diff options
Diffstat (limited to 'src/tusb_option.h')
| -rw-r--r-- | src/tusb_option.h | 111 |
1 files changed, 69 insertions, 42 deletions
diff --git a/src/tusb_option.h b/src/tusb_option.h index 08a0ba2ef..d87c2dc8b 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -216,6 +216,7 @@ #define OPT_MCU_AT32F402_405 2504 ///< ArteryTek AT32F402_405 #define OPT_MCU_AT32F425 2505 ///< ArteryTek AT32F425 #define OPT_MCU_AT32F413 2506 ///< ArteryTek AT32F413 +#define OPT_MCU_AT32F45X 2507 ///< ArteryTek AT32F45x // HPMicro #define OPT_MCU_HPM 2600 ///< HPMicro @@ -271,6 +272,25 @@ // USBIP //--------------------------------------------------------------------+ +//------------- ChipIdea -------------// +// Enable CI_HS VBUS Charge. Set this to 1 if the USB_VBUS pin is not connected to 5V VBUS (note: 3.3V is +// insufficient). +#ifndef CFG_TUD_CI_HS_VBUS_CHARGE + #ifndef CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT + #define CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT 0 + #endif + #define CFG_TUD_CI_HS_VBUS_CHARGE CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT +#endif + +// CI_HS support FIFO transfer if endpoint buffer is 4k aligned and size is multiple of 4k, also DCACHE is disabled +#ifndef CFG_TUD_CI_HS_EPBUF_4K_ALIGNED + #define CFG_TUD_CI_HS_EPBUF_4K_ALIGNED 0 +#endif + +#if CFG_TUD_CI_HS_EPBUF_4K_ALIGNED && !CFG_TUD_MEM_DCACHE_ENABLE + #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 +#endif + //------------- DWC2 -------------// // DMA mode for device #ifndef CFG_TUD_DWC2_DMA_ENABLE @@ -316,57 +336,28 @@ #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 // fixed hwfifo address #endif -//------------- ChipIdea -------------// -// Enable CI_HS VBUS Charge. Set this to 1 if the USB_VBUS pin is not connected to 5V VBUS (note: 3.3V is -// insufficient). -#ifndef CFG_TUD_CI_HS_VBUS_CHARGE - #ifndef CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT - #define CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT 0 - #endif - #define CFG_TUD_CI_HS_VBUS_CHARGE CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT -#endif - -// CI_HS support FIFO transfer if endpoint buffer is 4k aligned and size is multiple of 4k, also DCACHE is disabled -#ifndef CFG_TUD_CI_HS_EPBUF_4K_ALIGNED - #define CFG_TUD_CI_HS_EPBUF_4K_ALIGNED 0 -#endif - -#if CFG_TUD_CI_HS_EPBUF_4K_ALIGNED && !CFG_TUD_MEM_DCACHE_ENABLE - #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 -#endif - -//------------- pio-usb -------------// -// Enable PIO-USB software host controller -#ifndef CFG_TUH_RPI_PIO_USB - #define CFG_TUH_RPI_PIO_USB 0 -#endif - -#ifndef CFG_TUD_RPI_PIO_USB - #define CFG_TUD_RPI_PIO_USB 0 -#endif - -//------------ MAX3421 -------------// -// Enable MAX3421 USB host controller -#ifndef CFG_TUH_MAX3421 - #define CFG_TUH_MAX3421 0 -#endif - //------------ FSDEV --------------// #if defined(TUP_USBIP_FSDEV) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #if CFG_TUSB_FSDEV_PMA_SIZE == 512 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data + #if CFG_TUSB_FSDEV_PMA_SIZE == 2048 || TU_CHECK_MCU(OPT_MCU_STM32U0) + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase #elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 2 // 16-bit address increase - #elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32-bit data + #elif CFG_TUSB_FSDEV_PMA_SIZE == 512 + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase #endif #endif +//------------ MAX3421 -------------// +// Enable MAX3421 USB host controller +#ifndef CFG_TUH_MAX3421 + #define CFG_TUH_MAX3421 0 +#endif + //------------ MUSB --------------// #if defined(TUP_USBIP_MUSB) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 @@ -374,13 +365,30 @@ #define CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS // allow odd 16bit access #define CFG_TUSB_FIFO_HWFIFO_DATA_ODD_8BIT_ACCESS // allow odd 8bit access #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 // fixed hwfifo +#endif + +//------------- Raspberry Pi -------------// +// Enable PIO-USB software host controller +#ifndef CFG_TUH_RPI_PIO_USB + #define CFG_TUH_RPI_PIO_USB 0 +#endif +#ifndef CFG_TUD_RPI_PIO_USB + #define CFG_TUD_RPI_PIO_USB 0 +#endif + +#if (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUD_RPI_PIO_USB + #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 1 + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 1 + #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE + #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_READ #endif //------------ RUSB2 --------------// #if defined(TUP_USBIP_RUSB2) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (2 | (TUD_OPT_HIGH_SPEED ? 4 : 0)) // 16 bit and 32 bit data if highspeed + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (2 | (TUD_OPT_HIGH_SPEED ? 4 : 0)) // 16 bit and 32 bit if highspeed #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE // custom write since rusb2 can change access width 32 -> 16 and can write // odd byte with byte access @@ -552,6 +560,11 @@ #define CFG_TUD_INTERFACE_MAX 16 #endif +// max events processed in one tud_task_ext() call, 0 for unlimited +#ifndef CFG_TUD_TASK_EVENTS_PER_RUN + #define CFG_TUD_TASK_EVENTS_PER_RUN 16 +#endif + // default to max hardware endpoint, but can be smaller to save RAM #ifndef CFG_TUD_ENDPPOINT_MAX #define CFG_TUD_ENDPPOINT_MAX TUP_DCD_ENDPOINT_MAX @@ -566,9 +579,18 @@ #define CFG_TUD_TEST_MODE 0 #endif +#ifndef CFG_TUD_VBUS_DETECT_HW_DEFAULT + #define CFG_TUD_VBUS_DETECT_HW_DEFAULT 0 +#endif + +// Enable VBUS Detect hardware, usually via functional GPIO +#ifndef CFG_TUD_VBUS_DETECT_HW + #define CFG_TUD_VBUS_DETECT_HW CFG_TUD_VBUS_DETECT_HW_DEFAULT +#endif + //------------- Device Class Driver -------------// #ifndef CFG_TUD_BTH - #define CFG_TUD_BTH 0 + #define CFG_TUD_BTH 0 #endif #if CFG_TUD_BTH && !defined(CFG_TUD_BTH_ISO_ALT_COUNT) @@ -671,6 +693,11 @@ #define CFG_TUH_MEM_DCACHE_LINE_SIZE CFG_TUSB_MEM_DCACHE_LINE_SIZE #endif +// max events processed in one tuh_task_ext() call, 0 for unlimited +#ifndef CFG_TUH_TASK_EVENTS_PER_RUN + #define CFG_TUH_TASK_EVENTS_PER_RUN 16 +#endif + //------------- CLASS -------------// #ifndef CFG_TUH_HUB @@ -742,7 +769,7 @@ #define CFG_TUH_CDC_PL2303 0 #endif -#ifndef CFG_TUH_CDC_PL2303_VID_PID_QUIRKS_LIST +#ifndef CFG_TUH_CDC_PL2303_VID_PID_LIST // List of product IDs that can use the PL2303 CDC driver #define CFG_TUH_CDC_PL2303_VID_PID_LIST \ { 0x067b, 0x2303 }, /* initial 2303 */ \ |