diff options
Diffstat (limited to 'src/common')
| -rw-r--r-- | src/common/tusb_mcu.h | 27 | ||||
| -rw-r--r-- | src/common/tusb_types.h | 2 |
2 files changed, 28 insertions, 1 deletions
diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index b8d883dde..af43dfb12 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -126,6 +126,14 @@ #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #endif + // Errata ERR050101, listed for RT1015/RT1020/RT1024/RT1050 (no fix scheduled) and for + // RT1060/RT1064 rev A (fixed in rev B); not listed for RT1010 or the RT11xx family. + #if defined(MIMXRT1015_SERIES) || defined(MIMXRT1021_SERIES) || defined(MIMXRT1024_SERIES) || \ + defined(MIMXRT1051_SERIES) || defined(MIMXRT1052_SERIES) || defined(MIMXRT1061_SERIES) || \ + defined(MIMXRT1062_SERIES) || defined(MIMXRT1064_SERIES) + #define CFG_TUSB_MIMXRT1XXX_ERRATA_ERR050101 1 + #endif + #elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32L, OPT_MCU_KINETIS_K) #define TUP_USBIP_CHIPIDEA_FS #define TUP_USBIP_CHIPIDEA_FS_KINETIS @@ -716,6 +724,14 @@ // Possible to share IN/OUT if only one direction is armed at any one time #define CFG_TUD_ENDPOINT_ONE_DIRECTION_ONLY 1 +//--------------------------------------------------------------------+ +// Geehy +//--------------------------------------------------------------------+ +#elif TU_CHECK_MCU(OPT_MCU_APM32F0XX) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_APM32 + #define CFG_TUSB_FSDEV_PMA_SIZE 1024u + #endif // External USB controller @@ -760,6 +776,17 @@ #define TUP_DCD_EDPT_ISO_ALLOC #endif +// Set by silicon whose isochronous IN endpoint can be unprimed by an IN token sent to that same +// endpoint number on ANOTHER device sharing the host, taking one of this device's OUT endpoints +// down with it - undetectable in software. Descriptors must then give an isochronous IN endpoint +// a number no other device on the bus uses; a number is only safe while it stays unique, so two +// affected boards on one hub must not pick the same one. Default 0 (no such conflict). Set it to +// 0 by hand on RT1060/RT1064 rev B, which carry the fix - the revision cannot be told apart at +// compile time, so the affected parts are assumed to be rev A. +#ifndef CFG_TUSB_MIMXRT1XXX_ERRATA_ERR050101 + #define CFG_TUSB_MIMXRT1XXX_ERRATA_ERR050101 0 +#endif + // Some USBIPs (SAMG, SAMX7X, PIC32, MAX3266x/MAX78002) cannot assign the same endpoint // number to both IN and OUT. Default to 0 (same endpoint number may be used for IN and OUT). #ifndef CFG_TUD_ENDPOINT_ONE_DIRECTION_ONLY diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index d49d277ed..fa4d67df1 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -244,7 +244,7 @@ enum { TUSB_DESC_CONFIG_ATT_SELF_POWERED = 1 << 6, }; -#define TUSB_DESC_CONFIG_POWER_MA(x) ((x)/2) +#define TUSB_DESC_CONFIG_POWER_MA(x) ((uint8_t)TU_MIN((x)/2, UINT8_MAX)) // USB 2.0 Spec Table 9-7: Test Mode Selectors typedef enum { |