diff options
Diffstat (limited to 'src/device')
| -rw-r--r-- | src/device/dcd.h | 136 | ||||
| -rw-r--r-- | src/device/usbd.c | 1204 | ||||
| -rw-r--r-- | src/device/usbd.h | 100 | ||||
| -rw-r--r-- | src/device/usbd_control.c | 152 | ||||
| -rw-r--r-- | src/device/usbd_pvt.h | 46 |
5 files changed, 897 insertions, 741 deletions
diff --git a/src/device/dcd.h b/src/device/dcd.h index c1780f656..789552d47 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_DCD_H_ -#define _TUSB_DCD_H_ +#ifndef TUSB_DCD_H_ +#define TUSB_DCD_H_ #include "common/tusb_common.h" #include "osal/osal.h" @@ -36,42 +36,27 @@ #endif //--------------------------------------------------------------------+ -// Configuration -//--------------------------------------------------------------------+ - -#ifndef CFG_TUD_ENDPPOINT_MAX - #define CFG_TUD_ENDPPOINT_MAX TUP_DCD_ENDPOINT_MAX -#endif - -//--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -typedef enum -{ - DCD_EVENT_INVALID = 0, - DCD_EVENT_BUS_RESET, - DCD_EVENT_UNPLUGGED, - DCD_EVENT_SOF, - DCD_EVENT_SUSPEND, // TODO LPM Sleep L1 support - DCD_EVENT_RESUME, - - DCD_EVENT_SETUP_RECEIVED, - DCD_EVENT_XFER_COMPLETE, - - // Not an DCD event, just a convenient way to defer ISR function - USBD_EVENT_FUNC_CALL, - +typedef enum { + DCD_EVENT_INVALID = 0, // 0 + DCD_EVENT_BUS_RESET, // 1 + DCD_EVENT_UNPLUGGED, // 2 + DCD_EVENT_SOF, // 3 + DCD_EVENT_SUSPEND, // 4 TODO LPM Sleep L1 support + DCD_EVENT_RESUME, // 5 + DCD_EVENT_SETUP_RECEIVED, // 6 + DCD_EVENT_XFER_COMPLETE, // 7 + USBD_EVENT_FUNC_CALL, // 8 Not an DCD event, just a convenient way to defer ISR function DCD_EVENT_COUNT } dcd_eventid_t; -typedef struct TU_ATTR_ALIGNED(4) -{ +typedef struct TU_ATTR_ALIGNED(4) { uint8_t rhport; uint8_t event_id; - union - { + union { // BUS RESET struct { tusb_speed_t speed; @@ -103,11 +88,30 @@ typedef struct TU_ATTR_ALIGNED(4) //TU_VERIFY_STATIC(sizeof(dcd_event_t) <= 12, "size is not correct"); //--------------------------------------------------------------------+ +// Memory API +//--------------------------------------------------------------------+ + +// clean/flush data cache: write cache -> memory. +// Required before an DMA TX transfer to make sure data is in memory +bool dcd_dcache_clean(const void* addr, uint32_t data_size); + +// invalidate data cache: mark cache as invalid, next read will read from memory +// Required BOTH before and after an DMA RX transfer +bool dcd_dcache_invalidate(const void* addr, uint32_t data_size); + +// clean and invalidate data cache +// Required before an DMA transfer where memory is both read/write by DMA +bool dcd_dcache_clean_invalidate(const void* addr, uint32_t data_size); + +//--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ // Initialize controller to device mode -void dcd_init (uint8_t rhport); +bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); + +// Deinitialize controller, unset device mode. +bool dcd_deinit(uint8_t rhport); // Interrupt Handler void dcd_int_handler(uint8_t rhport); @@ -125,21 +129,25 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr); void dcd_remote_wakeup(uint8_t rhport); // Connect by enabling internal pull-up resistor on D+/D- -void dcd_connect(uint8_t rhport) TU_ATTR_WEAK; +void dcd_connect(uint8_t rhport); // Disconnect by disabling internal pull-up resistor on D+/D- -void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK; +void dcd_disconnect(uint8_t rhport); // Enable/Disable Start-of-frame interrupt. Default is disabled void dcd_sof_enable(uint8_t rhport, bool en); +#if CFG_TUD_TEST_MODE +// Put device into a test mode (needs power cycle to quit) +void dcd_enter_test_mode(uint8_t rhport, tusb_feature_test_mode_t test_selector); +#endif //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ // Invoked when a control transfer's status stage is complete. // May help DCD to prepare for next control transfer, this API is optional. -void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * request) TU_ATTR_WEAK; +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * request); // Configure endpoint's registers according to descriptor bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_ep); @@ -149,10 +157,6 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc // required for multiple configuration support. void dcd_edpt_close_all (uint8_t rhport); -// Close an endpoint. -// Since it is weak, caller must TU_ASSERT this function's existence before calling it. -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) TU_ATTR_WEAK; - // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes); @@ -167,6 +171,20 @@ void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr); // This API never calls with control endpoints, since it is auto cleared when receiving setup packet void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr); +#ifdef TUP_DCD_EDPT_ISO_ALLOC +// Allocate packet buffer used by ISO endpoints +// Some MCU need manual packet buffer allocation, we allocate the largest size to avoid clustering +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size); + +// Configure and enable an ISO endpoint according to descriptor +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep); + +#else +// Close an endpoint. +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr); + +#endif + //--------------------------------------------------------------------+ // Event API (implemented by stack) //--------------------------------------------------------------------+ @@ -175,44 +193,46 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr); extern void dcd_event_handler(dcd_event_t const * event, bool in_isr); // helper to send bus signal event -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr) -{ - dcd_event_t event = { .rhport = rhport, .event_id = eid }; +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr) { + dcd_event_t event; + event.rhport = rhport; + event.event_id = eid; dcd_event_handler(&event, in_isr); } // helper to send bus reset event -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr) -{ - dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_BUS_RESET }; +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr) { + dcd_event_t event; + event.rhport = rhport; + event.event_id = DCD_EVENT_BUS_RESET; event.bus_reset.speed = speed; dcd_event_handler(&event, in_isr); } // helper to send setup received -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr) -{ - dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SETUP_RECEIVED }; - memcpy(&event.setup_received, setup, 8); - +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr) { + dcd_event_t event; + event.rhport = rhport; + event.event_id = DCD_EVENT_SETUP_RECEIVED; + memcpy(&event.setup_received, setup, sizeof(tusb_control_request_t)); dcd_event_handler(&event, in_isr); } // helper to send transfer complete event -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr) -{ - dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_XFER_COMPLETE }; - +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr) { + dcd_event_t event; + event.rhport = rhport; + event.event_id = DCD_EVENT_XFER_COMPLETE; event.xfer_complete.ep_addr = ep_addr; event.xfer_complete.len = xferred_bytes; event.xfer_complete.result = result; - dcd_event_handler(&event, in_isr); } -static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_isr) -{ - dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SOF }; +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_isr) { + dcd_event_t event; + event.rhport = rhport; + event.event_id = DCD_EVENT_SOF; event.sof.frame_count = frame_count; dcd_event_handler(&event, in_isr); } @@ -221,4 +241,4 @@ static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_i } #endif -#endif /* _TUSB_DCD_H_ */ +#endif diff --git a/src/device/usbd.c b/src/device/usbd.c index 1cede1289..20f803563 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -38,25 +38,89 @@ //--------------------------------------------------------------------+ // USBD Configuration //--------------------------------------------------------------------+ - -// Debug level of USBD -#define USBD_DBG 2 - #ifndef CFG_TUD_TASK_QUEUE_SZ #define CFG_TUD_TASK_QUEUE_SZ 16 #endif //--------------------------------------------------------------------+ +// Weak stubs: invoked if no strong implementation is available +//--------------------------------------------------------------------+ +TU_ATTR_WEAK void tud_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr) { + (void) rhport; (void) eventid; (void) in_isr; +} + +TU_ATTR_WEAK void tud_sof_cb(uint32_t frame_count) { + (void) frame_count; +} + +TU_ATTR_WEAK uint8_t const* tud_descriptor_bos_cb(void) { + return NULL; +} + +TU_ATTR_WEAK uint8_t const* tud_descriptor_device_qualifier_cb(void) { + return NULL; +} + +TU_ATTR_WEAK uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index; + return NULL; +} + +TU_ATTR_WEAK void tud_mount_cb(void) { +} + +TU_ATTR_WEAK void tud_umount_cb(void) { +} + +TU_ATTR_WEAK void tud_suspend_cb(bool remote_wakeup_en) { + (void) remote_wakeup_en; +} + +TU_ATTR_WEAK void tud_resume_cb(void) { +} + +TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const* request) { + (void) rhport; (void) stage; (void) request; + return false; +} + +TU_ATTR_WEAK bool dcd_deinit(uint8_t rhport) { + (void) rhport; + return false; +} + +TU_ATTR_WEAK void dcd_connect(uint8_t rhport) { + (void) rhport; +} + +TU_ATTR_WEAK void dcd_disconnect(uint8_t rhport) { + (void) rhport; +} + +TU_ATTR_WEAK bool dcd_dcache_clean(const void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + return true; +} + +TU_ATTR_WEAK bool dcd_dcache_invalidate(const void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + return true; +} + +TU_ATTR_WEAK bool dcd_dcache_clean_invalidate(const void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + return true; +} + +//--------------------------------------------------------------------+ // Device Data //--------------------------------------------------------------------+ // Invalid driver ID in itf2drv[] ep2drv[][] mapping enum { DRVID_INVALID = 0xFFu }; -typedef struct -{ - struct TU_ATTR_PACKED - { +typedef struct { + struct TU_ATTR_PACKED { volatile uint8_t connected : 1; volatile uint8_t addressed : 1; volatile uint8_t suspended : 1; @@ -65,9 +129,9 @@ typedef struct uint8_t remote_wakeup_support : 1; // configuration descriptor's attribute uint8_t self_powered : 1; // configuration descriptor's attribute }; - volatile uint8_t cfg_num; // current active configuration (0x00 is not configured) uint8_t speed; + volatile uint8_t sof_consumer; uint8_t itf2drv[CFG_TUD_INTERFACE_MAX]; // map interface number to driver (0xff is invalid) uint8_t ep2drv[CFG_TUD_ENDPPOINT_MAX][2]; // map endpoint to driver ( 0xff is invalid ), can use only 4-bit each @@ -76,208 +140,224 @@ typedef struct }usbd_device_t; -static usbd_device_t _usbd_dev; +tu_static usbd_device_t _usbd_dev; +static volatile uint8_t _usbd_queued_setup; //--------------------------------------------------------------------+ // Class Driver //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= 2 - #define DRIVER_NAME(_name) .name = _name, +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL + #define DRIVER_NAME(_name) _name #else - #define DRIVER_NAME(_name) + #define DRIVER_NAME(_name) NULL #endif // Built-in class drivers -static usbd_class_driver_t const _usbd_driver[] = -{ - #if CFG_TUD_CDC - { - DRIVER_NAME("CDC") - .init = cdcd_init, - .reset = cdcd_reset, - .open = cdcd_open, - .control_xfer_cb = cdcd_control_xfer_cb, - .xfer_cb = cdcd_xfer_cb, - .sof = NULL - }, - #endif +tu_static usbd_class_driver_t const _usbd_driver[] = { + #if CFG_TUD_CDC + { + .name = DRIVER_NAME("CDC"), + .init = cdcd_init, + .deinit = cdcd_deinit, + .reset = cdcd_reset, + .open = cdcd_open, + .control_xfer_cb = cdcd_control_xfer_cb, + .xfer_cb = cdcd_xfer_cb, + .sof = NULL + }, + #endif - #if CFG_TUD_MSC - { - DRIVER_NAME("MSC") - .init = mscd_init, - .reset = mscd_reset, - .open = mscd_open, - .control_xfer_cb = mscd_control_xfer_cb, - .xfer_cb = mscd_xfer_cb, - .sof = NULL - }, - #endif + #if CFG_TUD_MSC + { + .name = DRIVER_NAME("MSC"), + .init = mscd_init, + .deinit = NULL, + .reset = mscd_reset, + .open = mscd_open, + .control_xfer_cb = mscd_control_xfer_cb, + .xfer_cb = mscd_xfer_cb, + .sof = NULL + }, + #endif - #if CFG_TUD_HID - { - DRIVER_NAME("HID") - .init = hidd_init, - .reset = hidd_reset, - .open = hidd_open, - .control_xfer_cb = hidd_control_xfer_cb, - .xfer_cb = hidd_xfer_cb, - .sof = NULL - }, - #endif + #if CFG_TUD_HID + { + .name = DRIVER_NAME("HID"), + .init = hidd_init, + .deinit = hidd_deinit, + .reset = hidd_reset, + .open = hidd_open, + .control_xfer_cb = hidd_control_xfer_cb, + .xfer_cb = hidd_xfer_cb, + .sof = NULL + }, + #endif - #if CFG_TUD_AUDIO - { - DRIVER_NAME("AUDIO") - .init = audiod_init, - .reset = audiod_reset, - .open = audiod_open, - .control_xfer_cb = audiod_control_xfer_cb, - .xfer_cb = audiod_xfer_cb, - .sof = audiod_sof_isr - }, - #endif + #if CFG_TUD_AUDIO + { + .name = DRIVER_NAME("AUDIO"), + .init = audiod_init, + .deinit = audiod_deinit, + .reset = audiod_reset, + .open = audiod_open, + .control_xfer_cb = audiod_control_xfer_cb, + .xfer_cb = audiod_xfer_cb, + .sof = audiod_sof_isr + }, + #endif - #if CFG_TUD_VIDEO - { - DRIVER_NAME("VIDEO") - .init = videod_init, - .reset = videod_reset, - .open = videod_open, - .control_xfer_cb = videod_control_xfer_cb, - .xfer_cb = videod_xfer_cb, - .sof = NULL - }, - #endif + #if CFG_TUD_VIDEO + { + .name = DRIVER_NAME("VIDEO"), + .init = videod_init, + .deinit = videod_deinit, + .reset = videod_reset, + .open = videod_open, + .control_xfer_cb = videod_control_xfer_cb, + .xfer_cb = videod_xfer_cb, + .sof = NULL + }, + #endif - #if CFG_TUD_MIDI - { - DRIVER_NAME("MIDI") - .init = midid_init, - .open = midid_open, - .reset = midid_reset, - .control_xfer_cb = midid_control_xfer_cb, - .xfer_cb = midid_xfer_cb, - .sof = NULL - }, - #endif + #if CFG_TUD_MIDI + { + .name = DRIVER_NAME("MIDI"), + .init = midid_init, + .deinit = midid_deinit, + .open = midid_open, + .reset = midid_reset, + .control_xfer_cb = midid_control_xfer_cb, + .xfer_cb = midid_xfer_cb, + .sof = NULL + }, + #endif - #if CFG_TUD_VENDOR - { - DRIVER_NAME("VENDOR") - .init = vendord_init, - .reset = vendord_reset, - .open = vendord_open, - .control_xfer_cb = tud_vendor_control_xfer_cb, - .xfer_cb = vendord_xfer_cb, - .sof = NULL - }, - #endif + #if CFG_TUD_VENDOR + { + .name = DRIVER_NAME("VENDOR"), + .init = vendord_init, + .deinit = vendord_deinit, + .reset = vendord_reset, + .open = vendord_open, + .control_xfer_cb = tud_vendor_control_xfer_cb, + .xfer_cb = vendord_xfer_cb, + .sof = NULL + }, + #endif - #if CFG_TUD_USBTMC - { - DRIVER_NAME("TMC") - .init = usbtmcd_init_cb, - .reset = usbtmcd_reset_cb, - .open = usbtmcd_open_cb, - .control_xfer_cb = usbtmcd_control_xfer_cb, - .xfer_cb = usbtmcd_xfer_cb, - .sof = NULL - }, - #endif + #if CFG_TUD_USBTMC + { + .name = DRIVER_NAME("TMC"), + .init = usbtmcd_init_cb, + .deinit = usbtmcd_deinit, + .reset = usbtmcd_reset_cb, + .open = usbtmcd_open_cb, + .control_xfer_cb = usbtmcd_control_xfer_cb, + .xfer_cb = usbtmcd_xfer_cb, + .sof = NULL + }, + #endif - #if CFG_TUD_DFU_RUNTIME - { - DRIVER_NAME("DFU-RUNTIME") - .init = dfu_rtd_init, - .reset = dfu_rtd_reset, - .open = dfu_rtd_open, - .control_xfer_cb = dfu_rtd_control_xfer_cb, - .xfer_cb = NULL, - .sof = NULL - }, - #endif + #if CFG_TUD_DFU_RUNTIME + { + .name = DRIVER_NAME("DFU-RUNTIME"), + .init = dfu_rtd_init, + .deinit = dfu_rtd_deinit, + .reset = dfu_rtd_reset, + .open = dfu_rtd_open, + .control_xfer_cb = dfu_rtd_control_xfer_cb, + .xfer_cb = NULL, + .sof = NULL + }, + #endif - #if CFG_TUD_DFU - { - DRIVER_NAME("DFU") - .init = dfu_moded_init, - .reset = dfu_moded_reset, - .open = dfu_moded_open, - .control_xfer_cb = dfu_moded_control_xfer_cb, - .xfer_cb = NULL, - .sof = NULL - }, - #endif + #if CFG_TUD_DFU + { + .name = DRIVER_NAME("DFU"), + .init = dfu_moded_init, + .deinit = dfu_moded_deinit, + .reset = dfu_moded_reset, + .open = dfu_moded_open, + .control_xfer_cb = dfu_moded_control_xfer_cb, + .xfer_cb = NULL, + .sof = NULL + }, + #endif - #if CFG_TUD_ECM_RNDIS || CFG_TUD_NCM - { - DRIVER_NAME("NET") - .init = netd_init, - .reset = netd_reset, - .open = netd_open, - .control_xfer_cb = netd_control_xfer_cb, - .xfer_cb = netd_xfer_cb, - .sof = NULL, - }, - #endif + #if CFG_TUD_ECM_RNDIS || CFG_TUD_NCM + { + .name = DRIVER_NAME("NET"), + .init = netd_init, + .deinit = netd_deinit, + .reset = netd_reset, + .open = netd_open, + .control_xfer_cb = netd_control_xfer_cb, + .xfer_cb = netd_xfer_cb, + .sof = NULL, + }, + #endif - #if CFG_TUD_BTH - { - DRIVER_NAME("BTH") - .init = btd_init, - .reset = btd_reset, - .open = btd_open, - .control_xfer_cb = btd_control_xfer_cb, - .xfer_cb = btd_xfer_cb, - .sof = NULL - }, - #endif + #if CFG_TUD_BTH + { + .name = DRIVER_NAME("BTH"), + .init = btd_init, + .deinit = btd_deinit, + .reset = btd_reset, + .open = btd_open, + .control_xfer_cb = btd_control_xfer_cb, + .xfer_cb = btd_xfer_cb, + .sof = NULL + }, + #endif }; enum { BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(_usbd_driver) }; // Additional class drivers implemented by application -static usbd_class_driver_t const * _app_driver = NULL; -static uint8_t _app_driver_count = 0; +tu_static usbd_class_driver_t const * _app_driver = NULL; +tu_static uint8_t _app_driver_count = 0; + +#define TOTAL_DRIVER_COUNT (_app_driver_count + BUILTIN_DRIVER_COUNT) // virtually joins built-in and application drivers together. // Application is positioned first to allow overwriting built-in ones. -static inline usbd_class_driver_t const * get_driver(uint8_t drvid) -{ - // Application drivers - if ( usbd_app_driver_get_cb ) - { - if ( drvid < _app_driver_count ) return &_app_driver[drvid]; - drvid -= _app_driver_count; +TU_ATTR_ALWAYS_INLINE static inline usbd_class_driver_t const * get_driver(uint8_t drvid) { + usbd_class_driver_t const * driver = NULL; + if ( drvid < _app_driver_count ) { + // Application drivers + driver = &_app_driver[drvid]; + } else if ( drvid < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0 ){ + driver = &_usbd_driver[drvid - _app_driver_count]; } - - // Built-in drivers - if (drvid < BUILTIN_DRIVER_COUNT) return &_usbd_driver[drvid]; - - return NULL; + return driver; } -#define TOTAL_DRIVER_COUNT (_app_driver_count + BUILTIN_DRIVER_COUNT) //--------------------------------------------------------------------+ // DCD Event //--------------------------------------------------------------------+ enum { RHPORT_INVALID = 0xFFu }; -static uint8_t _usbd_rhport = RHPORT_INVALID; +tu_static uint8_t _usbd_rhport = RHPORT_INVALID; // Event queue // usbd_int_set() is used as mutex in OS NONE config OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t); -static osal_queue_t _usbd_q; +tu_static osal_queue_t _usbd_q; -// Mutex for claiming endpoint, only needed when using with preempted RTOS -#if CFG_TUSB_OS != OPT_OS_NONE -static osal_mutex_def_t _ubsd_mutexdef; -static osal_mutex_t _usbd_mutex; +// Mutex for claiming endpoint +#if OSAL_MUTEX_REQUIRED + tu_static osal_mutex_def_t _ubsd_mutexdef; + tu_static osal_mutex_t _usbd_mutex; +#else + #define _usbd_mutex NULL #endif +TU_ATTR_ALWAYS_INLINE static inline bool queue_event(dcd_event_t const * event, bool in_isr) { + TU_ASSERT(osal_queue_send(_usbd_q, event, in_isr)); + tud_event_hook_cb(event->rhport, event->event_id, in_isr); + return true; +} //--------------------------------------------------------------------+ // Prototypes @@ -286,6 +366,16 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const static bool process_set_config(uint8_t rhport, uint8_t cfg_num); static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const * p_request); +#if CFG_TUD_TEST_MODE +static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) { + TU_VERIFY(CONTROL_STAGE_ACK == stage); + uint8_t const selector = tu_u16_high(request->wIndex); + TU_LOG_USBD(" Enter Test Mode (test selector index: %d)\r\n", selector); + dcd_enter_test_mode(rhport, (tusb_feature_test_mode_t) selector); + return true; +} +#endif + // from usbd_control.c void usbd_control_reset(void); void usbd_control_set_request(tusb_control_request_t const *request); @@ -296,29 +386,25 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t event, //--------------------------------------------------------------------+ // Debug //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= 2 -static char const* const _usbd_event_str[DCD_EVENT_COUNT] = -{ - "Invalid" , - "Bus Reset" , - "Unplugged" , - "SOF" , - "Suspend" , - "Resume" , - "Setup Received" , - "Xfer Complete" , - "Func Call" +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL +tu_static char const* const _usbd_event_str[DCD_EVENT_COUNT] = { + "Invalid", + "Bus Reset", + "Unplugged", + "SOF", + "Suspend", + "Resume", + "Setup Received", + "Xfer Complete", + "Func Call" }; // for usbd_control to print the name of control complete driver -void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback) -{ - for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) - { - usbd_class_driver_t const * driver = get_driver(i); - if ( driver && driver->control_xfer_cb == callback ) - { - TU_LOG(USBD_DBG, " %s control complete\r\n", driver->name); +void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback) { + for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { + usbd_class_driver_t const* driver = get_driver(i); + if (driver && driver->control_xfer_cb == callback) { + TU_LOG_USBD("%s control complete\r\n", driver->name); return; } } @@ -329,67 +415,67 @@ void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback) //--------------------------------------------------------------------+ // Application API //--------------------------------------------------------------------+ -tusb_speed_t tud_speed_get(void) -{ +tusb_speed_t tud_speed_get(void) { return (tusb_speed_t) _usbd_dev.speed; } -bool tud_connected(void) -{ +bool tud_connected(void) { return _usbd_dev.connected; } -bool tud_mounted(void) -{ +bool tud_mounted(void) { return _usbd_dev.cfg_num ? true : false; } -bool tud_suspended(void) -{ +bool tud_suspended(void) { return _usbd_dev.suspended; } -bool tud_remote_wakeup(void) -{ +bool tud_remote_wakeup(void) { // only wake up host if this feature is supported and enabled and we are suspended - TU_VERIFY (_usbd_dev.suspended && _usbd_dev.remote_wakeup_support && _usbd_dev.remote_wakeup_en ); + TU_VERIFY (_usbd_dev.suspended && _usbd_dev.remote_wakeup_support && _usbd_dev.remote_wakeup_en); dcd_remote_wakeup(_usbd_rhport); return true; } -bool tud_disconnect(void) -{ - TU_VERIFY(dcd_disconnect); +bool tud_disconnect(void) { dcd_disconnect(_usbd_rhport); return true; } -bool tud_connect(void) -{ - TU_VERIFY(dcd_connect); +bool tud_connect(void) { dcd_connect(_usbd_rhport); return true; } +void tud_sof_cb_enable(bool en) { + usbd_sof_enable(_usbd_rhport, SOF_CONSUMER_USER, en); +} + //--------------------------------------------------------------------+ // USBD Task //--------------------------------------------------------------------+ -bool tud_inited(void) -{ +bool tud_inited(void) { return _usbd_rhport != RHPORT_INVALID; } -bool tud_init (uint8_t rhport) -{ - // skip if already initialized - if ( tud_inited() ) return true; +bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + if (tud_inited()) { + return true; // skip if already initialized + } + TU_ASSERT(rh_init); - TU_LOG(USBD_DBG, "USBD init on controller %u\r\n", rhport); - TU_LOG_INT(USBD_DBG, sizeof(usbd_device_t)); + TU_LOG_USBD("USBD init on controller %u, speed = %s\r\n", rhport, + rh_init->speed == TUSB_SPEED_HIGH ? "High" : "Full"); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(usbd_device_t)); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(dcd_event_t)); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_fifo_t)); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_edpt_stream_t)); tu_varclr(&_usbd_dev); + _usbd_queued_setup = 0; -#if CFG_TUSB_OS != OPT_OS_NONE +#if OSAL_MUTEX_REQUIRED // Init device mutex _usbd_mutex = osal_mutex_create(&_ubsd_mutexdef); TU_ASSERT(_usbd_mutex); @@ -400,54 +486,83 @@ bool tud_init (uint8_t rhport) TU_ASSERT(_usbd_q); // Get application driver if available - if ( usbd_app_driver_get_cb ) - { + if (usbd_app_driver_get_cb) { _app_driver = usbd_app_driver_get_cb(&_app_driver_count); } // Init class drivers - for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) - { - usbd_class_driver_t const * driver = get_driver(i); - TU_ASSERT(driver); - TU_LOG(USBD_DBG, "%s init\r\n", driver->name); + for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { + usbd_class_driver_t const* driver = get_driver(i); + TU_ASSERT(driver && driver->init); + TU_LOG_USBD("%s init\r\n", driver->name); driver->init(); } _usbd_rhport = rhport; // Init device controller driver - dcd_init(rhport); + TU_ASSERT(dcd_init(rhport, rh_init)); dcd_int_enable(rhport); return true; } -static void configuration_reset(uint8_t rhport) -{ - for ( uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++ ) - { - usbd_class_driver_t const * driver = get_driver(i); - TU_ASSERT(driver, ); +bool tud_deinit(uint8_t rhport) { + if (!tud_inited()) { + return true; // skip if not initialized + } + + TU_LOG_USBD("USBD deinit on controller %u\r\n", rhport); + + // Deinit device controller driver + dcd_int_disable(rhport); + dcd_disconnect(rhport); + dcd_deinit(rhport); + + // Deinit class drivers + for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { + usbd_class_driver_t const* driver = get_driver(i); + if(driver && driver->deinit) { + TU_LOG_USBD("%s deinit\r\n", driver->name); + driver->deinit(); + } + } + + // Deinit device queue & task + osal_queue_delete(_usbd_q); + _usbd_q = NULL; + +#if OSAL_MUTEX_REQUIRED + // TODO make sure there is no task waiting on this mutex + osal_mutex_delete(_usbd_mutex); + _usbd_mutex = NULL; +#endif + + _usbd_rhport = RHPORT_INVALID; + + return true; +} + +static void configuration_reset(uint8_t rhport) { + for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { + usbd_class_driver_t const* driver = get_driver(i); + TU_ASSERT(driver,); driver->reset(rhport); } tu_varclr(&_usbd_dev); memset(_usbd_dev.itf2drv, DRVID_INVALID, sizeof(_usbd_dev.itf2drv)); // invalid mapping - memset(_usbd_dev.ep2drv , DRVID_INVALID, sizeof(_usbd_dev.ep2drv )); // invalid mapping + memset(_usbd_dev.ep2drv, DRVID_INVALID, sizeof(_usbd_dev.ep2drv)); // invalid mapping } -static void usbd_reset(uint8_t rhport) -{ +static void usbd_reset(uint8_t rhport) { configuration_reset(rhport); usbd_control_reset(); } -bool tud_task_event_ready(void) -{ +bool tud_task_event_ready(void) { // Skip if stack is not initialized - if ( !tusb_inited() ) return false; - + if (!tud_inited()) return false; return !osal_queue_empty(_usbd_q); } @@ -455,139 +570,133 @@ bool tud_task_event_ready(void) * This top level thread manages all device controller event and delegates events to class-specific drivers. * This should be called periodically within the mainloop or rtos thread. * - @code - int main(void) - { + int main(void) { application_init(); - tusb_init(); + tusb_init(0, TUSB_ROLE_DEVICE); - while(1) // the mainloop - { + while(1) { // the mainloop application_code(); tud_task(); // tinyusb device task } } - @endcode */ -void tud_task_ext(uint32_t timeout_ms, bool in_isr) -{ +void tud_task_ext(uint32_t timeout_ms, bool in_isr) { (void) in_isr; // not implemented yet // Skip if stack is not initialized - if ( !tusb_inited() ) return; + if (!tud_inited()) return; // Loop until there is no more events in the queue - while (1) - { + while (1) { dcd_event_t event; - if ( !osal_queue_receive(_usbd_q, &event, timeout_ms) ) return; + if (!osal_queue_receive(_usbd_q, &event, timeout_ms)) return; -#if CFG_TUSB_DEBUG >= 2 - if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG(USBD_DBG, "\r\n"); // extra line for setup - TU_LOG(USBD_DBG, "USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED"); +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL + if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG_USBD("\r\n"); // extra line for setup + TU_LOG_USBD("USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED"); #endif - switch ( event.event_id ) - { + switch (event.event_id) { case DCD_EVENT_BUS_RESET: - TU_LOG(USBD_DBG, ": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]); + TU_LOG_USBD(": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]); usbd_reset(event.rhport); _usbd_dev.speed = event.bus_reset.speed; - break; + break; case DCD_EVENT_UNPLUGGED: - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD("\r\n"); usbd_reset(event.rhport); - - // invoke callback - if (tud_umount_cb) tud_umount_cb(); - break; + tud_umount_cb(); + break; case DCD_EVENT_SETUP_RECEIVED: - TU_LOG_VAR(USBD_DBG, &event.setup_received); - TU_LOG(USBD_DBG, "\r\n"); + TU_ASSERT(_usbd_queued_setup > 0,); + _usbd_queued_setup--; + TU_LOG_BUF(CFG_TUD_LOG_LEVEL, &event.setup_received, 8); + if (_usbd_queued_setup) { + TU_LOG_USBD(" Skipped since there is other SETUP in queue\r\n"); + break; + } // Mark as connected after receiving 1st setup packet. // But it is easier to set it every time instead of wasting time to check then set _usbd_dev.connected = 1; // mark both in & out control as free - _usbd_dev.ep_status[0][TUSB_DIR_OUT].busy = false; + _usbd_dev.ep_status[0][TUSB_DIR_OUT].busy = 0; _usbd_dev.ep_status[0][TUSB_DIR_OUT].claimed = 0; - _usbd_dev.ep_status[0][TUSB_DIR_IN ].busy = false; - _usbd_dev.ep_status[0][TUSB_DIR_IN ].claimed = 0; + _usbd_dev.ep_status[0][TUSB_DIR_IN].busy = 0; + _usbd_dev.ep_status[0][TUSB_DIR_IN].claimed = 0; // Process control request - if ( !process_control_request(event.rhport, &event.setup_received) ) - { - TU_LOG(USBD_DBG, " Stall EP0\r\n"); + if (!process_control_request(event.rhport, &event.setup_received)) { + TU_LOG_USBD(" Stall EP0\r\n"); // Failed -> stall both control endpoint IN and OUT dcd_edpt_stall(event.rhport, 0); dcd_edpt_stall(event.rhport, 0 | TUSB_DIR_IN_MASK); } - break; + break; - case DCD_EVENT_XFER_COMPLETE: - { + case DCD_EVENT_XFER_COMPLETE: { // Invoke the class callback associated with the endpoint address uint8_t const ep_addr = event.xfer_complete.ep_addr; - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const ep_dir = tu_edpt_dir(ep_addr); + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const ep_dir = tu_edpt_dir(ep_addr); - TU_LOG(USBD_DBG, "on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len); + TU_LOG_USBD("on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len); - _usbd_dev.ep_status[epnum][ep_dir].busy = false; + _usbd_dev.ep_status[epnum][ep_dir].busy = 0; _usbd_dev.ep_status[epnum][ep_dir].claimed = 0; - if ( 0 == epnum ) - { - usbd_control_xfer_cb(event.rhport, ep_addr, (xfer_result_t)event.xfer_complete.result, event.xfer_complete.len); - } - else - { - usbd_class_driver_t const * driver = get_driver( _usbd_dev.ep2drv[epnum][ep_dir] ); - TU_ASSERT(driver, ); + if (0 == epnum) { + usbd_control_xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, + event.xfer_complete.len); + } else { + usbd_class_driver_t const* driver = get_driver(_usbd_dev.ep2drv[epnum][ep_dir]); + TU_ASSERT(driver,); - TU_LOG(USBD_DBG, " %s xfer callback\r\n", driver->name); - driver->xfer_cb(event.rhport, ep_addr, (xfer_result_t)event.xfer_complete.result, event.xfer_complete.len); + TU_LOG_USBD(" %s xfer callback\r\n", driver->name); + driver->xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); } + break; } - break; case DCD_EVENT_SUSPEND: // NOTE: When plugging/unplugging device, the D+/D- state are unstable and // can accidentally meet the SUSPEND condition ( Bus Idle for 3ms ), which result in a series of event // e.g suspend -> resume -> unplug/plug. Skip suspend/resume if not connected - if ( _usbd_dev.connected ) - { - TU_LOG(USBD_DBG, ": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en); - if (tud_suspend_cb) tud_suspend_cb(_usbd_dev.remote_wakeup_en); - }else - { - TU_LOG(USBD_DBG, " Skipped\r\n"); + if (_usbd_dev.connected) { + TU_LOG_USBD(": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en); + tud_suspend_cb(_usbd_dev.remote_wakeup_en); + } else { + TU_LOG_USBD(" Skipped\r\n"); } - break; + break; case DCD_EVENT_RESUME: - if ( _usbd_dev.connected ) - { - TU_LOG(USBD_DBG, "\r\n"); - if (tud_resume_cb) tud_resume_cb(); - }else - { - TU_LOG(USBD_DBG, " Skipped\r\n"); + if (_usbd_dev.connected) { + TU_LOG_USBD("\r\n"); + tud_resume_cb(); + } else { + TU_LOG_USBD(" Skipped\r\n"); } - break; + break; case USBD_EVENT_FUNC_CALL: - TU_LOG(USBD_DBG, "\r\n"); - if ( event.func_call.func ) event.func_call.func(event.func_call.param); - break; + TU_LOG_USBD("\r\n"); + if (event.func_call.func) event.func_call.func(event.func_call.param); + break; case DCD_EVENT_SOF: + if (tu_bit_test(_usbd_dev.sof_consumer, SOF_CONSUMER_USER)) { + TU_LOG_USBD("\r\n"); + tud_sof_cb(event.sof.frame_count); + } + break; + default: TU_BREAKPOINT(); - break; + break; } #if CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO @@ -602,44 +711,35 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) //--------------------------------------------------------------------+ // Helper to invoke class driver control request handler -static bool invoke_class_control(uint8_t rhport, usbd_class_driver_t const * driver, tusb_control_request_t const * request) -{ +static bool invoke_class_control(uint8_t rhport, usbd_class_driver_t const * driver, tusb_control_request_t const * request) { usbd_control_set_complete_callback(driver->control_xfer_cb); - TU_LOG(USBD_DBG, " %s control request\r\n", driver->name); + TU_LOG_USBD(" %s control request\r\n", driver->name); return driver->control_xfer_cb(rhport, CONTROL_STAGE_SETUP, request); } // This handles the actual request and its response. -// return false will cause its caller to stall control endpoint -static bool process_control_request(uint8_t rhport, tusb_control_request_t const * p_request) -{ +// Returns false if unable to complete the request, causing caller to stall control endpoints. +static bool process_control_request(uint8_t rhport, tusb_control_request_t const * p_request) { usbd_control_set_complete_callback(NULL); - TU_ASSERT(p_request->bmRequestType_bit.type < TUSB_REQ_TYPE_INVALID); // Vendor request - if ( p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_VENDOR ) - { - TU_VERIFY(tud_vendor_control_xfer_cb); - + if ( p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_VENDOR ) { usbd_control_set_complete_callback(tud_vendor_control_xfer_cb); return tud_vendor_control_xfer_cb(rhport, CONTROL_STAGE_SETUP, p_request); } -#if CFG_TUSB_DEBUG >= 2 - if (TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type && p_request->bRequest <= TUSB_REQ_SYNCH_FRAME) - { - TU_LOG(USBD_DBG, " %s", tu_str_std_request[p_request->bRequest]); - if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG(USBD_DBG, "\r\n"); +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL + if (TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type && p_request->bRequest <= TUSB_REQ_SYNCH_FRAME) { + TU_LOG_USBD(" %s", tu_str_std_request[p_request->bRequest]); + if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG_USBD("\r\n"); } #endif - switch ( p_request->bmRequestType_bit.recipient ) - { + switch ( p_request->bmRequestType_bit.recipient ) { //------------- Device Requests e.g in enumeration -------------// case TUSB_REQ_RCPT_DEVICE: - if ( TUSB_REQ_TYPE_CLASS == p_request->bmRequestType_bit.type ) - { + if ( TUSB_REQ_TYPE_CLASS == p_request->bmRequestType_bit.type ) { uint8_t const itf = tu_u16_low(p_request->wIndex); TU_VERIFY(itf < TU_ARRAY_SIZE(_usbd_dev.itf2drv)); @@ -650,15 +750,13 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const return invoke_class_control(rhport, driver, p_request); } - if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) - { - // Non standard request is not supported + if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) { + // Non-standard request is not supported TU_BREAKPOINT(); return false; } - switch ( p_request->bRequest ) - { + switch ( p_request->bRequest ) { case TUSB_REQ_SET_ADDRESS: // Depending on mcu, status phase could be sent either before or after changing device address, // or even require stack to not response with status at all @@ -669,24 +767,23 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const _usbd_dev.addressed = 1; break; - case TUSB_REQ_GET_CONFIGURATION: - { + case TUSB_REQ_GET_CONFIGURATION: { uint8_t cfg_num = _usbd_dev.cfg_num; tud_control_xfer(rhport, p_request, &cfg_num, 1); } break; - case TUSB_REQ_SET_CONFIGURATION: - { + case TUSB_REQ_SET_CONFIGURATION: { uint8_t const cfg_num = (uint8_t) p_request->wValue; // Only process if new configure is different - if (_usbd_dev.cfg_num != cfg_num) - { - if ( _usbd_dev.cfg_num ) - { + if (_usbd_dev.cfg_num != cfg_num) { + if ( _usbd_dev.cfg_num ) { // already configured: need to clear all endpoints and driver first - TU_LOG(USBD_DBG, " Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num); + TU_LOG_USBD(" Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num); + + // disable SOF + dcd_sof_enable(rhport, false); // close all non-control endpoints, cancel all pending transfers if any dcd_edpt_close_all(rhport); @@ -698,11 +795,23 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const _usbd_dev.speed = speed; // restore speed } - // switch to new configuration if not zero - if ( cfg_num ) TU_ASSERT( process_set_config(rhport, cfg_num) ); + _usbd_dev.cfg_num = cfg_num; + + // Handle the new configuration and execute the corresponding callback + if ( cfg_num ) { + // switch to new configuration if not zero + if (!process_set_config(rhport, cfg_num)) { + TU_MESS_FAILED(); + TU_BREAKPOINT(); + _usbd_dev.cfg_num = 0; + return false; + } + tud_mount_cb(); + } else { + tud_umount_cb(); + } } - _usbd_dev.cfg_num = cfg_num; tud_control_status(rhport, p_request); } break; @@ -712,36 +821,52 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const break; case TUSB_REQ_SET_FEATURE: - // Only support remote wakeup for device feature - TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); + switch(p_request->wValue) { + case TUSB_REQ_FEATURE_REMOTE_WAKEUP: + TU_LOG_USBD(" Enable Remote Wakeup\r\n"); + // Host may enable remote wake up before suspending especially HID device + _usbd_dev.remote_wakeup_en = true; + tud_control_status(rhport, p_request); + break; - TU_LOG(USBD_DBG, " Enable Remote Wakeup\r\n"); + #if CFG_TUD_TEST_MODE + case TUSB_REQ_FEATURE_TEST_MODE: { + // Only handle the test mode if supported and valid + TU_VERIFY(0 == tu_u16_low(p_request->wIndex)); - // Host may enable remote wake up before suspending especially HID device - _usbd_dev.remote_wakeup_en = true; - tud_control_status(rhport, p_request); + uint8_t const selector = tu_u16_high(p_request->wIndex); + TU_VERIFY(TUSB_FEATURE_TEST_J <= selector && selector <= TUSB_FEATURE_TEST_FORCE_ENABLE); + + usbd_control_set_complete_callback(process_test_mode_cb); + tud_control_status(rhport, p_request); + break; + } + #endif /* CFG_TUD_TEST_MODE */ + + // Stall unsupported feature selector + default: return false; + } break; case TUSB_REQ_CLEAR_FEATURE: // Only support remote wakeup for device feature TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); - TU_LOG(USBD_DBG, " Disable Remote Wakeup\r\n"); + TU_LOG_USBD(" Disable Remote Wakeup\r\n"); // Host may disable remote wake up after resuming _usbd_dev.remote_wakeup_en = false; tud_control_status(rhport, p_request); break; - case TUSB_REQ_GET_STATUS: - { + case TUSB_REQ_GET_STATUS: { // Device status bit mask // - Bit 0: Self Powered // - Bit 1: Remote Wakeup enabled uint16_t status = (uint16_t) ((_usbd_dev.self_powered ? 1u : 0u) | (_usbd_dev.remote_wakeup_en ? 2u : 0u)); tud_control_xfer(rhport, p_request, &status, 2); + break; } - break; // Unknown/Unsupported request default: TU_BREAKPOINT(); return false; @@ -749,8 +874,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const break; //------------- Class/Interface Specific Request -------------// - case TUSB_REQ_RCPT_INTERFACE: - { + case TUSB_REQ_RCPT_INTERFACE: { uint8_t const itf = tu_u16_low(p_request->wIndex); TU_VERIFY(itf < TU_ARRAY_SIZE(_usbd_dev.itf2drv)); @@ -759,25 +883,21 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // all requests to Interface (STD or Class) is forwarded to class driver. // notable requests are: GET HID REPORT DESCRIPTOR, SET_INTERFACE, GET_INTERFACE - if ( !invoke_class_control(rhport, driver, p_request) ) - { + if ( !invoke_class_control(rhport, driver, p_request) ) { // For GET_INTERFACE and SET_INTERFACE, it is mandatory to respond even if the class // driver doesn't use alternate settings or implement this TU_VERIFY(TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type); - switch(p_request->bRequest) - { + switch(p_request->bRequest) { case TUSB_REQ_GET_INTERFACE: case TUSB_REQ_SET_INTERFACE: // Clear complete callback if driver set since it can also stall the request. usbd_control_set_complete_callback(NULL); - if (TUSB_REQ_GET_INTERFACE == p_request->bRequest) - { + if (TUSB_REQ_GET_INTERFACE == p_request->bRequest) { uint8_t alternate = 0; tud_control_xfer(rhport, p_request, &alternate, 1); - }else - { + }else { tud_control_status(rhport, p_request); } break; @@ -785,54 +905,42 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const default: return false; } } + break; } - break; //------------- Endpoint Request -------------// - case TUSB_REQ_RCPT_ENDPOINT: - { + case TUSB_REQ_RCPT_ENDPOINT: { uint8_t const ep_addr = tu_u16_low(p_request->wIndex); uint8_t const ep_num = tu_edpt_number(ep_addr); uint8_t const ep_dir = tu_edpt_dir(ep_addr); TU_ASSERT(ep_num < TU_ARRAY_SIZE(_usbd_dev.ep2drv) ); - usbd_class_driver_t const * driver = get_driver(_usbd_dev.ep2drv[ep_num][ep_dir]); - if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) - { + if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) { // Forward class request to its driver TU_VERIFY(driver); return invoke_class_control(rhport, driver, p_request); - } - else - { + } else { // Handle STD request to endpoint - switch ( p_request->bRequest ) - { - case TUSB_REQ_GET_STATUS: - { + switch ( p_request->bRequest ) { + case TUSB_REQ_GET_STATUS: { uint16_t status = usbd_edpt_stalled(rhport, ep_addr) ? 0x0001 : 0x0000; tud_control_xfer(rhport, p_request, &status, 2); } break; case TUSB_REQ_CLEAR_FEATURE: - case TUSB_REQ_SET_FEATURE: - { - if ( TUSB_REQ_FEATURE_EDPT_HALT == p_request->wValue ) - { - if ( TUSB_REQ_CLEAR_FEATURE == p_request->bRequest ) - { + case TUSB_REQ_SET_FEATURE: { + if ( TUSB_REQ_FEATURE_EDPT_HALT == p_request->wValue ) { + if ( TUSB_REQ_CLEAR_FEATURE == p_request->bRequest ) { usbd_edpt_clear_stall(rhport, ep_addr); - }else - { + }else { usbd_edpt_stall(rhport, ep_addr); } } - if (driver) - { + if (driver) { // Some classes such as USBTMC needs to clear/re-init its buffer when receiving CLEAR_FEATURE request // We will also forward std request targeted endpoint to class drivers as well @@ -848,14 +956,18 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const break; // Unknown/Unsupported request - default: TU_BREAKPOINT(); return false; + default: + TU_BREAKPOINT(); + return false; } } } break; // Unknown recipient - default: TU_BREAKPOINT(); return false; + default: + TU_BREAKPOINT(); + return false; } return true; @@ -909,7 +1021,7 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) if ( (sizeof(tusb_desc_interface_t) <= drv_len) && (drv_len <= remaining_len) ) { // Open successfully - TU_LOG(USBD_DBG, " %s opened\r\n", driver->name); + TU_LOG_USBD(" %s opened\r\n", driver->name); // Some drivers use 2 or more interfaces but may not have IAD e.g MIDI (always) or // BTH (even CDC) with class in device descriptor (single interface) @@ -960,9 +1072,6 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) TU_ASSERT(drv_id < TOTAL_DRIVER_COUNT); } - // invoke callback - if (tud_mount_cb) tud_mount_cb(); - return true; } @@ -974,39 +1083,34 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const switch(desc_type) { - case TUSB_DESC_DEVICE: - { - TU_LOG(USBD_DBG, " Device\r\n"); + case TUSB_DESC_DEVICE: { + TU_LOG_USBD(" Device\r\n"); void* desc_device = (void*) (uintptr_t) tud_descriptor_device_cb(); + TU_ASSERT(desc_device); // Only response with exactly 1 Packet if: not addressed and host requested more data than device descriptor has. // This only happens with the very first get device descriptor and EP0 size = 8 or 16. if ((CFG_TUD_ENDPOINT0_SIZE < sizeof(tusb_desc_device_t)) && !_usbd_dev.addressed && - ((tusb_control_request_t const*) p_request)->wLength > sizeof(tusb_desc_device_t)) - { + ((tusb_control_request_t const*) p_request)->wLength > sizeof(tusb_desc_device_t)) { // Hack here: we modify the request length to prevent usbd_control response with zlp // since we are responding with 1 packet & less data than wLength. tusb_control_request_t mod_request = *p_request; mod_request.wLength = CFG_TUD_ENDPOINT0_SIZE; return tud_control_xfer(rhport, &mod_request, desc_device, CFG_TUD_ENDPOINT0_SIZE); - }else - { + }else { return tud_control_xfer(rhport, p_request, desc_device, sizeof(tusb_desc_device_t)); } } // break; // unreachable - case TUSB_DESC_BOS: - { - TU_LOG(USBD_DBG, " BOS\r\n"); + case TUSB_DESC_BOS: { + TU_LOG_USBD(" BOS\r\n"); // requested by host if USB > 2.0 ( i.e 2.1 or 3.x ) - if (!tud_descriptor_bos_cb) return false; - uintptr_t desc_bos = (uintptr_t) tud_descriptor_bos_cb(); - TU_ASSERT(desc_bos); + TU_VERIFY(desc_bos); // Use offsetof to avoid pointer to the odd/misaligned address uint16_t const total_len = tu_le16toh( tu_unaligned_read16((const void*) (desc_bos + offsetof(tusb_desc_bos_t, wTotalLength))) ); @@ -1016,24 +1120,20 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const // break; // unreachable case TUSB_DESC_CONFIGURATION: - case TUSB_DESC_OTHER_SPEED_CONFIG: - { + case TUSB_DESC_OTHER_SPEED_CONFIG: { uintptr_t desc_config; - if ( desc_type == TUSB_DESC_CONFIGURATION ) - { - TU_LOG(USBD_DBG, " Configuration[%u]\r\n", desc_index); + if ( desc_type == TUSB_DESC_CONFIGURATION ) { + TU_LOG_USBD(" Configuration[%u]\r\n", desc_index); desc_config = (uintptr_t) tud_descriptor_configuration_cb(desc_index); - }else - { + TU_ASSERT(desc_config); + }else { // Host only request this after getting Device Qualifier descriptor - TU_LOG(USBD_DBG, " Other Speed Configuration\r\n"); - TU_VERIFY( tud_descriptor_other_speed_configuration_cb ); + TU_LOG_USBD(" Other Speed Configuration\r\n"); desc_config = (uintptr_t) tud_descriptor_other_speed_configuration_cb(desc_index); + TU_VERIFY(desc_config); } - TU_ASSERT(desc_config); - // Use offsetof to avoid pointer to the odd/misaligned address uint16_t const total_len = tu_le16toh( tu_unaligned_read16((const void*) (desc_config + offsetof(tusb_desc_configuration_t, wTotalLength))) ); @@ -1043,7 +1143,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const case TUSB_DESC_STRING: { - TU_LOG(USBD_DBG, " String[%u]\r\n", desc_index); + TU_LOG_USBD(" String[%u]\r\n", desc_index); // String Descriptor always uses the desc set from user uint8_t const* desc_str = (uint8_t const*) tud_descriptor_string_cb(desc_index, tu_le16toh(p_request->wIndex)); @@ -1054,16 +1154,10 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } // break; // unreachable - case TUSB_DESC_DEVICE_QUALIFIER: - { - TU_LOG(USBD_DBG, " Device Qualifier\r\n"); - - TU_VERIFY( tud_descriptor_device_qualifier_cb ); - + case TUSB_DESC_DEVICE_QUALIFIER: { + TU_LOG_USBD(" Device Qualifier\r\n"); uint8_t const* desc_qualifier = tud_descriptor_device_qualifier_cb(); TU_VERIFY(desc_qualifier); - - // first byte of descriptor is its size return tud_control_xfer(rhport, p_request, (void*) (uintptr_t) desc_qualifier, tu_desc_len(desc_qualifier)); } // break; // unreachable @@ -1075,66 +1169,72 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const //--------------------------------------------------------------------+ // DCD Event Handler //--------------------------------------------------------------------+ -TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const * event, bool in_isr) -{ - switch (event->event_id) - { +TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const* event, bool in_isr) { + bool send = false; + switch (event->event_id) { case DCD_EVENT_UNPLUGGED: - _usbd_dev.connected = 0; - _usbd_dev.addressed = 0; - _usbd_dev.cfg_num = 0; - _usbd_dev.suspended = 0; - osal_queue_send(_usbd_q, event, in_isr); - break; + _usbd_dev.connected = 0; + _usbd_dev.addressed = 0; + _usbd_dev.cfg_num = 0; + _usbd_dev.suspended = 0; + send = true; + break; case DCD_EVENT_SUSPEND: // NOTE: When plugging/unplugging device, the D+/D- state are unstable and // can accidentally meet the SUSPEND condition ( Bus Idle for 3ms ). // In addition, some MCUs such as SAMD or boards that haven no VBUS detection cannot distinguish // suspended vs disconnected. We will skip handling SUSPEND/RESUME event if not currently connected - if ( _usbd_dev.connected ) - { + if (_usbd_dev.connected) { _usbd_dev.suspended = 1; - osal_queue_send(_usbd_q, event, in_isr); + send = true; } - break; + break; case DCD_EVENT_RESUME: // skip event if not connected (especially required for SAMD) - if ( _usbd_dev.connected ) - { + if (_usbd_dev.connected) { _usbd_dev.suspended = 0; - osal_queue_send(_usbd_q, event, in_isr); + send = true; } - break; + break; case DCD_EVENT_SOF: // SOF driver handler in ISR context - for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) - { - usbd_class_driver_t const * driver = get_driver(i); - if (driver && driver->sof) - { + for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { + usbd_class_driver_t const* driver = get_driver(i); + if (driver && driver->sof) { driver->sof(event->rhport, event->sof.frame_count); } } // Some MCUs after running dcd_remote_wakeup() does not have way to detect the end of remote wakeup // which last 1-15 ms. DCD can use SOF as a clear indicator that bus is back to operational - if ( _usbd_dev.suspended ) - { + if (_usbd_dev.suspended) { _usbd_dev.suspended = 0; - dcd_event_t const event_resume = { .rhport = event->rhport, .event_id = DCD_EVENT_RESUME }; - osal_queue_send(_usbd_q, &event_resume, in_isr); + dcd_event_t const event_resume = {.rhport = event->rhport, .event_id = DCD_EVENT_RESUME}; + queue_event(&event_resume, in_isr); } - // skip osal queue for SOF in usbd task - break; + if (tu_bit_test(_usbd_dev.sof_consumer, SOF_CONSUMER_USER)) { + dcd_event_t const event_sof = {.rhport = event->rhport, .event_id = DCD_EVENT_SOF, .sof.frame_count = event->sof.frame_count}; + queue_event(&event_sof, in_isr); + } + break; + + case DCD_EVENT_SETUP_RECEIVED: + _usbd_queued_setup++; + send = true; + break; default: - osal_queue_send(_usbd_q, event, in_isr); - break; + send = true; + break; + } + + if (send) { + queue_event(event, in_isr); } } @@ -1178,26 +1278,22 @@ bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count } // Helper to defer an isr function -void usbd_defer_func(osal_task_func_t func, void* param, bool in_isr) -{ - dcd_event_t event = - { +void usbd_defer_func(osal_task_func_t func, void* param, bool in_isr) { + dcd_event_t event = { .rhport = 0, .event_id = USBD_EVENT_FUNC_CALL, }; - event.func_call.func = func; event.func_call.param = param; - dcd_event_handler(&event, in_isr); + queue_event(&event, in_isr); } //--------------------------------------------------------------------+ // USBD Endpoint API //--------------------------------------------------------------------+ -bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) -{ +bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const* desc_ep) { rhport = _usbd_rhport; TU_ASSERT(tu_edpt_number(desc_ep->bEndpointAddress) < CFG_TUD_ENDPPOINT_MAX); @@ -1206,67 +1302,59 @@ bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) return dcd_edpt_open(rhport, desc_ep); } -bool usbd_edpt_claim(uint8_t rhport, uint8_t ep_addr) -{ +bool usbd_edpt_claim(uint8_t rhport, uint8_t ep_addr) { (void) rhport; // TODO add this check later, also make sure we don't starve an out endpoint while suspending // TU_VERIFY(tud_ready()); - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); tu_edpt_state_t* ep_state = &_usbd_dev.ep_status[epnum][dir]; -#if TUSB_OPT_MUTEX return tu_edpt_claim(ep_state, _usbd_mutex); -#else - return tu_edpt_claim(ep_state, NULL); -#endif } -bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr) -{ +bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr) { (void) rhport; - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); tu_edpt_state_t* ep_state = &_usbd_dev.ep_status[epnum][dir]; -#if TUSB_OPT_MUTEX return tu_edpt_release(ep_state, _usbd_mutex); -#else - return tu_edpt_release(ep_state, NULL); -#endif } -bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ +bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { rhport = _usbd_rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); // TODO skip ready() check for now since enumeration also use this API // TU_VERIFY(tud_ready()); - TU_LOG(USBD_DBG, " Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes); + TU_LOG_USBD(" Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes); +#if CFG_TUD_LOG_LEVEL >= 3 + if(dir == TUSB_DIR_IN) { + TU_LOG_MEM(CFG_TUD_LOG_LEVEL, buffer, total_bytes, 2); + } +#endif // Attempt to transfer on a busy endpoint, sound like an race condition ! TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0); // Set busy first since the actual transfer can be complete before dcd_edpt_xfer() // could return and USBD task can preempt and clear the busy - _usbd_dev.ep_status[epnum][dir].busy = true; + _usbd_dev.ep_status[epnum][dir].busy = 1; - if ( dcd_edpt_xfer(rhport, ep_addr, buffer, total_bytes) ) - { + if (dcd_edpt_xfer(rhport, ep_addr, buffer, total_bytes)) { return true; - }else - { + } else { // DCD error, mark endpoint as ready to allow next transfer - _usbd_dev.ep_status[epnum][dir].busy = false; + _usbd_dev.ep_status[epnum][dir].busy = 0; _usbd_dev.ep_status[epnum][dir].claimed = 0; - TU_LOG(USBD_DBG, "FAILED\r\n"); + TU_LOG_USBD("FAILED\r\n"); TU_BREAKPOINT(); return false; } @@ -1276,122 +1364,150 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // bytes should be written and second to keep the return value free to give back a boolean // success message. If total_bytes is too big, the FIFO will copy only what is available // into the USB buffer! -bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) -{ +bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes) { rhport = _usbd_rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - TU_LOG(USBD_DBG, " Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes); + TU_LOG_USBD(" Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes); // Attempt to transfer on a busy endpoint, sound like an race condition ! TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0); // Set busy first since the actual transfer can be complete before dcd_edpt_xfer() could return // and usbd task can preempt and clear the busy - _usbd_dev.ep_status[epnum][dir].busy = true; + _usbd_dev.ep_status[epnum][dir].busy = 1; - if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes)) - { - TU_LOG(USBD_DBG, "OK\r\n"); + if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes)) { + TU_LOG_USBD("OK\r\n"); return true; - }else - { + } else { // DCD error, mark endpoint as ready to allow next transfer - _usbd_dev.ep_status[epnum][dir].busy = false; + _usbd_dev.ep_status[epnum][dir].busy = 0; _usbd_dev.ep_status[epnum][dir].claimed = 0; - TU_LOG(USBD_DBG, "failed\r\n"); + TU_LOG_USBD("failed\r\n"); TU_BREAKPOINT(); return false; } } -bool usbd_edpt_busy(uint8_t rhport, uint8_t ep_addr) -{ +bool usbd_edpt_busy(uint8_t rhport, uint8_t ep_addr) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); return _usbd_dev.ep_status[epnum][dir].busy; } -void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr) -{ +void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { rhport = _usbd_rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); // only stalled if currently cleared - if ( !_usbd_dev.ep_status[epnum][dir].stalled ) - { - TU_LOG(USBD_DBG, " Stall EP %02X\r\n", ep_addr); - dcd_edpt_stall(rhport, ep_addr); - _usbd_dev.ep_status[epnum][dir].stalled = true; - _usbd_dev.ep_status[epnum][dir].busy = true; - } + TU_LOG_USBD(" Stall EP %02X\r\n", ep_addr); + dcd_edpt_stall(rhport, ep_addr); + _usbd_dev.ep_status[epnum][dir].stalled = 1; + _usbd_dev.ep_status[epnum][dir].busy = 1; } -void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) -{ +void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { rhport = _usbd_rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); // only clear if currently stalled - if ( _usbd_dev.ep_status[epnum][dir].stalled ) - { - TU_LOG(USBD_DBG, " Clear Stall EP %02X\r\n", ep_addr); - dcd_edpt_clear_stall(rhport, ep_addr); - _usbd_dev.ep_status[epnum][dir].stalled = false; - _usbd_dev.ep_status[epnum][dir].busy = false; - } + TU_LOG_USBD(" Clear Stall EP %02X\r\n", ep_addr); + dcd_edpt_clear_stall(rhport, ep_addr); + _usbd_dev.ep_status[epnum][dir].stalled = 0; + _usbd_dev.ep_status[epnum][dir].busy = 0; } -bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr) -{ +bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); return _usbd_dev.ep_status[epnum][dir].stalled; } /** * usbd_edpt_close will disable an endpoint. - * * In progress transfers on this EP may be delivered after this call. - * */ -void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ +void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) { +#ifdef TUP_DCD_EDPT_ISO_ALLOC + (void) rhport; (void) ep_addr; + // ISO alloc/activate Should be used instead +#else rhport = _usbd_rhport; - TU_ASSERT(dcd_edpt_close, /**/); - TU_LOG(USBD_DBG, " CLOSING Endpoint: 0x%02X\r\n", ep_addr); + TU_LOG_USBD(" CLOSING Endpoint: 0x%02X\r\n", ep_addr); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); dcd_edpt_close(rhport, ep_addr); - _usbd_dev.ep_status[epnum][dir].stalled = false; - _usbd_dev.ep_status[epnum][dir].busy = false; - _usbd_dev.ep_status[epnum][dir].claimed = false; + _usbd_dev.ep_status[epnum][dir].stalled = 0; + _usbd_dev.ep_status[epnum][dir].busy = 0; + _usbd_dev.ep_status[epnum][dir].claimed = 0; +#endif return; } -void usbd_sof_enable(uint8_t rhport, bool en) -{ +void usbd_sof_enable(uint8_t rhport, sof_consumer_t consumer, bool en) { rhport = _usbd_rhport; - // TODO: Check needed if all drivers including the user sof_cb does not need an active SOF ISR any more. - // Only if all drivers switched off SOF calls the SOF interrupt may be disabled - dcd_sof_enable(rhport, en); + uint8_t consumer_old = _usbd_dev.sof_consumer; + // Keep track how many class instances need the SOF interrupt + if (en) { + _usbd_dev.sof_consumer |= (uint8_t)(1 << consumer); + } else { + _usbd_dev.sof_consumer &= (uint8_t)(~(1 << consumer)); + } + + // Test logically unequal + if(!_usbd_dev.sof_consumer != !consumer_old) { + dcd_sof_enable(rhport, _usbd_dev.sof_consumer); + } +} + +bool usbd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { +#ifdef TUP_DCD_EDPT_ISO_ALLOC + rhport = _usbd_rhport; + + TU_ASSERT(tu_edpt_number(ep_addr) < CFG_TUD_ENDPPOINT_MAX); + return dcd_edpt_iso_alloc(rhport, ep_addr, largest_packet_size); +#else + (void) rhport; (void) ep_addr; (void) largest_packet_size; + return false; +#endif +} + +bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const* desc_ep) { +#ifdef TUP_DCD_EDPT_ISO_ALLOC + rhport = _usbd_rhport; + + uint8_t const epnum = tu_edpt_number(desc_ep->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(desc_ep->bEndpointAddress); + + TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX); + TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed)); + + _usbd_dev.ep_status[epnum][dir].stalled = 0; + _usbd_dev.ep_status[epnum][dir].busy = 0; + _usbd_dev.ep_status[epnum][dir].claimed = 0; + return dcd_edpt_iso_activate(rhport, desc_ep); +#else + (void) rhport; (void) desc_ep; + return false; +#endif } #endif diff --git a/src/device/usbd.h b/src/device/usbd.h index 731c57aad..de6007fb3 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -37,8 +37,23 @@ extern "C" { // Application API //--------------------------------------------------------------------+ -// Init device stack -bool tud_init (uint8_t rhport); +// New API to replace tud_init() to init device stack on specific roothub port +bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); + +// Init device stack on roothub port +#if TUSB_VERSION_NUMBER > 2000 // 0.20.0 +TU_ATTR_DEPRECATED("Please use tusb_init(rhport, rh_init) instead") +#endif +TU_ATTR_ALWAYS_INLINE static inline bool tud_init (uint8_t rhport) { + const tusb_rhport_init_t rh_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL + }; + return tud_rhport_init(rhport, &rh_init); +} + +// Deinit device stack on roothub port +bool tud_deinit(uint8_t rhport); // Check if device stack is already initialized bool tud_inited(void); @@ -50,15 +65,14 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr); // Task function should be called in main/rtos loop TU_ATTR_ALWAYS_INLINE static inline -void tud_task (void) -{ +void tud_task (void) { tud_task_ext(UINT32_MAX, false); } // Check if there is pending events need processing by tud_task() bool tud_task_event_ready(void); -#ifndef _TUSB_DCD_H_ +#ifndef TUSB_DCD_H_ extern void dcd_int_handler(uint8_t rhport); #endif @@ -80,8 +94,7 @@ bool tud_suspended(void); // Check if device is ready to transfer TU_ATTR_ALWAYS_INLINE static inline -bool tud_ready(void) -{ +bool tud_ready(void) { return tud_mounted() && !tud_suspended(); } @@ -96,6 +109,9 @@ bool tud_disconnect(void); // Return false on unsupported MCUs bool tud_connect(void); +// Enable or disable the Start Of Frame callback support +void tud_sof_cb_enable(bool en); + // Carry out Data and Status stage of control transfer // - If len = 0, it is equivalent to sending status only // - If len > wLength : it will be truncated @@ -105,7 +121,7 @@ bool tud_control_xfer(uint8_t rhport, tusb_control_request_t const * request, vo bool tud_control_status(uint8_t rhport, tusb_control_request_t const * request); //--------------------------------------------------------------------+ -// Application Callbacks (WEAK is optional) +// Application Callbacks //--------------------------------------------------------------------+ // Invoked when received GET DEVICE DESCRIPTOR request @@ -122,34 +138,40 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid); // Invoked when received GET BOS DESCRIPTOR request // Application return pointer to descriptor -TU_ATTR_WEAK uint8_t const * tud_descriptor_bos_cb(void); +uint8_t const * tud_descriptor_bos_cb(void); // Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. // device_qualifier descriptor describes information about a high-speed capable device that would // change if the device were operating at the other speed. If not highspeed capable stall this request. -TU_ATTR_WEAK uint8_t const* tud_descriptor_device_qualifier_cb(void); +uint8_t const* tud_descriptor_device_qualifier_cb(void); // Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete // Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa -TU_ATTR_WEAK uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index); +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index); // Invoked when device is mounted (configured) -TU_ATTR_WEAK void tud_mount_cb(void); +void tud_mount_cb(void); // Invoked when device is unmounted -TU_ATTR_WEAK void tud_umount_cb(void); +void tud_umount_cb(void); // Invoked when usb bus is suspended // Within 7ms, device must draw an average of current less than 2.5 mA from bus -TU_ATTR_WEAK void tud_suspend_cb(bool remote_wakeup_en); +void tud_suspend_cb(bool remote_wakeup_en); // Invoked when usb bus is resumed -TU_ATTR_WEAK void tud_resume_cb(void); +void tud_resume_cb(void); + +// Invoked when there is a new usb event, which need to be processed by tud_task()/tud_task_ext() +void tud_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr); + +// Invoked when a new (micro) frame started +void tud_sof_cb(uint32_t frame_count); // Invoked when received control request with VENDOR TYPE -TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); //--------------------------------------------------------------------+ // Binary Device Object Store (BOS) Descriptor Templates @@ -217,8 +239,8 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb 5, TUSB_DESC_CS_INTERFACE, CDC_FUNC_DESC_HEADER, U16_TO_U8S_LE(0x0120),\ /* CDC Call */\ 5, TUSB_DESC_CS_INTERFACE, CDC_FUNC_DESC_CALL_MANAGEMENT, 0, (uint8_t)((_itfnum) + 1),\ - /* CDC ACM: support line request */\ - 4, TUSB_DESC_CS_INTERFACE, CDC_FUNC_DESC_ABSTRACT_CONTROL_MANAGEMENT, 2,\ + /* CDC ACM: support line request + send break */\ + 4, TUSB_DESC_CS_INTERFACE, CDC_FUNC_DESC_ABSTRACT_CONTROL_MANAGEMENT, 6,\ /* CDC Union */\ 5, TUSB_DESC_CS_INTERFACE, CDC_FUNC_DESC_UNION, _itfnum, (uint8_t)((_itfnum) + 1),\ /* Endpoint Notification */\ @@ -293,7 +315,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* MIDI Streaming (MS) Interface */\ 9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum) + 1), 0, 2, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_MIDI_STREAMING, AUDIO_FUNC_PROTOCOL_CODE_UNDEF, 0,\ /* MS Header */\ - 7, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_HEADER, U16_TO_U8S_LE(0x0100), U16_TO_U8S_LE(7 + (_numcables) * TUD_MIDI_DESC_JACK_LEN) + 7, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_HEADER, U16_TO_U8S_LE(0x0100), U16_TO_U8S_LE(7 + (_numcables) * TUD_MIDI_DESC_JACK_LEN + 2 * TUD_MIDI_DESC_EP_LEN(_numcables)) #define TUD_MIDI_JACKID_IN_EMB(_cablenum) \ (uint8_t)(((_cablenum) - 1) * 4 + 1) @@ -317,6 +339,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb 9, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_OUT_JACK, MIDI_JACK_EMBEDDED, TUD_MIDI_JACKID_OUT_EMB(_cablenum), 1, TUD_MIDI_JACKID_IN_EXT(_cablenum), 1, _stridx,\ /* MS Out Jack (External), connected to In Jack Embedded */\ 9, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_OUT_JACK, MIDI_JACK_EXTERNAL, TUD_MIDI_JACKID_OUT_EXT(_cablenum), 1, TUD_MIDI_JACKID_IN_EMB(_cablenum), 1, _stridx + #define TUD_MIDI_DESC_JACK(_cablenum) TUD_MIDI_DESC_JACK_DESC(_cablenum, 0) #define TUD_MIDI_DESC_EP_LEN(_numcables) (9 + 4 + (_numcables)) @@ -346,8 +369,8 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Standard Interface Association Descriptor (IAD) */ #define TUD_AUDIO_DESC_IAD_LEN 8 -#define TUD_AUDIO_DESC_IAD(_firstitfs, _nitfs, _stridx) \ - TUD_AUDIO_DESC_IAD_LEN, TUSB_DESC_INTERFACE_ASSOCIATION, _firstitfs, _nitfs, TUSB_CLASS_AUDIO, AUDIO_FUNCTION_SUBCLASS_UNDEFINED, AUDIO_FUNC_PROTOCOL_CODE_V2, _stridx +#define TUD_AUDIO_DESC_IAD(_firstitf, _nitfs, _stridx) \ + TUD_AUDIO_DESC_IAD_LEN, TUSB_DESC_INTERFACE_ASSOCIATION, _firstitf, _nitfs, TUSB_CLASS_AUDIO, AUDIO_FUNCTION_SUBCLASS_UNDEFINED, AUDIO_FUNC_PROTOCOL_CODE_V2, _stridx /* Standard AC Interface Descriptor(4.7.1) */ #define TUD_AUDIO_DESC_STD_AC_LEN 9 @@ -391,6 +414,11 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb // For more channels, add definitions here +/* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */ +#define TUD_AUDIO_DESC_STD_AC_INT_EP_LEN 7 +#define TUD_AUDIO_DESC_STD_AC_INT_EP(_ep, _interval) \ + TUD_AUDIO_DESC_STD_AC_INT_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(6), _interval + /* Standard AS Interface Descriptor(4.9.1) */ #define TUD_AUDIO_DESC_STD_AS_INT_LEN 9 #define TUD_AUDIO_DESC_STD_AS_INT(_itfnum, _altset, _nEPs, _stridx) \ @@ -418,8 +446,8 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */ #define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN 7 -#define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(_ep, _interval) \ - TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_NO_SYNC | TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(4), _interval +#define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(_ep, _epsize, _interval) \ + TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_NO_SYNC | (uint8_t)TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(_epsize), _interval // AUDIO simple descriptor (UAC2) for 1 microphone input // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal, 1 Clock Source @@ -442,7 +470,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb #define TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitfs*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ @@ -466,7 +494,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) @@ -491,7 +519,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb #define TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitfs*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ @@ -515,7 +543,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) @@ -537,9 +565,9 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN) -#define TUD_AUDIO_SPEAKER_MONO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epsize, _epfb) \ +#define TUD_AUDIO_SPEAKER_MONO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitfs*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ @@ -551,7 +579,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Output Terminal Descriptor(4.7.2.5) */\ TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ 0 * (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ 0 * (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ @@ -563,11 +591,11 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_interval*/ 1)\ + TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ 1) // Calculate wMaxPacketSize of Endpoints #define TUD_AUDIO_EP_SIZE(_maxFrequency, _nBytesPerSample, _nChannels) \ @@ -603,7 +631,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb /* optional interrupt endpoint */ \ // _int_pollingInterval : for LS/FS, expressed in frames (1ms each). 16 may be a good number? #define TUD_USBTMC_INT_DESCRIPTOR(_ep_interrupt, _ep_interrupt_size, _int_pollingInterval ) \ - 7, TUSB_DESC_ENDPOINT, _ep_interrupt, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_interrupt_size), 0x16 + 7, TUSB_DESC_ENDPOINT, _ep_interrupt, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_interrupt_size), _int_pollingInterval #define TUD_USBTMC_INT_DESCRIPTOR_LEN (7u) @@ -648,7 +676,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb #define TUD_DFU_DESC_LEN(_alt_count) (9 + (_alt_count) * 9) // Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size -// Note: Alternate count must be numberic or macro, string index is increased by one for each Alt interface +// Note: Alternate count must be numeric or macro, string index is increased by one for each Alt interface #define TUD_DFU_DESCRIPTOR(_itfnum, _alt_count, _stridx, _attr, _timeout, _xfer_size) \ TU_XSTRCAT(_TUD_DFU_ALT_,_alt_count)(_itfnum, 0, _stridx), \ /* Function */ \ @@ -772,10 +800,6 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb #define TUD_BT_PROTOCOL_PRIMARY_CONTROLLER 0x01 #define TUD_BT_PROTOCOL_AMP_CONTROLLER 0x02 -#ifndef CFG_TUD_BTH_ISO_ALT_COUNT -#define CFG_TUD_BTH_ISO_ALT_COUNT 0 -#endif - // Length of template descriptor: 38 bytes + number of ISO alternatives * 23 #define TUD_BTH_DESC_LEN (8 + 9 + 7 + 7 + 7 + (CFG_TUD_BTH_ISO_ALT_COUNT) * (9 + 7 + 7)) diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index 187547ae3..c9700fd9d 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -32,98 +32,90 @@ #include "tusb.h" #include "device/usbd_pvt.h" -#if CFG_TUSB_DEBUG >= 2 -extern void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); -#endif +//--------------------------------------------------------------------+ +// Callback weak stubs (called if application does not provide) +//--------------------------------------------------------------------+ +TU_ATTR_WEAK void dcd_edpt0_status_complete(uint8_t rhport, const tusb_control_request_t* request) { + (void) rhport; + (void) request; +} -enum -{ +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF +//--------------------------------------------------------------------+ + +enum { EDPT_CTRL_OUT = 0x00, - EDPT_CTRL_IN = 0x80 + EDPT_CTRL_IN = 0x80 }; -typedef struct -{ +typedef struct { tusb_control_request_t request; - uint8_t* buffer; uint16_t data_len; uint16_t total_xferred; - usbd_control_xfer_cb_t complete_cb; } usbd_control_xfer_t; static usbd_control_xfer_t _ctrl_xfer; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN -static uint8_t _usbd_ctrl_buf[/*CFG_TUD_ENDPOINT0_SIZE*/ 64]; +CFG_TUD_MEM_SECTION static struct { + TUD_EPBUF_DEF(buf, CFG_TUD_ENDPOINT0_SIZE); +} _ctrl_epbuf; //--------------------------------------------------------------------+ // Application API //--------------------------------------------------------------------+ // Queue ZLP status transaction -static inline bool _status_stage_xact(uint8_t rhport, tusb_control_request_t const * request) -{ +static inline bool status_stage_xact(uint8_t rhport, const tusb_control_request_t* request) { // Opposite to endpoint in Data Phase - uint8_t const ep_addr = request->bmRequestType_bit.direction ? EDPT_CTRL_OUT : EDPT_CTRL_IN; + const uint8_t ep_addr = request->bmRequestType_bit.direction ? EDPT_CTRL_OUT : EDPT_CTRL_IN; return usbd_edpt_xfer(rhport, ep_addr, NULL, 0); } // Status phase -bool tud_control_status(uint8_t rhport, tusb_control_request_t const * request) -{ - _ctrl_xfer.request = (*request); - _ctrl_xfer.buffer = NULL; +bool tud_control_status(uint8_t rhport, const tusb_control_request_t* request) { + _ctrl_xfer.request = (*request); + _ctrl_xfer.buffer = NULL; _ctrl_xfer.total_xferred = 0; - _ctrl_xfer.data_len = 0; + _ctrl_xfer.data_len = 0; - return _status_stage_xact(rhport, request); + return status_stage_xact(rhport, request); } // Queue a transaction in Data Stage // Each transaction has up to Endpoint0's max packet size. // This function can also transfer an zero-length packet -static bool _data_stage_xact(uint8_t rhport) -{ - uint16_t const xact_len = tu_min16(_ctrl_xfer.data_len - _ctrl_xfer.total_xferred, CFG_TUD_ENDPOINT0_SIZE); - +static bool data_stage_xact(uint8_t rhport) { + const uint16_t xact_len = tu_min16(_ctrl_xfer.data_len - _ctrl_xfer.total_xferred, CFG_TUD_ENDPOINT0_SIZE); uint8_t ep_addr = EDPT_CTRL_OUT; - if ( _ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN ) - { + if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN) { ep_addr = EDPT_CTRL_IN; - if ( xact_len ) memcpy(_usbd_ctrl_buf, _ctrl_xfer.buffer, xact_len); + if (xact_len) { + TU_VERIFY(0 == tu_memcpy_s(_ctrl_epbuf.buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len)); + } } - return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _usbd_ctrl_buf : NULL, xact_len); + return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _ctrl_epbuf.buf : NULL, xact_len); } // Transmit data to/from the control endpoint. // If the request's wLength is zero, a status packet is sent instead. -bool tud_control_xfer(uint8_t rhport, tusb_control_request_t const * request, void* buffer, uint16_t len) -{ - _ctrl_xfer.request = (*request); - _ctrl_xfer.buffer = (uint8_t*) buffer; +bool tud_control_xfer(uint8_t rhport, const tusb_control_request_t* request, void* buffer, uint16_t len) { + _ctrl_xfer.request = (*request); + _ctrl_xfer.buffer = (uint8_t*) buffer; _ctrl_xfer.total_xferred = 0U; - _ctrl_xfer.data_len = tu_min16(len, request->wLength); + _ctrl_xfer.data_len = tu_min16(len, request->wLength); - if (request->wLength > 0U) - { - if(_ctrl_xfer.data_len > 0U) - { + if (request->wLength > 0U) { + if (_ctrl_xfer.data_len > 0U) { TU_ASSERT(buffer); } - -// TU_LOG2(" Control total data length is %u bytes\r\n", _ctrl_xfer.data_len); - - // Data stage - TU_ASSERT( _data_stage_xact(rhport) ); - } - else - { - // Status stage - TU_ASSERT( _status_stage_xact(rhport, request) ); + TU_ASSERT(data_stage_xact(rhport)); + } else { + TU_ASSERT(status_stage_xact(rhport, request)); } return true; @@ -132,49 +124,42 @@ bool tud_control_xfer(uint8_t rhport, tusb_control_request_t const * request, vo //--------------------------------------------------------------------+ // USBD API //--------------------------------------------------------------------+ - void usbd_control_reset(void); -void usbd_control_set_request(tusb_control_request_t const *request); -void usbd_control_set_complete_callback( usbd_control_xfer_cb_t fp ); -bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes); +void usbd_control_set_request(const tusb_control_request_t* request); +void usbd_control_set_complete_callback(usbd_control_xfer_cb_t fp); +bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); -void usbd_control_reset(void) -{ +void usbd_control_reset(void) { tu_varclr(&_ctrl_xfer); } // Set complete callback -void usbd_control_set_complete_callback( usbd_control_xfer_cb_t fp ) -{ +void usbd_control_set_complete_callback(usbd_control_xfer_cb_t fp) { _ctrl_xfer.complete_cb = fp; } // for dcd_set_address where DCD is responsible for status response -void usbd_control_set_request(tusb_control_request_t const *request) -{ - _ctrl_xfer.request = (*request); - _ctrl_xfer.buffer = NULL; +void usbd_control_set_request(const tusb_control_request_t* request) { + _ctrl_xfer.request = (*request); + _ctrl_xfer.buffer = NULL; _ctrl_xfer.total_xferred = 0; - _ctrl_xfer.data_len = 0; + _ctrl_xfer.data_len = 0; } // callback when a transaction complete on // - DATA stage of control endpoint or // - Status stage -bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) -{ +bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) result; // Endpoint Address is opposite to direction bit, this is Status Stage complete event - if ( tu_edpt_dir(ep_addr) != _ctrl_xfer.request.bmRequestType_bit.direction ) - { + if (tu_edpt_dir(ep_addr) != _ctrl_xfer.request.bmRequestType_bit.direction) { TU_ASSERT(0 == xferred_bytes); // invoke optional dcd hook if available - if (dcd_edpt0_status_complete) dcd_edpt0_status_complete(rhport, &_ctrl_xfer.request); + dcd_edpt0_status_complete(rhport, &_ctrl_xfer.request); - if (_ctrl_xfer.complete_cb) - { + if (_ctrl_xfer.complete_cb) { // TODO refactor with usbd_driver_print_control_complete_name _ctrl_xfer.complete_cb(rhport, CONTROL_STAGE_ACK, &_ctrl_xfer.request); } @@ -182,11 +167,10 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result return true; } - if ( _ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_OUT ) - { + if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_OUT) { TU_VERIFY(_ctrl_xfer.buffer); - memcpy(_ctrl_xfer.buffer, _usbd_ctrl_buf, xferred_bytes); - TU_LOG_MEM(2, _usbd_ctrl_buf, xferred_bytes, 2); + memcpy(_ctrl_xfer.buffer, _ctrl_epbuf.buf, xferred_bytes); + TU_LOG_MEM(CFG_TUD_LOG_LEVEL, _ctrl_xfer.buffer, xferred_bytes, 2); } _ctrl_xfer.total_xferred += (uint16_t) xferred_bytes; @@ -194,37 +178,31 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result // Data Stage is complete when all request's length are transferred or // a short packet is sent including zero-length packet. - if ( (_ctrl_xfer.request.wLength == _ctrl_xfer.total_xferred) || (xferred_bytes < CFG_TUD_ENDPOINT0_SIZE) ) - { + if ((_ctrl_xfer.request.wLength == _ctrl_xfer.total_xferred) || + (xferred_bytes < CFG_TUD_ENDPOINT0_SIZE)) { // DATA stage is complete bool is_ok = true; // invoke complete callback if set // callback can still stall control in status phase e.g out data does not make sense - if ( _ctrl_xfer.complete_cb ) - { - #if CFG_TUSB_DEBUG >= 2 + if (_ctrl_xfer.complete_cb) { + #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL usbd_driver_print_control_complete_name(_ctrl_xfer.complete_cb); #endif is_ok = _ctrl_xfer.complete_cb(rhport, CONTROL_STAGE_DATA, &_ctrl_xfer.request); } - if ( is_ok ) - { - // Send status - TU_ASSERT( _status_stage_xact(rhport, &_ctrl_xfer.request) ); - }else - { + if (is_ok) { + TU_ASSERT(status_stage_xact(rhport, &_ctrl_xfer.request)); + } else { // Stall both IN and OUT control endpoint dcd_edpt_stall(rhport, EDPT_CTRL_OUT); dcd_edpt_stall(rhport, EDPT_CTRL_IN); } - } - else - { + } else { // More data to transfer - TU_ASSERT( _data_stage_xact(rhport) ); + TU_ASSERT(data_stage_xact(rhport)); } return true; diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 6fad46db3..190d6fd7f 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -23,27 +23,36 @@ * * This file is part of the TinyUSB stack. */ -#ifndef USBD_PVT_H_ -#define USBD_PVT_H_ +#ifndef TUSB_USBD_PVT_H_ +#define TUSB_USBD_PVT_H_ #include "osal/osal.h" #include "common/tusb_fifo.h" +#include "common/tusb_private.h" #ifdef __cplusplus extern "C" { #endif +#define TU_LOG_USBD(...) TU_LOG(CFG_TUD_LOG_LEVEL, __VA_ARGS__) + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +typedef enum { + SOF_CONSUMER_USER = 0, + SOF_CONSUMER_AUDIO, +} sof_consumer_t; + //--------------------------------------------------------------------+ // Class Driver API //--------------------------------------------------------------------+ -typedef struct -{ - #if CFG_TUSB_DEBUG >= 2 +typedef struct { char const* name; - #endif - void (* init ) (void); + bool (* deinit ) (void); void (* reset ) (uint8_t rhport); uint16_t (* open ) (uint8_t rhport, tusb_desc_interface_t const * desc_intf, uint16_t max_len); bool (* control_xfer_cb ) (uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); @@ -52,7 +61,7 @@ typedef struct } usbd_class_driver_t; // Invoked when initializing device stack to get additional class drivers. -// Can optionally implemented by application to extend/overwrite class driver support. +// Can be implemented by application to extend/overwrite class driver support. // Note: The drivers array must be accessible at all time when stack is active usbd_class_driver_t const* usbd_app_driver_get_cb(uint8_t* driver_count) TU_ATTR_WEAK; @@ -96,26 +105,35 @@ void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr); // Check if endpoint is stalled bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr); +// Allocate packet buffer used by ISO endpoints +bool usbd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size); + +// Configure and enable an ISO endpoint according to descriptor +bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc); + // Check if endpoint is ready (not busy and not stalled) TU_ATTR_ALWAYS_INLINE static inline -bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) -{ +bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) { return !usbd_edpt_busy(rhport, ep_addr) && !usbd_edpt_stalled(rhport, ep_addr); } // Enable SOF interrupt -void usbd_sof_enable(uint8_t rhport, bool en); +void usbd_sof_enable(uint8_t rhport, sof_consumer_t consumer, bool en); /*------------------------------------------------------------------*/ /* Helper *------------------------------------------------------------------*/ bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in); -void usbd_defer_func( osal_task_func_t func, void* param, bool in_isr ); +void usbd_defer_func(osal_task_func_t func, void *param, bool in_isr); +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL +void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); +#endif + #ifdef __cplusplus } #endif -#endif /* USBD_PVT_H_ */ +#endif |