diff options
Diffstat (limited to 'src/common')
| -rw-r--r-- | src/common/tusb_common.h | 1 | ||||
| -rw-r--r-- | src/common/tusb_compiler.h | 3 | ||||
| -rw-r--r-- | src/common/tusb_fifo.c | 31 | ||||
| -rw-r--r-- | src/common/tusb_fifo.h | 16 | ||||
| -rw-r--r-- | src/common/tusb_mcu.h | 96 | ||||
| -rw-r--r-- | src/common/tusb_types.h | 40 | ||||
| -rw-r--r-- | src/common/tusb_verify.h | 18 |
7 files changed, 150 insertions, 55 deletions
diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 1f08ce4ed..0d4082c03 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -65,6 +65,7 @@ // Standard Headers #include <stdbool.h> #include <stdint.h> +#include <inttypes.h> #include <stddef.h> #include <string.h> #include <stdio.h> diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 6f07bdd53..ce5566ffe 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -56,7 +56,7 @@ #elif defined (__STDC_VERSION__) && __STDC_VERSION__ >= 201112L #define TU_VERIFY_STATIC _Static_assert #elif defined(__CCRX__) - #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT(Line, __LINE__)[(const_expr) ? 1 : 0]; + #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT(_verify_static_, _TU_COUNTER_)[(const_expr) ? 1 : 0]; #else #define TU_VERIFY_STATIC(const_expr, _mess) enum { TU_XSTRCAT(_verify_static_, _TU_COUNTER_) = 1/(!!(const_expr)) } #endif @@ -128,6 +128,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f)) #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #endif diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 76696396b..8a0fd4417 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -62,7 +62,9 @@ TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) typedef enum { TU_FIFO_COPY_INC, ///< Copy from/to an increasing source/destination address - default mode +#ifdef TUP_MEM_CONST_ADDR TU_FIFO_COPY_CST_FULL_WORDS, ///< Copy from/to a constant source/destination address - required for e.g. STM32 to write into USB hardware FIFO +#endif } tu_fifo_copy_mode_t; bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_size, bool overwritable) @@ -92,6 +94,7 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Pull & Push //--------------------------------------------------------------------+ +#ifdef TUP_MEM_CONST_ADDR // Intended to be used to read from hardware USB FIFO in e.g. STM32 where all data is read from a constant address // Code adapted from dcd_synopsys.c // TODO generalize with configurable 1 byte or 4 byte each read @@ -140,6 +143,7 @@ static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t *reg_tx = tmp32; } } +#endif // send one item to fifo WITHOUT updating write pointer static inline void _ff_push(tu_fifo_t* f, void const * app_buf, uint16_t rel) @@ -179,7 +183,7 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t memcpy(f->buffer, ((uint8_t const*) app_buf) + lin_bytes, wrap_bytes); } break; - +#ifdef TUP_MEM_CONST_ADDR case TU_FIFO_COPY_CST_FULL_WORDS: // Intended for hardware buffers from which it can be read word by word only if(n <= lin_count) @@ -224,6 +228,7 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t if (wrap_bytes > 0) _ff_push_const_addr(ff_buf, app_buf, wrap_bytes); } break; +#endif default: break; } } @@ -265,7 +270,7 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, memcpy((uint8_t*) app_buf + lin_bytes, f->buffer, wrap_bytes); } break; - +#ifdef TUP_MEM_CONST_ADDR case TU_FIFO_COPY_CST_FULL_WORDS: if ( n <= lin_count ) { @@ -310,6 +315,7 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, // Read data wrapped part if (wrap_bytes > 0) _ff_pull_const_addr(app_buf, ff_buf, wrap_bytes); } +#endif break; default: break; @@ -727,10 +733,29 @@ uint16_t tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n) return _tu_fifo_read_n(f, buffer, n, TU_FIFO_COPY_INC); } +#ifdef TUP_MEM_CONST_ADDR +/******************************************************************************/ +/*! + @brief This function will read n elements from the array index specified by + the read pointer and increment the read index. + This function checks for an overflow and corrects read pointer if required. + The dest address will not be incremented which is useful for writing to registers. + + @param[in] f + Pointer to the FIFO buffer to manipulate + @param[in] buffer + The pointer to data location + @param[in] n + Number of element that buffer can afford + + @returns number of items read from the FIFO + */ +/******************************************************************************/ uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t* f, void * buffer, uint16_t n) { return _tu_fifo_read_n(f, buffer, n, TU_FIFO_COPY_CST_FULL_WORDS); } +#endif /******************************************************************************/ /*! @@ -839,6 +864,7 @@ uint16_t tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n) return _tu_fifo_write_n(f, data, n, TU_FIFO_COPY_INC); } +#ifdef TUP_MEM_CONST_ADDR /******************************************************************************/ /*! @brief This function will write n elements into the array index specified by @@ -858,6 +884,7 @@ uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t* f, const void * data, { return _tu_fifo_write_n(f, data, n, TU_FIFO_COPY_CST_FULL_WORDS); } +#endif /******************************************************************************/ /*! diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 2d9f5e667..6c0efb509 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -145,22 +145,26 @@ bool tu_fifo_clear(tu_fifo_t *f); bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_size, bool overwritable); #if OSAL_MUTEX_REQUIRED - TU_ATTR_ALWAYS_INLINE static inline - void tu_fifo_config_mutex(tu_fifo_t *f, osal_mutex_t wr_mutex, osal_mutex_t rd_mutex) { - f->mutex_wr = wr_mutex; - f->mutex_rd = rd_mutex; - } +TU_ATTR_ALWAYS_INLINE static inline +void tu_fifo_config_mutex(tu_fifo_t *f, osal_mutex_t wr_mutex, osal_mutex_t rd_mutex) { + f->mutex_wr = wr_mutex; + f->mutex_rd = rd_mutex; +} #else - #define tu_fifo_config_mutex(_f, _wr_mutex, _rd_mutex) +#define tu_fifo_config_mutex(_f, _wr_mutex, _rd_mutex) #endif bool tu_fifo_write (tu_fifo_t* f, void const * p_data); uint16_t tu_fifo_write_n (tu_fifo_t* f, void const * p_data, uint16_t n); +#ifdef TUP_MEM_CONST_ADDR uint16_t tu_fifo_write_n_const_addr_full_words (tu_fifo_t* f, const void * data, uint16_t n); +#endif bool tu_fifo_read (tu_fifo_t* f, void * p_buffer); uint16_t tu_fifo_read_n (tu_fifo_t* f, void * p_buffer, uint16_t n); +#ifdef TUP_MEM_CONST_ADDR uint16_t tu_fifo_read_n_const_addr_full_words (tu_fifo_t* f, void * buffer, uint16_t n); +#endif bool tu_fifo_peek (tu_fifo_t* f, void * p_buffer); uint16_t tu_fifo_peek_n (tu_fifo_t* f, void * p_buffer, uint16_t n); diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 0ae2573cd..637281bfc 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -269,16 +269,23 @@ #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32U5) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_STM32 + #if defined (STM32U535xx) || defined (STM32U545xx) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define TUP_DCD_ENDPOINT_MAX 8 - // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY - #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ - defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) - #define TUP_DCD_ENDPOINT_MAX 9 - #define TUP_RHPORT_HIGHSPEED 1 #else - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY + #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ + defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 + #else + #define TUP_DCD_ENDPOINT_MAX 6 + #endif #endif #elif TU_CHECK_MCU(OPT_MCU_STM32L5) @@ -329,6 +336,9 @@ #define TUP_USBIP_DWC2 #define TUP_DCD_ENDPOINT_MAX 6 +#elif TU_CHECK_MCU(OPT_MCU_ESP32, OPT_MCU_ESP32C2, OPT_MCU_ESP32C3, OPT_MCU_ESP32C6, OPT_MCU_ESP32H2) && (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) + #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" + //--------------------------------------------------------------------+ // Dialog //--------------------------------------------------------------------+ @@ -396,16 +406,66 @@ #elif TU_CHECK_MCU(OPT_MCU_F1C100S) #define TUP_DCD_ENDPOINT_MAX 4 -//------------- WCH -------------// +//--------------------------------------------------------------------+ +// WCH +//--------------------------------------------------------------------+ +#elif TU_CHECK_MCU(OPT_MCU_CH32F20X) + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif + + #if !defined(CFG_TUD_WCH_USBIP_USBHS) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif + + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + +#elif TU_CHECK_MCU(OPT_MCU_CH32V103) + #define TUP_USBIP_WCH_USBFS + + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 1 + #endif + + #define TUP_DCD_ENDPOINT_MAX 8 + +#elif TU_CHECK_MCU(OPT_MCU_CH32V20X) + // v20x support both FSDEV (USBD) and USBFS, default to FSDEV + #define TUP_USBIP_WCH_USBFS + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_CH32 + + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif + + #if !defined(CFG_TUD_WCH_USBIP_FSDEV) + #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif + + #define TUP_DCD_ENDPOINT_MAX 8 + #elif TU_CHECK_MCU(OPT_MCU_CH32V307) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 + // v307 support both FS and HS, default to HS + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS -#elif TU_CHECK_MCU(OPT_MCU_CH32F20X) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 -#endif + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif + #if !defined(CFG_TUD_WCH_USBIP_USBHS) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif + + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + +#endif //--------------------------------------------------------------------+ // External USB controller @@ -426,7 +486,7 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#ifndef TUP_DCD_ENDPOINT_MAX +#if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif @@ -445,4 +505,8 @@ #define TUP_DCD_EDPT_ISO_ALLOC #endif +#if defined(TUP_USBIP_DWC2) + #define TUP_MEM_CONST_ADDR +#endif + #endif diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 2c5dce723..1501a5af6 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -24,12 +24,8 @@ * This file is part of the TinyUSB stack. */ -/** \ingroup group_usb_definitions - * \defgroup USBDef_Type USB Types - * @{ */ - -#ifndef _TUSB_TYPES_H_ -#define _TUSB_TYPES_H_ +#ifndef TUSB_TYPES_H_ +#define TUSB_TYPES_H_ #include <stdbool.h> #include <stdint.h> @@ -212,12 +208,21 @@ typedef enum { } device_capability_type_t; enum { - TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP = TU_BIT(5), - TUSB_DESC_CONFIG_ATT_SELF_POWERED = TU_BIT(6), + TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP = 1u << 5, + TUSB_DESC_CONFIG_ATT_SELF_POWERED = 1u << 6, }; #define TUSB_DESC_CONFIG_POWER_MA(x) ((x)/2) +// USB 2.0 Spec Table 9-7: Test Mode Selectors +typedef enum { + TUSB_FEATURE_TEST_J = 1, + TUSB_FEATURE_TEST_K, + TUSB_FEATURE_TEST_SE0_NAK, + TUSB_FEATURE_TEST_PACKET, + TUSB_FEATURE_TEST_FORCE_ENABLE, +} tusb_feature_test_mode_t; + //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ @@ -274,11 +279,11 @@ TU_ATTR_BIT_FIELD_ORDER_BEGIN typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor in bytes. uint8_t bDescriptorType ; ///< DEVICE Descriptor Type. - uint16_t bcdUSB ; ///< BUSB Specification Release Number in Binary-Coded Decimal (i.e., 2.10 is 210H). This field identifies the release of the USB Specification with which the device and its descriptors are compliant. + uint16_t bcdUSB ; ///< BUSB Specification Release Number in Binary-Coded Decimal (i.e., 2.10 is 210H). - uint8_t bDeviceClass ; ///< Class code (assigned by the USB-IF). \li If this field is reset to zero, each interface within a configuration specifies its own class information and the various interfaces operate independently. \li If this field is set to a value between 1 and FEH, the device supports different class specifications on different interfaces and the interfaces may not operate independently. This value identifies the class definition used for the aggregate interfaces. \li If this field is set to FFH, the device class is vendor-specific. - uint8_t bDeviceSubClass ; ///< Subclass code (assigned by the USB-IF). These codes are qualified by the value of the bDeviceClass field. \li If the bDeviceClass field is reset to zero, this field must also be reset to zero. \li If the bDeviceClass field is not set to FFH, all values are reserved for assignment by the USB-IF. - uint8_t bDeviceProtocol ; ///< Protocol code (assigned by the USB-IF). These codes are qualified by the value of the bDeviceClass and the bDeviceSubClass fields. If a device supports class-specific protocols on a device basis as opposed to an interface basis, this code identifies the protocols that the device uses as defined by the specification of the device class. \li If this field is reset to zero, the device does not use class-specific protocols on a device basis. However, it may use classspecific protocols on an interface basis. \li If this field is set to FFH, the device uses a vendor-specific protocol on a device basis. + uint8_t bDeviceClass ; ///< Class code (assigned by the USB-IF). + uint8_t bDeviceSubClass ; ///< Subclass code (assigned by the USB-IF). + uint8_t bDeviceProtocol ; ///< Protocol code (assigned by the USB-IF). uint8_t bMaxPacketSize0 ; ///< Maximum packet size for endpoint zero (only 8, 16, 32, or 64 are valid). For HS devices is fixed to 64. uint16_t idVendor ; ///< Vendor ID (assigned by the USB-IF). @@ -493,15 +498,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_addr(uint8_t num, uint8_t di } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_packet_size(tusb_desc_endpoint_t const* desc_ep) { - return tu_le16toh(desc_ep->wMaxPacketSize) & TU_GENMASK(10, 0); + return tu_le16toh(desc_ep->wMaxPacketSize) & 0x7FF; } #if CFG_TUSB_DEBUG -TU_ATTR_ALWAYS_INLINE static inline const char *tu_edpt_dir_str(tusb_dir_t dir) { - tu_static const char *str[] = {"out", "in"}; - return str[dir]; -} - TU_ATTR_ALWAYS_INLINE static inline const char *tu_edpt_type_str(tusb_xfer_type_t t) { tu_static const char *str[] = {"control", "isochronous", "bulk", "interrupt"}; return str[t]; @@ -541,6 +541,4 @@ uint8_t const * tu_desc_find3(uint8_t const* desc, uint8_t const* end, uint8_t b } #endif -#endif /* _TUSB_TYPES_H_ */ - -/** @} */ +#endif // TUSB_TYPES_H_ diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 8aa66b4df..4344575b7 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -56,8 +56,8 @@ * #define TU_VERIFY(cond) if(cond) return false; * #define TU_VERIFY(cond,ret) if(cond) return ret; * - * #define TU_ASSERT(cond) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return false;} - * #define TU_ASSERT(cond,ret) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return ret;} + * #define TU_ASSERT(cond) if(cond) {TU_MESS_FAILED(); TU_BREAKPOINT(), return false;} + * #define TU_ASSERT(cond,ret) if(cond) {TU_MESS_FAILED(); TU_BREAKPOINT(), return ret;} *------------------------------------------------------------------*/ #ifdef __cplusplus @@ -70,20 +70,20 @@ #if CFG_TUSB_DEBUG #include <stdio.h> - #define _MESS_FAILED() tu_printf("%s %d: ASSERT FAILED\r\n", __func__, __LINE__) + #define TU_MESS_FAILED() tu_printf("%s %d: ASSERT FAILED\r\n", __func__, __LINE__) #else - #define _MESS_FAILED() do {} while (0) + #define TU_MESS_FAILED() do {} while (0) #endif // Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7, M33. M55 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) - #define TU_BREAKPOINT() do \ - { \ +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) || \ + defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ } while(0) -#elif defined(__riscv) +#elif defined(__riscv) && !TUP_MCU_ESPRESSIF #define TU_BREAKPOINT() do { __asm("ebreak\n"); } while(0) #elif defined(_mips) @@ -119,7 +119,7 @@ *------------------------------------------------------------------*/ #define TU_ASSERT_DEFINE(_cond, _ret) \ do { \ - if ( !(_cond) ) { _MESS_FAILED(); TU_BREAKPOINT(); return _ret; } \ + if ( !(_cond) ) { TU_MESS_FAILED(); TU_BREAKPOINT(); return _ret; } \ } while(0) #define TU_ASSERT_1ARGS(_cond) TU_ASSERT_DEFINE(_cond, false) |