diff options
Diffstat (limited to 'src')
45 files changed, 177 insertions, 134 deletions
diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 4a8a60192..1dda8af99 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -503,10 +503,10 @@ static bool audiod_rx_xfer_isr(uint8_t rhport, audiod_function_t* audio, uint16_ TU_VERIFY(0 < tu_fifo_write_n(&audio->ep_out_ff, audio->lin_buf_out, n_bytes_received)); // Schedule for next receive - TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); + TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz, true)); #else // Data is already placed in EP FIFO, schedule for next receive - TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_out, &audio->ep_out_ff, audio->ep_out_sz), false); + TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_out, &audio->ep_out_ff, audio->ep_out_sz, true)); #endif #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -574,10 +574,10 @@ static bool audiod_tx_xfer_isr(uint8_t rhport, audiod_function_t * audio, uint16 #endif #if USE_LINEAR_BUFFER_TX tu_fifo_read_n(&audio->ep_in_ff, audio->lin_buf_in, n_bytes_tx); - TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, n_bytes_tx)); + TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, n_bytes_tx, true)); #else // Send everything in ISO EP FIFO - TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_in, &audio->ep_in_ff, n_bytes_tx)); + TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_in, &audio->ep_in_ff, n_bytes_tx, true)); #endif // Call a weak callback here - a possibility for user to get informed former TX was completed and data gets now loaded into EP in buffer @@ -610,7 +610,7 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) // Check length if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, size) == 0) { // Schedule transmit - TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, size), 0); + TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, size, false)); } else { // Release endpoint since we don't make any transfer usbd_edpt_release(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int); @@ -622,7 +622,7 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // This function is called once a transmit of a feedback packet was successfully completed. Here, we get the next feedback value to be sent -static inline bool audiod_fb_send(uint8_t func_id) { +static inline bool audiod_fb_send(uint8_t func_id, bool is_isr) { audiod_function_t *audio = &_audiod_fct[func_id]; uint8_t uac_version = tud_audio_n_version(func_id); // Format the feedback value @@ -638,7 +638,7 @@ static inline bool audiod_fb_send(uint8_t func_id) { *audio->fb_buf = audio->feedback.value; } - return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) audio->fb_buf, uac_version == 1 ? 3 : 4); + return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) audio->fb_buf, uac_version == 1 ? 3 : 4, is_isr); } uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { @@ -1208,10 +1208,10 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p #endif // Schedule first transmit if alternate interface is not zero, as sample data is available a ZLP is loaded #if USE_LINEAR_BUFFER_TX - TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, 0)); + TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, 0, false)); #else // Send everything in ISO EP FIFO - TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_in, &audio->ep_in_ff, 0)); + TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_in, &audio->ep_in_ff, 0, false)); #endif } #endif// CFG_TUD_AUDIO_ENABLE_EP_IN @@ -1227,9 +1227,9 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p // Prepare for incoming data #if USE_LINEAR_BUFFER_RX - TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); + TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz, false)); #else - TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_out, &audio->ep_out_ff, audio->ep_out_sz), false); + TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_out, &audio->ep_out_ff, audio->ep_out_sz, false)); #endif } @@ -1239,7 +1239,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p audio->ep_fb = ep_addr; audio->feedback.frame_shift = desc_ep->bInterval - 1; // Schedule first feedback transmit - audiod_fb_send(func_id); + audiod_fb_send(func_id, false); } #else (void) is_feedback_ep; @@ -1538,7 +1538,7 @@ bool audiod_xfer_isr(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint if (audio->ep_fb == ep_addr) { // Schedule a transmit with the new value if EP is not busy // Schedule next transmission - value is changed bytud_audio_n_fb_set() in the meantime or the old value gets sent - audiod_fb_send(func_id); + audiod_fb_send(func_id, true); return true; } #endif diff --git a/src/class/bth/bth_device.c b/src/class/bth/bth_device.c index 3f1529cb6..b679d6ab6 100755 --- a/src/class/bth/bth_device.c +++ b/src/class/bth/bth_device.c @@ -67,7 +67,7 @@ static bool bt_tx_data(uint8_t ep, void *data, uint16_t len) { // skip if previous transfer not complete TU_VERIFY(!usbd_edpt_busy(rhport, ep)); - TU_ASSERT(usbd_edpt_xfer(rhport, ep, data, len)); + TU_ASSERT(usbd_edpt_xfer(rhport, ep, data, len, false)); return true; } @@ -169,7 +169,7 @@ uint16_t btd_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint16_ itf_desc = (tusb_desc_interface_t const *) tu_desc_next(tu_desc_next(desc_ep)); // Prepare for incoming data from host - TU_ASSERT(usbd_edpt_xfer(rhport, _btd_itf.ep_acl_out, _btd_epbuf.epout_buf, CFG_TUD_BTH_DATA_EPSIZE), 0); + TU_ASSERT(usbd_edpt_xfer(rhport, _btd_itf.ep_acl_out, _btd_epbuf.epout_buf, CFG_TUD_BTH_DATA_EPSIZE, false), 0); drv_len = hci_itf_size; @@ -272,7 +272,7 @@ bool btd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, tud_bt_acl_data_received_cb(_btd_epbuf.epout_buf, xferred_bytes); // prepare for next data - TU_ASSERT(usbd_edpt_xfer(rhport, _btd_itf.ep_acl_out, _btd_epbuf.epout_buf, CFG_TUD_BTH_DATA_EPSIZE)); + TU_ASSERT(usbd_edpt_xfer(rhport, _btd_itf.ep_acl_out, _btd_epbuf.epout_buf, CFG_TUD_BTH_DATA_EPSIZE, false)); } else if (ep_addr == _btd_itf.ep_ev) { tud_bt_event_sent_cb((uint16_t) xferred_bytes); } else if (ep_addr == _btd_itf.ep_acl_in) { diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index babb89952..9e62c6509 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -181,7 +181,7 @@ bool tud_cdc_n_notify_uart_state (uint8_t itf, const cdc_notify_uart_state_t *st notify_msg->request.wLength = sizeof(cdc_notify_uart_state_t); notify_msg->serial_state = *state; - return usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_notify, (uint8_t *)notify_msg, 8 + sizeof(cdc_notify_uart_state_t)); + return usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_notify, (uint8_t *)notify_msg, 8 + sizeof(cdc_notify_uart_state_t), false); } bool tud_cdc_n_notify_conn_speed_change(uint8_t itf, const cdc_notify_conn_speed_change_t* conn_speed_change) { @@ -199,7 +199,7 @@ bool tud_cdc_n_notify_conn_speed_change(uint8_t itf, const cdc_notify_conn_speed notify_msg->request.wLength = sizeof(cdc_notify_conn_speed_change_t); notify_msg->conn_speed_change = *conn_speed_change; - return usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_notify, (uint8_t *)notify_msg, 8 + sizeof(cdc_notify_conn_speed_change_t)); + return usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_notify, (uint8_t *)notify_msg, 8 + sizeof(cdc_notify_conn_speed_change_t), false); } #endif diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index b4f24902b..6ee4cd9c1 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -128,7 +128,7 @@ bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const *report, u TU_VERIFY(0 == tu_memcpy_s(p_epbuf->epin, CFG_TUD_HID_EP_BUFSIZE, report, len)); } - return usbd_edpt_xfer(rhport, p_hid->ep_in, p_epbuf->epin, len); + return usbd_edpt_xfer(rhport, p_hid->ep_in, p_epbuf->epin, len, false); } uint8_t tud_hid_n_interface_protocol(uint8_t instance) { @@ -263,7 +263,7 @@ uint16_t hidd_open(uint8_t rhport, tusb_desc_interface_t const *desc_itf, uint16 // Prepare for output endpoint if (p_hid->ep_out) { - TU_ASSERT(usbd_edpt_xfer(rhport, p_hid->ep_out, p_epbuf->epout, CFG_TUD_HID_EP_BUFSIZE), drv_len); + TU_ASSERT(usbd_edpt_xfer(rhport, p_hid->ep_out, p_epbuf->epout, CFG_TUD_HID_EP_BUFSIZE, false), drv_len); } return drv_len; @@ -413,7 +413,7 @@ bool hidd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ } // prepare for new transfer - TU_ASSERT(usbd_edpt_xfer(rhport, p_hid->ep_out, p_epbuf->epout, CFG_TUD_HID_EP_BUFSIZE)); + TU_ASSERT(usbd_edpt_xfer(rhport, p_hid->ep_out, p_epbuf->epout, CFG_TUD_HID_EP_BUFSIZE, false)); } return true; diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 41d9cdfa0..15bfafc35 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -115,13 +115,13 @@ TU_ATTR_ALWAYS_INLINE static inline bool send_csw(mscd_interface_t* p_msc) { p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; p_msc->stage = MSC_STAGE_STATUS_SENT; memcpy(_mscd_epbuf.buf, &p_msc->csw, sizeof(msc_csw_t)); //-V1086 - return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.buf, sizeof(msc_csw_t)); + return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.buf, sizeof(msc_csw_t), false); } TU_ATTR_ALWAYS_INLINE static inline bool prepare_cbw(mscd_interface_t* p_msc) { uint8_t rhport = p_msc->rhport; p_msc->stage = MSC_STAGE_CMD; - return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t)); + return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t), false); } static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { @@ -537,7 +537,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } else { // Didn't check for case 9 (Ho > Dn), which requires examining scsi command first // but it is OK to just receive data then responded with failed status - TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, (uint16_t) p_msc->total_len)); + TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, (uint16_t) p_msc->total_len, false)); } } else { // First process if it is a built-in commands @@ -569,7 +569,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } else { // cannot return more than host expect p_msc->total_len = tu_min32((uint32_t)resplen, p_cbw->total_bytes); - TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_epbuf.buf, (uint16_t) p_msc->total_len)); + TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_epbuf.buf, (uint16_t) p_msc->total_len, false)); } } } @@ -866,7 +866,7 @@ static void proc_read10_cmd(mscd_interface_t* p_msc) { static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { const uint8_t rhport = p_msc->rhport; if (nbytes > 0) { - TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_epbuf.buf, (uint16_t) nbytes),); + TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_epbuf.buf, (uint16_t) nbytes, false),); } else { // nbytes is status switch (nbytes) { @@ -902,7 +902,7 @@ static void proc_write10_cmd(mscd_interface_t* p_msc) { // remaining bytes capped at class buffer uint16_t nbytes = (uint16_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len); // Write10 callback will be called later when usb transfer complete - TU_ASSERT(usbd_edpt_xfer(p_msc->rhport, p_msc->ep_out, _mscd_epbuf.buf, nbytes),); + TU_ASSERT(usbd_edpt_xfer(p_msc->rhport, p_msc->ep_out, _mscd_epbuf.buf, nbytes, false),); } // process new data arrived from WRITE10 diff --git a/src/class/mtp/mtp_device.c b/src/class/mtp/mtp_device.c index 04bde9415..764019e42 100644 --- a/src/class/mtp/mtp_device.c +++ b/src/class/mtp/mtp_device.c @@ -191,7 +191,7 @@ TU_ATTR_UNUSED static const char* _mtp_phase_str[] = { //--------------------------------------------------------------------+ static bool prepare_new_command(mtpd_interface_t* p_mtp) { p_mtp->phase = MTP_PHASE_COMMAND; - return usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_out, _mtpd_epbuf.buf, CFG_TUD_MTP_EP_BUFSIZE); + return usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_out, _mtpd_epbuf.buf, CFG_TUD_MTP_EP_BUFSIZE, false); } static bool mtpd_data_xfer(mtp_container_info_t* p_container, uint8_t ep_addr) { @@ -219,7 +219,7 @@ static bool mtpd_data_xfer(mtp_container_info_t* p_container, uint8_t ep_addr) { if (xact_len) { // already transferred all bytes in header's length. Application make an unnecessary extra call TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, ep_addr)); - TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, ep_addr, _mtpd_epbuf.buf, xact_len)); + TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, ep_addr, _mtpd_epbuf.buf, xact_len, false)); } return true; } @@ -238,7 +238,7 @@ bool tud_mtp_response_send(mtp_container_info_t* p_container) { p_container->header->type = MTP_CONTAINER_TYPE_RESPONSE_BLOCK; p_container->header->transaction_id = p_mtp->command.header.transaction_id; TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, p_mtp->ep_in)); - return usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_in, _mtpd_epbuf.buf, (uint16_t)p_container->header->len); + return usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_in, _mtpd_epbuf.buf, (uint16_t) p_container->header->len, false); } bool tud_mtp_mounted(void) { @@ -251,7 +251,7 @@ bool tud_mtp_event_send(mtp_event_t* event) { TU_VERIFY(p_mtp->ep_event != 0); _mtpd_epbuf.buf_event = *event; TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, p_mtp->ep_event)); // Claim the endpoint - return usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_event, (uint8_t*) &_mtpd_epbuf.buf_event, sizeof(mtp_event_t)); + return usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_event, (uint8_t*) &_mtpd_epbuf.buf_event, sizeof(mtp_event_t), false); } //--------------------------------------------------------------------+ diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c index 7dff66823..eaa82c187 100644 --- a/src/class/net/ecm_rndis_device.c +++ b/src/class/net/ecm_rndis_device.c @@ -82,12 +82,12 @@ static bool can_xmit; static bool ecm_link_is_up = true; // Store link state for ECM mode void tud_network_recv_renew(void) { - usbd_edpt_xfer(0, _netd_itf.ep_out, _netd_epbuf.rx, NETD_PACKET_SIZE); + usbd_edpt_xfer(0, _netd_itf.ep_out, _netd_epbuf.rx, NETD_PACKET_SIZE, false); } static void do_in_xfer(uint8_t *buf, uint16_t len) { can_xmit = false; - usbd_edpt_xfer(0, _netd_itf.ep_in, buf, len); + usbd_edpt_xfer(0, _netd_itf.ep_in, buf, len, false); } void netd_report(uint8_t *buf, uint16_t len) { @@ -100,7 +100,7 @@ void netd_report(uint8_t *buf, uint16_t len) { } memcpy(_netd_epbuf.notify, buf, len); - usbd_edpt_xfer(rhport, _netd_itf.ep_notif, _netd_epbuf.notify, len); + usbd_edpt_xfer(rhport, _netd_itf.ep_notif, _netd_epbuf.notify, len, false); } //--------------------------------------------------------------------+ diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index ea3c250fe..3e19b5f3a 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -201,7 +201,7 @@ static void notification_xmit(uint8_t rhport, bool force_next) { uint16_t notif_len = sizeof(notify_speed_change.header) + notify_speed_change.header.wLength; ncm_epbuf.epnotif = notify_speed_change; - usbd_edpt_xfer(rhport, ncm_interface.ep_notif, (uint8_t*) &ncm_epbuf.epnotif, notif_len); + usbd_edpt_xfer(rhport, ncm_interface.ep_notif, (uint8_t*) &ncm_epbuf.epnotif, notif_len, false); ncm_interface.notification_xmit_state = NOTIFICATION_CONNECTED; ncm_interface.notification_xmit_is_running = true; @@ -223,7 +223,7 @@ static void notification_xmit(uint8_t rhport, bool force_next) { uint16_t notif_len = sizeof(notify_connected.header) + notify_connected.header.wLength; ncm_epbuf.epnotif = notify_connected; - usbd_edpt_xfer(rhport, ncm_interface.ep_notif, (uint8_t *) &ncm_epbuf.epnotif, notif_len); + usbd_edpt_xfer(rhport, ncm_interface.ep_notif, (uint8_t *) &ncm_epbuf.epnotif, notif_len, false); ncm_interface.notification_xmit_state = NOTIFICATION_DONE; ncm_interface.notification_xmit_is_running = true; @@ -327,7 +327,7 @@ static bool xmit_insert_required_zlp(uint8_t rhport, uint32_t xferred_bytes) { TU_LOG_DRV("xmit_insert_required_zlp! (%u)\n", (unsigned) xferred_bytes); // start transmission of the ZLP - usbd_edpt_xfer(rhport, ncm_interface.ep_in, NULL, 0); + usbd_edpt_xfer(rhport, ncm_interface.ep_in, NULL, 0, false); return true; } // xmit_insert_required_zlp @@ -373,7 +373,7 @@ static void xmit_start_if_possible(uint8_t rhport) { } // Kick off an endpoint transfer - usbd_edpt_xfer(0, ncm_interface.ep_in, ncm_interface.xmit_tinyusb_ntb->data, ncm_interface.xmit_tinyusb_ntb->nth.wBlockLength); + usbd_edpt_xfer(0, ncm_interface.ep_in, ncm_interface.xmit_tinyusb_ntb->data, ncm_interface.xmit_tinyusb_ntb->nth.wBlockLength, false); } // xmit_start_if_possible /** @@ -522,7 +522,7 @@ static void recv_try_to_start_new_reception(uint8_t rhport) { // initiate transfer TU_LOG_DRV(" start reception\n"); - bool r = usbd_edpt_xfer(rhport, ncm_interface.ep_out, ncm_interface.recv_tinyusb_ntb->data, CFG_TUD_NCM_OUT_NTB_MAX_SIZE); + bool r = usbd_edpt_xfer(rhport, ncm_interface.ep_out, ncm_interface.recv_tinyusb_ntb->data, CFG_TUD_NCM_OUT_NTB_MAX_SIZE, false); if (!r) { recv_put_ntb_into_free_list(ncm_interface.recv_tinyusb_ntb); ncm_interface.recv_tinyusb_ntb = NULL; diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 3f6bedd4c..4b0bb01ec 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -261,7 +261,7 @@ bool tud_usbtmc_transmit_dev_msg_data( bool stateChanged = atomicChangeState(STATE_TX_REQUESTED, (packetLen >= txBufLen) ? STATE_TX_INITIATED : STATE_TX_SHORTED); TU_VERIFY(stateChanged); - TU_VERIFY(usbd_edpt_xfer(usbtmc_state.rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, (uint16_t) packetLen)); + TU_VERIFY(usbd_edpt_xfer(usbtmc_state.rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, (uint16_t) packetLen, false)); return true; } @@ -273,7 +273,7 @@ bool tud_usbtmc_transmit_notification_data(const void *data, size_t len) { TU_VERIFY(usbd_edpt_busy(usbtmc_state.rhport, usbtmc_state.ep_int_in)); TU_VERIFY(tu_memcpy_s(usbtmc_epbuf.epnotif, CFG_TUD_USBTMC_INT_EP_SIZE, data, len) == 0); - TU_VERIFY(usbd_edpt_xfer(usbtmc_state.rhport, usbtmc_state.ep_int_in, usbtmc_epbuf.epnotif, (uint16_t) len)); + TU_VERIFY(usbd_edpt_xfer(usbtmc_state.rhport, usbtmc_state.ep_int_in, usbtmc_epbuf.epnotif, (uint16_t) len, false)); return true; } @@ -396,7 +396,7 @@ bool tud_usbtmc_start_bus_read(void) { default: return false; } - TU_VERIFY(usbd_edpt_xfer(usbtmc_state.rhport, usbtmc_state.ep_bulk_out, usbtmc_epbuf.epout, (uint16_t) usbtmc_state.ep_bulk_out_wMaxPacketSize)); + TU_VERIFY(usbd_edpt_xfer(usbtmc_state.rhport, usbtmc_state.ep_bulk_out, usbtmc_epbuf.epout, (uint16_t) usbtmc_state.ep_bulk_out_wMaxPacketSize, false)); return true; } @@ -567,7 +567,7 @@ bool usbtmcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint if (usbtmc_state.transfer_size_remaining >= USBTMCD_BUFFER_SIZE) { // Copy buffer to ensure alignment correctness memcpy(usbtmc_epbuf.epin, usbtmc_state.devInBuffer, USBTMCD_BUFFER_SIZE); - TU_VERIFY(usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, USBTMCD_BUFFER_SIZE)); + TU_VERIFY(usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, USBTMCD_BUFFER_SIZE, false)); usbtmc_state.devInBuffer += USBTMCD_BUFFER_SIZE; usbtmc_state.transfer_size_remaining -= USBTMCD_BUFFER_SIZE; usbtmc_state.transfer_size_sent += USBTMCD_BUFFER_SIZE; @@ -578,7 +578,7 @@ bool usbtmcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint usbtmc_state.transfer_size_sent += packetLen; usbtmc_state.transfer_size_remaining = 0; usbtmc_state.devInBuffer = NULL; - TU_VERIFY(usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, (uint16_t) packetLen)); + TU_VERIFY(usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, (uint16_t) packetLen, false)); if (((packetLen % usbtmc_state.ep_bulk_in_wMaxPacketSize) != 0) || (packetLen == 0)) { usbtmc_state.state = STATE_TX_SHORTED; } @@ -587,7 +587,7 @@ bool usbtmcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint case STATE_ABORTING_BULK_IN: // need to send short packet (ZLP?) - TU_VERIFY(usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, (uint16_t) 0u)); + TU_VERIFY(usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, (uint16_t) 0u, false)); usbtmc_state.state = STATE_ABORTING_BULK_IN_SHORTED; return true; @@ -713,7 +713,7 @@ bool usbtmcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request criticalLeave(); if (usbtmc_state.transfer_size_sent == 0) { // Send short packet, nothing is in the buffer yet - TU_VERIFY(usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, (uint16_t) 0u)); + TU_VERIFY(usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_epbuf.epin, (uint16_t) 0u, false)); usbtmc_state.state = STATE_ABORTING_BULK_IN_SHORTED; } TU_VERIFY(tud_usbtmc_initiate_abort_bulk_in_cb(&(rsp.USBTMC_status))); @@ -841,7 +841,7 @@ bool usbtmcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request }, .StatusByte = tud_usbtmc_get_stb_cb(&(rsp.USBTMC_status))}; // Must be queued before control request response sent (USB488v1.0 4.3.1.2) - usbd_edpt_xfer(rhport, usbtmc_state.ep_int_in, (void *) &intMsg, sizeof(intMsg)); + usbd_edpt_xfer(rhport, usbtmc_state.ep_int_in, (void *) &intMsg, sizeof(intMsg), false); } } else { rsp.statusByte = tud_usbtmc_get_stb_cb(&(rsp.USBTMC_status)); diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 844a5e672..b2375def9 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -1308,7 +1308,7 @@ bool tud_video_n_frame_xfer(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void *bu stm->buffer = (uint8_t*)buffer; stm->bufsize = bufsize; uint_fast16_t pkt_len = _prepare_in_payload(stm, stm_epbuf->buf); - TU_ASSERT( usbd_edpt_xfer(0, ep_addr, stm_epbuf->buf, (uint16_t) pkt_len), 0); + TU_ASSERT( usbd_edpt_xfer(0, ep_addr, stm_epbuf->buf, (uint16_t) pkt_len, false), 0); return true; } @@ -1501,7 +1501,7 @@ bool videod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 /* Claim the endpoint */ TU_VERIFY(usbd_edpt_claim(rhport, ep_addr), 0); uint_fast16_t pkt_len = _prepare_in_payload(stm, stm_epbuf->buf); - TU_ASSERT(usbd_edpt_xfer(rhport, ep_addr, stm_epbuf->buf, (uint16_t) pkt_len), 0); + TU_ASSERT(usbd_edpt_xfer(rhport, ep_addr, stm_epbuf->buf, (uint16_t) pkt_len, false), 0); } else { stm->buffer = NULL; stm->bufsize = 0; diff --git a/src/device/dcd.h b/src/device/dcd.h index 353f836ee..8a074ab47 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -158,11 +158,11 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc void dcd_edpt_close_all (uint8_t rhport); // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes); +bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr); // Submit an transfer using fifo, When complete dcd_event_xfer_complete() is invoked to notify the stack // This API is optional, may be useful for register-based for transferring data. -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes); +bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr); // Stall endpoint, any queuing transfer should be removed from endpoint void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr); diff --git a/src/device/usbd.c b/src/device/usbd.c index cf96f050d..d4dfae4b4 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -419,8 +419,8 @@ TU_ATTR_WEAK usbd_class_driver_t const* usbd_app_driver_get_cb(uint8_t* driver_c return NULL; } -TU_ATTR_WEAK bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) { - (void) rhport; (void) ep_addr; (void) ff; (void) total_bytes; +TU_ATTR_WEAK bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) rhport; (void) ep_addr; (void) ff; (void) total_bytes; (void) is_isr; return false; } @@ -1432,7 +1432,7 @@ bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr) { return tu_edpt_release(ep_state, _usbd_mutex); } -bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { +bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes, bool is_isr) { rhport = _usbd_rhport; uint8_t const epnum = tu_edpt_number(ep_addr); @@ -1455,7 +1455,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t t // could return and USBD task can preempt and clear the busy _usbd_dev.ep_status[epnum][dir].busy = 1; - if (dcd_edpt_xfer(rhport, ep_addr, buffer, total_bytes)) { + if (dcd_edpt_xfer(rhport, ep_addr, buffer, total_bytes, is_isr)) { return true; } else { // DCD error, mark endpoint as ready to allow next transfer @@ -1471,7 +1471,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t t // bytes should be written and second to keep the return value free to give back a boolean // success message. If total_bytes is too big, the FIFO will copy only what is available // into the USB buffer! -bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes) { +bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes, bool is_isr) { rhport = _usbd_rhport; uint8_t const epnum = tu_edpt_number(ep_addr); @@ -1486,7 +1486,7 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_ // and usbd task can preempt and clear the busy _usbd_dev.ep_status[epnum][dir].busy = 1; - if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes)) { + if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes, is_isr)) { TU_LOG_USBD("OK\r\n"); return true; } else { diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index 996e7387f..47d58a1f9 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -71,7 +71,7 @@ CFG_TUD_MEM_SECTION static struct { static inline bool status_stage_xact(uint8_t rhport, const tusb_control_request_t* request) { // Opposite to endpoint in Data Phase const uint8_t ep_addr = request->bmRequestType_bit.direction ? EDPT_CTRL_OUT : EDPT_CTRL_IN; - return usbd_edpt_xfer(rhport, ep_addr, NULL, 0); + return usbd_edpt_xfer(rhport, ep_addr, NULL, 0, false); } // Status phase @@ -98,7 +98,7 @@ static bool data_stage_xact(uint8_t rhport) { } } - return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _ctrl_epbuf.buf : NULL, xact_len); + return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _ctrl_epbuf.buf : NULL, xact_len, false); } // Transmit data to/from the control endpoint. diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 6e220129a..72323ac80 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -84,10 +84,10 @@ bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep); void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr); // Submit a usb transfer -bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes); +bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr); // Submit a usb ISO transfer by use of a FIFO (ring buffer) - all bytes in FIFO get transmitted -bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes); +bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr); // Claim an endpoint before submitting a transfer. // If caller does not make any transfer, it must release endpoint for others. diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 6ed4be410..89477b9ac 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -556,7 +556,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) (void)dev_addr; // Respond with status. There is no checking that the address is in range. - dcd_edpt_xfer(rhport, tu_edpt_addr(USBD_EP_0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(USBD_EP_0, TUSB_DIR_IN), NULL, 0, false); // Set the update bit for the address register. dev_addr |= 0x80; @@ -821,8 +821,9 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void)rhport; uint8_t ep_number = tu_edpt_number(ep_addr); uint8_t ep_dir = tu_edpt_dir(ep_addr); @@ -905,8 +906,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to } // Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void)rhport; (void)ep_addr; (void)ff; diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 40ad4cf82..312a98299 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -131,7 +131,7 @@ static void prepare_next_setup_packet(uint8_t rhport) _dcd.bdt[0][1][in_odd].data = 1; _dcd.bdt[0][1][in_odd ^ 1].data = 0; dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), - _dcd.setup_packet, sizeof(_dcd.setup_packet)); + _dcd.setup_packet, sizeof(_dcd.setup_packet), false); } static void process_stall(uint8_t rhport) @@ -303,7 +303,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { _dcd.addr = dev_addr & 0x7F; /* Response with status first before changing device address */ - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); } void dcd_remote_wakeup(uint8_t rhport) @@ -415,8 +415,9 @@ void dcd_edpt_close_all(uint8_t rhport) { } } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; const unsigned epn = tu_edpt_number(ep_addr); const unsigned dir = tu_edpt_dir(ep_addr); endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 8c5253eb9..c6d405e98 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -277,7 +277,7 @@ void dcd_int_disable(uint8_t rhport) void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { // Response with status first before changing device address - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); dcd_reg->DEVICEADDR = (dev_addr << 25) | TU_BIT(24); @@ -504,8 +504,9 @@ static void qhd_start_xfer(uint8_t rhport, uint8_t epnum, uint8_t dir) dcd_reg->ENDPTPRIME = TU_BIT(epnum + (dir ? 16 : 0)); } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); @@ -525,8 +526,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t #if !CFG_TUD_MEM_DCACHE_ENABLE // fifo has to be aligned to 4k boundary // It's incompatible with dcache enabled transfer, since neither address nor size is aligned to cache line -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c index 868a10dd9..a283c8362 100644 --- a/src/portable/dialog/da146xx/dcd_da146xx.c +++ b/src/portable/dialog/da146xx/dcd_da146xx.c @@ -837,7 +837,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) // Set default address for one ZLP USB->USB_EPC0_REG = USB_USB_EPC0_REG_USB_DEF_Msk; USB->USB_FAR_REG = (dev_addr & USB_USB_FAR_REG_USB_AD_Msk) | USB_USB_FAR_REG_USB_AD_EN_Msk; - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); } void dcd_remote_wakeup(uint8_t rhport) @@ -1040,8 +1040,9 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) } #endif -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index 4fce08dd9..1e4ec0015 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -772,8 +772,9 @@ void dcd_edpt_close_all(uint8_t rhport) } // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void)rhport; bool ret; // TU_LOG1("X %x %d\r\n", ep_addr, total_bytes); @@ -794,8 +795,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t // Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack // - optional, however, must be listed in usbd.c -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void)rhport; bool ret; // TU_LOG1("X %x %d\r\n", ep_addr, total_bytes); diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 8413a7ddd..fedede8ab 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -545,7 +545,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { _dcd.addr = dev_addr & 0x7F; /* Response with status first before changing device address */ - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); } void dcd_remote_wakeup(uint8_t rhport) @@ -702,8 +702,9 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) } #endif -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; const unsigned epn = tu_edpt_number(ep_addr); const unsigned dir = tu_edpt_dir(ep_addr); diff --git a/src/portable/microchip/pic32mz/dcd_pic32mz.c b/src/portable/microchip/pic32mz/dcd_pic32mz.c index b039bb505..94ecf1455 100644 --- a/src/portable/microchip/pic32mz/dcd_pic32mz.c +++ b/src/portable/microchip/pic32mz/dcd_pic32mz.c @@ -452,8 +452,9 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index 383cf60e5..cdfb00e3c 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -142,7 +142,7 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr) (void) dev_addr; // Response with zlp status - dcd_edpt_xfer(rhport, 0x80, NULL, 0); + dcd_edpt_xfer(rhport, 0x80, NULL, 0, false); // DCD can only set address after status for this request is complete // do it at dcd_edpt0_status_complete() @@ -264,8 +264,9 @@ void dcd_edpt_close_all (uint8_t rhport) // TODO implement dcd_edpt_close_all() } -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c index 879b2eb2b..149eee794 100644 --- a/src/portable/microchip/samg/dcd_samg.c +++ b/src/portable/microchip/samg/dcd_samg.c @@ -175,7 +175,7 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr) (void) dev_addr; // Response with zlp status - dcd_edpt_xfer(rhport, 0x80, NULL, 0); + dcd_edpt_xfer(rhport, 0x80, NULL, 0, false); // DCD can only set address after status for this request is complete. // do it at dcd_edpt0_status_complete() @@ -290,8 +290,9 @@ void dcd_edpt_close_all (uint8_t rhport) } // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); @@ -317,8 +318,9 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t } #if 0 // TODO support dcd_edpt_xfer_fifo API -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; return true; } diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 51308f7a2..4d54f9057 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -132,7 +132,7 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr) // do it at dcd_edpt0_status_complete() // Response with zlp status - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); } // Wake up host @@ -607,8 +607,9 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix) } // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); @@ -668,8 +669,9 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // bytes should be written and second to keep the return value free to give back a boolean // success message. If total_bytes is too big, the FIFO will copy only what is available // into the USB buffer! -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index a232810a2..6f88e0a24 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -122,7 +122,7 @@ static void prepare_next_setup_packet(uint8_t rhport) { _dcd.bdt[0][0][out_odd ^ 1].data = 1; _dcd.bdt[0][1][in_odd].data = 1; _dcd.bdt[0][1][in_odd ^ 1].data = 0; - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), _dcd.setup_packet, sizeof(_dcd.setup_packet)); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), _dcd.setup_packet, sizeof(_dcd.setup_packet), false); } static void process_stall(uint8_t rhport) { @@ -268,7 +268,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { (void)rhport; _dcd.addr = dev_addr & 0x7F; /* Response with status first before changing device address */ - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); } #ifdef __GNUC__ // caused by extra declaration of SystemCoreClock in freeRTOSConfig.h @@ -377,7 +377,8 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) } #endif -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void)rhport; NVIC_DisableIRQ(USB_FS_IRQn); const unsigned epn = ep_addr & 0xFu; diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 730ca7fb1..82b6db5fd 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -441,8 +441,9 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) } #endif -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes, bool is_isr) { (void) rhport; + (void) is_isr; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); diff --git a/src/portable/nuvoton/nuc120/dcd_nuc120.c b/src/portable/nuvoton/nuc120/dcd_nuc120.c index 0edebf159..d9a0e3fa8 100644 --- a/src/portable/nuvoton/nuc120/dcd_nuc120.c +++ b/src/portable/nuvoton/nuc120/dcd_nuc120.c @@ -294,8 +294,9 @@ void dcd_edpt_close_all (uint8_t rhport) // TODO implement dcd_edpt_close_all() } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; /* mine the data for the information we need */ @@ -326,8 +327,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to } #if 0 // TODO support dcd_edpt_xfer_fifo API -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; /* mine the data for the information we need */ diff --git a/src/portable/nuvoton/nuc121/dcd_nuc121.c b/src/portable/nuvoton/nuc121/dcd_nuc121.c index 804a35565..42fb58a0a 100644 --- a/src/portable/nuvoton/nuc121/dcd_nuc121.c +++ b/src/portable/nuvoton/nuc121/dcd_nuc121.c @@ -333,8 +333,9 @@ void dcd_edpt_close_all (uint8_t rhport) // TODO implement dcd_edpt_close_all() } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; /* mine the data for the information we need */ @@ -365,8 +366,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to } #if 0 // TODO support dcd_edpt_xfer_fifo API -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; /* mine the data for the information we need */ diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index 6195015ae..7c80f06d9 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -386,8 +386,9 @@ void dcd_edpt_close_all (uint8_t rhport) // TODO implement dcd_edpt_close_all() } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; if (0x80 == ep_addr) /* control EP0 IN */ @@ -447,8 +448,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to } #if 0 // TODO support dcd_edpt_xfer_fifo API -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; TU_ASSERT(0x80 != ep_addr && 0x00 != ep_addr); // Must not be used for control stuff diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 9edaadf58..ad27b8528 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -129,7 +129,7 @@ static void prepare_next_setup_packet(uint8_t rhport) _dcd.bdt[0][1][in_odd].data = 1; _dcd.bdt[0][1][in_odd ^ 1].data = 0; dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), - _dcd.setup_packet, sizeof(_dcd.setup_packet)); + _dcd.setup_packet, sizeof(_dcd.setup_packet), false); } static void process_stall(uint8_t rhport) @@ -314,7 +314,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { _dcd.addr = dev_addr & 0x7F; /* Response with status first before changing device address */ - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); } void dcd_remote_wakeup(uint8_t rhport) @@ -425,9 +425,10 @@ void dcd_edpt_close_all(uint8_t rhport) } } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { (void) rhport; + (void) is_isr; const unsigned epn = tu_edpt_number(ep_addr); const unsigned dir = tu_edpt_dir(ep_addr); endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index 5516e1ba6..349229c8d 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -205,7 +205,7 @@ void dcd_int_disable(uint8_t rhport) void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { // Response with status first before changing device address - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); sie_write(SIE_CMDCODE_SET_ADDRESS, 1, 0x80 | dev_addr); // 7th bit is : device_enable @@ -407,8 +407,9 @@ static bool control_xact(uint8_t rhport, uint8_t dir, uint8_t * buffer, uint8_t return true; } -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; // Control transfer is not DMA support, and must be done in slave mode if ( tu_edpt_number(ep_addr) == 0 ) { diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 1c135f3be..5f4a441dc 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -322,7 +322,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; // Response with status first before changing device address - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); dcd_reg->DEVCMDSTAT &= ~DEVCMDSTAT_DEVICE_ADDR_MASK; dcd_reg->DEVCMDSTAT |= dev_addr; @@ -479,7 +479,8 @@ static void prepare_ep_xfer(uint8_t rhport, uint8_t ep_id, uint16_t buf_offset, ep_cs[0].cmd_sts.active = 1; } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; uint8_t const ep_id = ep_addr2id(ep_addr); if (!buffer || total_bytes == 0) { diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 25ef117c2..78df2b6a6 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -76,7 +76,7 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr) { // must be called before queuing status pio_usb_device_set_address(dev_addr); - dcd_edpt_xfer(rhport, 0x80, NULL, 0); + dcd_edpt_xfer(rhport, 0x80, NULL, 0, false); } // Wake up host @@ -127,15 +127,16 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) } // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; endpoint_t *ep = pio_usb_device_get_endpoint_by_address(ep_addr); return pio_usb_ll_transfer_start(ep, buffer, total_bytes); } // Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c -//bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +//bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) //{ // (void) rhport; // (void) ep_addr; diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index a89c2f42b..15852f29f 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -526,7 +526,8 @@ void dcd_edpt_close_all(uint8_t rhport) { reset_non_control_endpoints(); } -bool dcd_edpt_xfer(__unused uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(__unused uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; assert(rhport == 0); hw_endpoint_xfer(ep_addr, buffer, total_bytes); return true; diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 2cc79aa74..7caf5d68a 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -874,8 +874,9 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) } #endif -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; rusb2_reg_t* rusb = RUSB2_REG(rhport); dcd_int_disable(rhport); @@ -885,8 +886,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to return r; } -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 TU_ASSERT(ff->item_size == 1); rusb2_reg_t* rusb = RUSB2_REG(rhport); diff --git a/src/portable/sony/cxd56/dcd_cxd56.c b/src/portable/sony/cxd56/dcd_cxd56.c index a13cd152c..be694edfa 100644 --- a/src/portable/sony/cxd56/dcd_cxd56.c +++ b/src/portable/sony/cxd56/dcd_cxd56.c @@ -358,8 +358,9 @@ void dcd_edpt_close_all (uint8_t rhport) // TODO implement dcd_edpt_close_all() } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; bool ret = true; diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index ed823a832..381aa0b40 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -246,7 +246,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { (void)dev_addr; // Respond with status - dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK | 0x00, NULL, 0); + dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK | 0x00, NULL, 0, false); // DCD can only set address after status for this request is complete. // do it at dcd_edpt0_status_complete() @@ -788,7 +788,8 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, tusb_dir_t dir) { return true; } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; uint8_t const ep_num = tu_edpt_number(ep_addr); tusb_dir_t const dir = tu_edpt_dir(ep_addr); xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); @@ -801,7 +802,8 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to return edpt_xfer(rhport, ep_num, dir); } -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t total_bytes) { +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; uint8_t const ep_num = tu_edpt_number(ep_addr); tusb_dir_t const dir = tu_edpt_dir(ep_addr); xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index 8e6dc8c63..d43ea1dc3 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -1098,8 +1098,9 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) #endif // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void)rhport; bool ret; // TU_LOG1("X %x %d\r\n", ep_addr, total_bytes); @@ -1117,8 +1118,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t } // Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void)rhport; bool ret; // TU_LOG1("X %x %d\r\n", ep_addr, total_bytes); diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 53b6821fa..e99cd29c6 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -515,7 +515,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { dwc2->dcfg = (dwc2->dcfg & ~DCFG_DAD_Msk) | (dev_addr << DCFG_DAD_Pos); // Response with status after changing device address - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); } void dcd_remote_wakeup(uint8_t rhport) { @@ -636,13 +636,14 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpo return true; } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); bool ret; - usbd_spin_lock(false); + usbd_spin_lock(is_isr); if (xfer->max_size == 0) { ret = false; // Endpoint is closed @@ -662,7 +663,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to ret = true; } - usbd_spin_unlock(false); + usbd_spin_unlock(is_isr); return ret; } @@ -671,7 +672,8 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to // bytes should be written and second to keep the return value free to give back a boolean // success message. If total_bytes is too big, the FIFO will copy only what is available // into the USB buffer! -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes) { +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 TU_ASSERT(ff->item_size == 1); @@ -680,7 +682,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); bool ret; - usbd_spin_lock(false); + usbd_spin_lock(is_isr); if (xfer->max_size == 0) { ret = false; // Endpoint is closed @@ -696,7 +698,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t ret = true; } - usbd_spin_unlock(false); + usbd_spin_unlock(is_isr); return ret; } diff --git a/src/portable/template/dcd_template.c b/src/portable/template/dcd_template.c index 3738ac0cb..90c672d19 100644 --- a/src/portable/template/dcd_template.c +++ b/src/portable/template/dcd_template.c @@ -113,7 +113,8 @@ void dcd_edpt_close_all (uint8_t rhport) { } // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; (void) ep_addr; (void) buffer; @@ -122,7 +123,8 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t } // Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) { +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; (void) ep_addr; (void) ff; diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index e4c28a56f..5f4b139d8 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -219,7 +219,7 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr) USBFUNADR = dev_addr; // Response with status after changing device address - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); } void dcd_remote_wakeup(uint8_t rhport) @@ -353,8 +353,9 @@ void dcd_edpt_close_all (uint8_t rhport) // TODO implement dcd_edpt_close_all() } -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); @@ -402,8 +403,9 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t } #if 0 // TODO support dcd_edpt_xfer_fifo API -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c index f0e52ae47..1b555b3b7 100644 --- a/src/portable/valentyusb/eptri/dcd_eptri.c +++ b/src/portable/valentyusb/eptri/dcd_eptri.c @@ -375,7 +375,7 @@ void dcd_int_disable(uint8_t rhport) void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { // Respond with ACK status first before changing device address - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0, false); // Wait for the response packet to get sent while (tx_active) @@ -483,8 +483,9 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) // IN endpoints will get un-stalled when more data is written. } -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void)rhport; uint8_t ep_num = tu_edpt_number(ep_addr); uint8_t ep_dir = tu_edpt_dir(ep_addr); diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index f8c3b05c3..5cd25e33e 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -218,7 +218,7 @@ void dcd_int_disable(uint8_t rhport) { void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { (void) dev_addr; - dcd_edpt_xfer(rhport, 0x80, NULL, 0); // zlp status response + dcd_edpt_xfer(rhport, 0x80, NULL, 0, false); // zlp status response } void dcd_remote_wakeup(uint8_t rhport) { @@ -296,8 +296,8 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) return false; } - -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; uint8_t ep = tu_edpt_number(ep_addr); uint8_t dir = tu_edpt_dir(ep_addr); diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 36fdc89ef..11734de37 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -204,7 +204,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { (void) dev_addr; // Response with zlp status - dcd_edpt_xfer(rhport, 0x80, NULL, 0); + dcd_edpt_xfer(rhport, 0x80, NULL, 0, false); } void dcd_remote_wakeup(uint8_t rhport) { @@ -331,7 +331,8 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { } } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { + (void) is_isr; (void) rhport; uint8_t const ep_num = tu_edpt_number(ep_addr); tusb_dir_t const dir = tu_edpt_dir(ep_addr); diff --git a/src/tusb.c b/src/tusb.c index 6fb5309ab..3852da76b 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -387,7 +387,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool stream_xfer(uint8_t hwid, tu_edpt_strea #endif } else { #if CFG_TUD_ENABLED - return usbd_edpt_xfer(hwid, s->ep_addr, count ? s->ep_buf : NULL, count); + return usbd_edpt_xfer(hwid, s->ep_addr, count ? s->ep_buf : NULL, count, false); #endif } return false; |