, 541 insertions, 0 deletions
diff --git a/src/class/printer/printer.h b/src/class/printer/printer.h
new file mode 100644
index 000000000..09d1a8956
--- /dev/null
+++ b/src/class/printer/printer.h
@@ -0,0 +1,62 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2026 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef TUSB_PRINTER_H_
+#define TUSB_PRINTER_H_
+
+#include "common/tusb_common.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/// Printer Class Specific Control Request
+typedef enum {
+  TUSB_PRINTER_REQUEST_GET_DEVICE_ID   = 0x00, ///< Get device ID
+  TUSB_PRINTER_REQUEST_GET_PORT_STATUS = 0x01, ///< Get port status
+  TUSB_PRINTER_REQUEST_SOFT_RESET      = 0x02, ///< Soft reset
+} tusb_printer_request_type_t;
+
+/// Printer Port Status (returned by GET_PORT_STATUS request)
+/// USB Printer Class spec 1.1, Section 4.2
+typedef union TU_ATTR_PACKED {
+  uint8_t status;
+  struct TU_ATTR_PACKED {
+    uint8_t reserved0   : 3; ///< Reserved (bits 0-2)
+    uint8_t not_error   : 1; ///< 1 = no error, 0 = error
+    uint8_t selected    : 1; ///< 1 = selected (online), 0 = not selected
+    uint8_t paper_empty : 1; ///< 1 = paper empty, 0 = paper not empty
+    uint8_t reserved6   : 2; ///< Reserved (bits 6-7)
+  } status_bm;
+} tusb_printer_port_status_t;
+
+TU_VERIFY_STATIC(sizeof(tusb_printer_port_status_t) == 1, "size is not correct");
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/src/class/printer/printer_device.c b/src/class/printer/printer_device.c
new file mode 100644
index 000000000..158455fc9
--- /dev/null
+++ b/src/class/printer/printer_device.c
@@ -0,0 +1,328 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2026 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb_option.h"
+
+#if (CFG_TUD_ENABLED && CFG_TUD_PRINTER)
+
+#include "device/usbd.h"
+#include "device/usbd_pvt.h"
+
+#include "printer_device.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF
+//--------------------------------------------------------------------+
+
+typedef struct {
+  uint8_t itf_num;
+
+  /*------------- From this point, data is not cleared by bus reset -------------*/
+  tu_edpt_stream_t rx_stream;
+  tu_edpt_stream_t tx_stream;
+
+  uint8_t rx_ff_buf[CFG_TUD_PRINTER_RX_BUFSIZE];
+  uint8_t tx_ff_buf[CFG_TUD_PRINTER_TX_BUFSIZE];
+} printer_interface_t;
+
+#define ITF_MEM_RESET_SIZE offsetof(printer_interface_t, rx_stream)
+
+#if CFG_TUD_EDPT_DEDICATED_HWFIFO == 0
+typedef struct {
+  TUD_EPBUF_DEF(epout, CFG_TUD_PRINTER_RX_EPSIZE);
+  TUD_EPBUF_DEF(epin, CFG_TUD_PRINTER_TX_EPSIZE);
+} printer_epbuf_t;
+
+CFG_TUD_MEM_SECTION static printer_epbuf_t _printer_epbuf[CFG_TUD_PRINTER];
+#endif
+
+static printer_interface_t _printer_itf[CFG_TUD_PRINTER];
+
+//--------------------------------------------------------------------+
+// INTERNAL HELPERS
+//--------------------------------------------------------------------+
+
+TU_ATTR_ALWAYS_INLINE static inline uint8_t _find_itf(uint8_t ep_addr) {
+  for (uint8_t i = 0; i < CFG_TUD_PRINTER; i++) {
+    const printer_interface_t *p = &_printer_itf[i];
+    if (ep_addr == p->rx_stream.ep_addr || ep_addr == p->tx_stream.ep_addr) {
+      return i;
+    }
+  }
+  return TUSB_INDEX_INVALID_8;
+}
+
+//--------------------------------------------------------------------+
+// Weak stubs: invoked if no strong implementation is available
+//--------------------------------------------------------------------+
+TU_ATTR_WEAK void tud_printer_rx_cb(uint8_t itf) {
+  (void)itf;
+}
+
+TU_ATTR_WEAK void tud_printer_tx_complete_cb(uint8_t itf) {
+  (void)itf;
+}
+
+TU_ATTR_WEAK void tud_printer_request_complete_cb(uint8_t itf, tusb_control_request_t const *request) {
+  (void)itf;
+  (void)request;
+}
+
+TU_ATTR_WEAK uint8_t const *tud_printer_get_device_id_cb(uint8_t itf) {
+  (void)itf;
+  return NULL;
+}
+
+TU_ATTR_WEAK uint8_t tud_printer_get_port_status_cb(uint8_t itf) {
+  (void)itf;
+  return 0x18; // not error, selected, paper not empty
+}
+
+TU_ATTR_WEAK void tud_printer_soft_reset_cb(uint8_t itf) {
+  (void)itf;
+}
+
+//--------------------------------------------------------------------+
+// READ API
+//--------------------------------------------------------------------+
+uint32_t tud_printer_n_read_available(uint8_t itf) {
+  TU_VERIFY(itf < CFG_TUD_PRINTER, 0);
+  return tu_edpt_stream_read_available(&_printer_itf[itf].rx_stream);
+}
+
+uint32_t tud_printer_n_read(uint8_t itf, void *buffer, uint32_t bufsize) {
+  TU_VERIFY(itf < CFG_TUD_PRINTER, 0);
+  return tu_edpt_stream_read(&_printer_itf[itf].rx_stream, buffer, bufsize);
+}
+
+bool tud_printer_n_peek(uint8_t itf, uint8_t *chr) {
+  TU_VERIFY(itf < CFG_TUD_PRINTER);
+  return tu_edpt_stream_peek(&_printer_itf[itf].rx_stream, chr);
+}
+
+void tud_printer_n_read_flush(uint8_t itf) {
+  TU_VERIFY(itf < CFG_TUD_PRINTER, );
+  printer_interface_t *p = &_printer_itf[itf];
+  tu_edpt_stream_clear(&p->rx_stream);
+  tu_edpt_stream_read_xfer(&p->rx_stream);
+}
+
+//--------------------------------------------------------------------+
+// WRITE API
+//--------------------------------------------------------------------+
+uint32_t tud_printer_n_write(uint8_t itf, const void *buffer, uint32_t bufsize) {
+  TU_VERIFY(itf < CFG_TUD_PRINTER, 0);
+  return tu_edpt_stream_write(&_printer_itf[itf].tx_stream, buffer, bufsize);
+}
+
+uint32_t tud_printer_n_write_flush(uint8_t itf) {
+  TU_VERIFY(itf < CFG_TUD_PRINTER, 0);
+  return tu_edpt_stream_write_xfer(&_printer_itf[itf].tx_stream);
+}
+
+uint32_t tud_printer_n_write_available(uint8_t itf) {
+  TU_VERIFY(itf < CFG_TUD_PRINTER, 0);
+  return tu_edpt_stream_write_available(&_printer_itf[itf].tx_stream);
+}
+
+bool tud_printer_n_write_clear(uint8_t itf) {
+  TU_VERIFY(itf < CFG_TUD_PRINTER);
+  tu_edpt_stream_clear(&_printer_itf[itf].tx_stream);
+  return true;
+}
+
+//--------------------------------------------------------------------+
+// USBD-CLASS API
+//--------------------------------------------------------------------+
+void printerd_init(void) {
+  tu_memclr(_printer_itf, sizeof(_printer_itf));
+
+  for (uint8_t i = 0; i < CFG_TUD_PRINTER; i++) {
+    printer_interface_t *p = &_printer_itf[i];
+
+  #if CFG_TUD_EDPT_DEDICATED_HWFIFO
+    uint8_t *epout_buf = NULL;
+    uint8_t *epin_buf  = NULL;
+  #else
+    uint8_t *epout_buf = _printer_epbuf[i].epout;
+    uint8_t *epin_buf  = _printer_epbuf[i].epin;
+  #endif
+
+    tu_edpt_stream_init(&p->rx_stream, false, false, false,
+                        p->rx_ff_buf, CFG_TUD_PRINTER_RX_BUFSIZE, epout_buf);
+
+    tu_edpt_stream_init(&p->tx_stream, false, true, true,
+                        p->tx_ff_buf, CFG_TUD_PRINTER_TX_BUFSIZE, epin_buf);
+  }
+}
+
+bool printerd_deinit(void) {
+  for (uint8_t i = 0; i < CFG_TUD_PRINTER; i++) {
+    printer_interface_t *p = &_printer_itf[i];
+    tu_edpt_stream_deinit(&p->rx_stream);
+    tu_edpt_stream_deinit(&p->tx_stream);
+  }
+  return true;
+}
+
+void printerd_reset(uint8_t rhport) {
+  (void)rhport;
+
+  for (uint8_t i = 0; i < CFG_TUD_PRINTER; i++) {
+    printer_interface_t *p = &_printer_itf[i];
+    tu_memclr(p, ITF_MEM_RESET_SIZE);
+    tu_edpt_stream_close(&p->rx_stream);
+    tu_edpt_stream_close(&p->tx_stream);
+  }
+}
+
+uint16_t printerd_open(uint8_t rhport, const tusb_desc_interface_t *itf_desc, uint16_t max_len) {
+  TU_VERIFY(TUSB_CLASS_PRINTER == itf_desc->bInterfaceClass, 0);
+
+  // Find available interface slot
+  uint8_t const printer_id = _find_itf(0);
+  TU_ASSERT(printer_id < CFG_TUD_PRINTER, 0);
+  printer_interface_t *p = &_printer_itf[printer_id];
+
+  p->itf_num = itf_desc->bInterfaceNumber;
+
+  //------------- Endpoints -------------//
+  const uint8_t *p_desc   = (const uint8_t *)itf_desc;
+  const uint8_t *desc_end = p_desc + max_len;
+  uint16_t drv_len = sizeof(tusb_desc_interface_t);
+
+  p_desc = tu_desc_next(itf_desc);
+  for (uint8_t e = 0; e < itf_desc->bNumEndpoints; e++) {
+    TU_VERIFY(tu_desc_in_bounds(p_desc, desc_end), 0);
+    const tusb_desc_endpoint_t *desc_ep = (const tusb_desc_endpoint_t *)p_desc;
+    TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType && TUSB_XFER_BULK == desc_ep->bmAttributes.xfer, 0);
+
+    TU_ASSERT(usbd_edpt_open(rhport, desc_ep), 0);
+
+    if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) {
+      tu_edpt_stream_t *stream_tx = &p->tx_stream;
+      tu_edpt_stream_open(stream_tx, rhport, desc_ep, CFG_TUD_PRINTER_TX_EPSIZE);
+      tu_edpt_stream_clear(stream_tx);
+    } else {
+      tu_edpt_stream_t *stream_rx = &p->rx_stream;
+      tu_edpt_stream_open(stream_rx, rhport, desc_ep, tu_edpt_packet_size(desc_ep));
+      tu_edpt_stream_clear(stream_rx);
+      TU_ASSERT(tu_edpt_stream_read_xfer(stream_rx) > 0, 0);
+    }
+
+    drv_len += sizeof(tusb_desc_endpoint_t);
+    p_desc = tu_desc_next(p_desc);
+  }
+
+  return drv_len;
+}
+
+bool printerd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t *request) {
+  TU_VERIFY(request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE &&
+    request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS);
+
+  // GET_DEVICE_ID: wIndex = (interface_number << 8) | alt_setting
+  // GET_PORT_STATUS / SOFT_RESET: wIndex = interface_number
+  uint8_t itf_num;
+  if (TUSB_PRINTER_REQUEST_GET_DEVICE_ID == request->bRequest) {
+    itf_num = tu_u16_high(request->wIndex);
+  } else {
+    itf_num = tu_u16_low(request->wIndex);
+  }
+
+  // Find the printer instance index from the USB interface number
+  uint8_t itf = TUSB_INDEX_INVALID_8;
+  for (uint8_t i = 0; i < CFG_TUD_PRINTER; i++) {
+    if (_printer_itf[i].itf_num == itf_num) {
+      itf = i;
+      break;
+    }
+  }
+  TU_VERIFY(itf < CFG_TUD_PRINTER);
+
+  // https://www.usb.org/sites/default/files/usbprint11a021811.pdf
+  if (stage == CONTROL_STAGE_SETUP) {
+    switch (request->bRequest) {
+      case TUSB_PRINTER_REQUEST_GET_DEVICE_ID: {
+        const uint8_t *device_id = tud_printer_get_device_id_cb(itf);
+        TU_VERIFY(device_id);
+        const uint16_t total_len = (uint16_t)((device_id[0] << 8) | device_id[1]);
+        return tud_control_xfer(rhport, request, (void *)(uintptr_t)device_id, total_len);
+      }
+
+      case TUSB_PRINTER_REQUEST_GET_PORT_STATUS: {
+        static uint8_t port_status;
+        port_status = tud_printer_get_port_status_cb(itf);
+        return tud_control_xfer(rhport, request, &port_status, sizeof(port_status));
+      }
+
+      case TUSB_PRINTER_REQUEST_SOFT_RESET:
+        tud_printer_soft_reset_cb(itf);
+        tud_control_status(rhport, request);
+        return true;
+
+      default:
+        return false;
+    }
+  } else if (stage == CONTROL_STAGE_ACK) {
+    tud_printer_request_complete_cb(itf, request);
+  }
+
+  return true;
+}
+
+bool printerd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) {
+  (void)rhport;
+  (void)result;
+
+  uint8_t const itf = _find_itf(ep_addr);
+  TU_ASSERT(itf < CFG_TUD_PRINTER);
+  printer_interface_t *p = &_printer_itf[itf];
+
+  // Received new data
+  if (ep_addr == p->rx_stream.ep_addr) {
+    tu_edpt_stream_read_xfer_complete(&p->rx_stream, xferred_bytes);
+
+    if (!tu_edpt_stream_empty(&p->rx_stream)) {
+      tud_printer_rx_cb(itf);
+    }
+
+    tu_edpt_stream_read_xfer(&p->rx_stream);
+  }
+
+  // Data sent to host
+  if (ep_addr == p->tx_stream.ep_addr) {
+    tud_printer_tx_complete_cb(itf);
+
+    if (0 == tu_edpt_stream_write_xfer(&p->tx_stream)) {
+      tu_edpt_stream_write_zlp_if_needed(&p->tx_stream, xferred_bytes);
+    }
+  }
+
+  return true;
+}
+
+#endif
diff --git a/src/class/printer/printer_device.h b/src/class/printer/printer_device.h
new file mode 100644
index 000000000..afde1f022
--- /dev/null
+++ b/src/class/printer/printer_device.h
@@ -0,0 +1,151 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2026 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef TUSB_PRINTER_DEVICE_H_
+#define TUSB_PRINTER_DEVICE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "printer.h"
+
+//--------------------------------------------------------------------+
+// Configuration
+//--------------------------------------------------------------------+
+#ifndef CFG_TUD_PRINTER_RX_EPSIZE
+  #define CFG_TUD_PRINTER_RX_EPSIZE TUD_EPSIZE_BULK_MAX
+#endif
+
+#ifndef CFG_TUD_PRINTER_TX_EPSIZE
+  #define CFG_TUD_PRINTER_TX_EPSIZE TUD_EPSIZE_BULK_MAX
+#endif
+
+//--------------------------------------------------------------------+
+// Application API (Multiple Ports) i.e. CFG_TUD_PRINTER > 1
+//--------------------------------------------------------------------+
+
+// Get the number of bytes available for reading
+uint32_t tud_printer_n_read_available(uint8_t itf);
+
+// Read received bytes
+uint32_t tud_printer_n_read(uint8_t itf, void *buffer, uint32_t bufsize);
+
+// Get the number of bytes available for writing
+uint32_t tud_printer_n_write_available(uint8_t itf);
+
+// Clear the received FIFO
+void tud_printer_n_read_flush(uint8_t itf);
+
+// Get a byte from FIFO without removing it
+bool tud_printer_n_peek(uint8_t itf, uint8_t *ui8);
+
+// Write data to host
+uint32_t tud_printer_n_write(uint8_t itf, const void *buffer, uint32_t bufsize);
+
+// Force sending data in the TX FIFO
+uint32_t tud_printer_n_write_flush(uint8_t itf);
+
+// Clear the transmit FIFO
+bool tud_printer_n_write_clear(uint8_t itf);
+
+//--------------------------------------------------------------------+
+// Application API (Single Port)
+//--------------------------------------------------------------------+
+
+TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_printer_read_available(void) {
+  return tud_printer_n_read_available(0);
+}
+
+TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_printer_write_available(void) {
+  return tud_printer_n_write_available(0);
+}
+
+TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_printer_read(void *buffer, uint32_t bufsize) {
+  return tud_printer_n_read(0, buffer, bufsize);
+}
+
+TU_ATTR_ALWAYS_INLINE static inline void tud_printer_read_flush(void) {
+  tud_printer_n_read_flush(0);
+}
+
+TU_ATTR_ALWAYS_INLINE static inline bool tud_printer_peek(uint8_t *ui8) {
+  return tud_printer_n_peek(0, ui8);
+}
+
+TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_printer_write(const void *buffer, uint32_t bufsize) {
+  return tud_printer_n_write(0, buffer, bufsize);
+}
+
+TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_printer_write_flush(void) {
+  return tud_printer_n_write_flush(0);
+}
+
+TU_ATTR_ALWAYS_INLINE static inline bool tud_printer_write_clear(void) {
+  return tud_printer_n_write_clear(0);
+}
+
+//--------------------------------------------------------------------+
+// Application Callback API (weak is optional)
+//--------------------------------------------------------------------+
+
+// Invoked when received new data
+void tud_printer_rx_cb(uint8_t itf);
+
+// Invoked when last write transfer is completed
+void tud_printer_tx_complete_cb(uint8_t itf);
+
+// Invoked when host requests device ID string (IEEE 1284).
+// Application returns pointer to device ID buffer (must remain valid until transfer completes).
+// First 2 bytes of returned buffer must contain big-endian length (including the 2 length bytes).
+const uint8_t *tud_printer_get_device_id_cb(uint8_t itf);
+
+// Invoked when host requests port status.
+uint8_t tud_printer_get_port_status_cb(uint8_t itf);
+
+// Invoked when host requests soft reset.
+void tud_printer_soft_reset_cb(uint8_t itf);
+
+// Invoked when a control request is completed (GET_DEVICE_ID, GET_PORT_STATUS, etc.)
+void tud_printer_request_complete_cb(uint8_t itf, tusb_control_request_t const *request);
+
+
+//--------------------------------------------------------------------+
+// Internal Class Driver API
+//--------------------------------------------------------------------+
+void     printerd_init(void);
+bool     printerd_deinit(void);
+void     printerd_reset(uint8_t rhport);
+uint16_t printerd_open(uint8_t rhport, const tusb_desc_interface_t *itf_desc, uint16_t max_len);
+bool     printerd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t *request);
+bool     printerd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif