diff options
Diffstat (limited to 'src')
41 files changed, 613 insertions, 585 deletions
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 8f7f38589..076e1e1eb 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -64,6 +64,7 @@ function(add_tinyusb TARGET) -Wnull-dereference -Wuninitialized -Wunused + -Wunused-function -Wreturn-type -Wredundant-decls ) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index e5dbe988a..1a7ce7870 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -113,21 +113,21 @@ // EP IN software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_1; // No need for read mutex as only USB driver reads from FIFO #endif #endif // CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_2; // No need for read mutex as only USB driver reads from FIFO #endif #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_3; // No need for read mutex as only USB driver reads from FIFO #endif @@ -139,36 +139,36 @@ // - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into #if CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING) #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX]; #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // EP OUT software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_1; // No need for write mutex as only USB driver writes into FIFO #endif #endif // CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_2; // No need for write mutex as only USB driver writes into FIFO #endif #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_3; // No need for write mutex as only USB driver writes into FIFO #endif @@ -180,27 +180,27 @@ // - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into #if CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX]; #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // Control buffers -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; #if CFG_TUD_AUDIO > 1 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; #endif #if CFG_TUD_AUDIO > 2 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; #endif // Active alternate setting of interfaces @@ -217,7 +217,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; // Software encoding/decoding support FIFOs #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -225,7 +225,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -233,7 +233,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -243,7 +243,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -251,7 +251,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -259,7 +259,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -416,7 +416,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION audiod_function_t _audiod_fct[CFG_TUD_AUDIO]; +CFG_TUD_MEM_SECTION audiod_function_t _audiod_fct[CFG_TUD_AUDIO]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received); diff --git a/src/class/bth/bth_device.c b/src/class/bth/bth_device.c index f96bb3552..c5c74d26a 100755 --- a/src/class/bth/bth_device.c +++ b/src/class/bth/bth_device.c @@ -55,7 +55,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION btd_interface_t _btd_itf; +CFG_TUD_MEM_SECTION btd_interface_t _btd_itf; static bool bt_tx_data(uint8_t ep, void *data, uint16_t len) { diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 5adce521d..f658df4d0 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -76,7 +76,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION tu_static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; +CFG_TUD_MEM_SECTION tu_static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; static bool _prep_out_transaction (cdcd_interface_t* p_cdc) { diff --git a/src/class/dfu/dfu_device.c b/src/class/dfu/dfu_device.c index 464c4bd6b..bffdb8376 100644 --- a/src/class/dfu/dfu_device.c +++ b/src/class/dfu/dfu_device.c @@ -56,7 +56,7 @@ typedef struct } dfu_state_ctx_t; // Only a single dfu state is allowed -CFG_TUSB_MEM_SECTION tu_static dfu_state_ctx_t _dfu_ctx; +CFG_TUD_MEM_SECTION tu_static dfu_state_ctx_t _dfu_ctx; static void reset_state(void) { diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index 9240fe2ca..5637ea6b4 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -58,7 +58,7 @@ typedef struct tusb_hid_descriptor_hid_t const * hid_descriptor; } hidd_interface_t; -CFG_TUSB_MEM_SECTION tu_static hidd_interface_t _hidd_itf[CFG_TUD_HID]; +CFG_TUD_MEM_SECTION tu_static hidd_interface_t _hidd_itf[CFG_TUD_HID]; /*------------- Helpers -------------*/ static inline uint8_t get_index_by_itfnum(uint8_t itf_num) diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index e3e7826da..052372a93 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -82,7 +82,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION midid_interface_t _midid_itf[CFG_TUD_MIDI]; +CFG_TUD_MEM_SECTION midid_interface_t _midid_itf[CFG_TUD_MIDI]; bool tud_midi_n_mounted (uint8_t itf) { diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 159a11259..a602e9672 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -34,13 +34,16 @@ #include "msc_device.h" +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_MSC_LOG_LEVEL + #define CFG_TUD_MSC_LOG_LEVEL 2 +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_MSC_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ - -// Can be selectively disabled to reduce logging when troubleshooting other driver -#define MSC_DEBUG 2 - enum { MSC_STAGE_CMD = 0, @@ -71,8 +74,8 @@ typedef struct uint8_t add_sense_qualifier; }mscd_interface_t; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static mscd_interface_t _mscd_itf; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static mscd_interface_t _mscd_itf; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION @@ -164,7 +167,7 @@ uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { if ( block_count ) { - TU_LOG(MSC_DEBUG, " SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); + TU_LOG_DRV(" SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; }else { @@ -174,22 +177,22 @@ uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { if ( SCSI_CMD_READ_10 == cbw->command[0] && !is_data_in(cbw->dir) ) { - TU_LOG(MSC_DEBUG, " SCSI case 10 (Ho <> Di)\r\n"); + TU_LOG_DRV(" SCSI case 10 (Ho <> Di)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } else if ( SCSI_CMD_WRITE_10 == cbw->command[0] && is_data_in(cbw->dir) ) { - TU_LOG(MSC_DEBUG, " SCSI case 8 (Hi <> Do)\r\n"); + TU_LOG_DRV(" SCSI case 8 (Hi <> Do)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } else if ( 0 == block_count ) { - TU_LOG(MSC_DEBUG, " SCSI case 4 Hi > Dn (READ10) or case 9 Ho > Dn (WRITE10) \r\n"); + TU_LOG_DRV(" SCSI case 4 Hi > Dn (READ10) or case 9 Ho > Dn (WRITE10) \r\n"); status = MSC_CSW_STATUS_FAILED; } else if ( cbw->total_bytes / block_count == 0 ) { - TU_LOG(MSC_DEBUG, " Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); + TU_LOG_DRV(" Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } } @@ -352,7 +355,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t switch ( request->bRequest ) { case MSC_REQ_RESET: - TU_LOG(MSC_DEBUG, " MSC BOT Reset\r\n"); + TU_LOG_DRV(" MSC BOT Reset\r\n"); TU_VERIFY(request->wValue == 0 && request->wLength == 0); // driver state reset @@ -363,7 +366,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t case MSC_REQ_GET_MAX_LUN: { - TU_LOG(MSC_DEBUG, " MSC Get Max Lun\r\n"); + TU_LOG_DRV(" MSC Get Max Lun\r\n"); TU_VERIFY(request->wValue == 0 && request->wLength == 1); uint8_t maxlun = 1; @@ -400,7 +403,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ( !(xferred_bytes == sizeof(msc_cbw_t) && p_cbw->signature == MSC_CBW_SIGNATURE) ) { - TU_LOG(MSC_DEBUG, " SCSI CBW is not valid\r\n"); + TU_LOG_DRV(" SCSI CBW is not valid\r\n"); // BOT 6.6.1 If CBW is not valid stall both endpoints until reset recovery p_msc->stage = MSC_STAGE_NEED_RESET; @@ -412,7 +415,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t return false; } - TU_LOG(MSC_DEBUG, " SCSI Command [Lun%u]: %s\r\n", p_cbw->lun, tu_lookup_find(&_msc_scsi_cmd_table, p_cbw->command[0])); + TU_LOG_DRV(" SCSI Command [Lun%u]: %s\r\n", p_cbw->lun, tu_lookup_find(&_msc_scsi_cmd_table, p_cbw->command[0])); //TU_LOG_MEM(MSC_DEBUG, p_cbw, xferred_bytes, 2); p_csw->signature = MSC_CSW_SIGNATURE; @@ -457,7 +460,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t { if (p_cbw->total_bytes > sizeof(_mscd_buf)) { - TU_LOG(MSC_DEBUG, " SCSI reject non READ10/WRITE10 with large data\r\n"); + TU_LOG_DRV(" SCSI reject non READ10/WRITE10 with large data\r\n"); fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); }else { @@ -479,7 +482,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ( resplen < 0 ) { // unsupported command - TU_LOG(MSC_DEBUG, " SCSI unsupported or failed command\r\n"); + TU_LOG_DRV(" SCSI unsupported or failed command\r\n"); fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); } else if (resplen == 0) @@ -514,7 +517,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t break; case MSC_STAGE_DATA: - TU_LOG(MSC_DEBUG, " SCSI Data [Lun%u]\r\n", p_cbw->lun); + TU_LOG_DRV(" SCSI Data [Lun%u]\r\n", p_cbw->lun); //TU_LOG_MEM(MSC_DEBUG, _mscd_buf, xferred_bytes, 2); if (SCSI_CMD_READ_10 == p_cbw->command[0]) @@ -546,7 +549,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ( cb_result < 0 ) { // unsupported command - TU_LOG(MSC_DEBUG, " SCSI unsupported command\r\n"); + TU_LOG_DRV(" SCSI unsupported command\r\n"); fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); }else { @@ -575,7 +578,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // Wait for the Status phase to complete if( (ep_addr == p_msc->ep_in) && (xferred_bytes == sizeof(msc_csw_t)) ) { - TU_LOG(MSC_DEBUG, " SCSI Status [Lun%u] = %u\r\n", p_cbw->lun, p_csw->status); + TU_LOG_DRV(" SCSI Status [Lun%u] = %u\r\n", p_cbw->lun, p_csw->status); // TU_LOG_MEM(MSC_DEBUG, p_csw, xferred_bytes, 2); // Invoke complete callback if defined @@ -845,7 +848,7 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) if ( nbytes < 0 ) { // negative means error -> endpoint is stalled & status in CSW set to failed - TU_LOG(MSC_DEBUG, " tud_msc_read10_cb() return -1\r\n"); + TU_LOG_DRV(" tud_msc_read10_cb() return -1\r\n"); // set sense set_sense_medium_not_present(p_cbw->lun); @@ -907,7 +910,7 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 if ( nbytes < 0 ) { // negative means error -> failed this scsi op - TU_LOG(MSC_DEBUG, " tud_msc_write10_cb() return -1\r\n"); + TU_LOG_DRV(" tud_msc_write10_cb() return -1\r\n"); // update actual byte before failed p_msc->xferred_len += xferred_bytes; diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c index 8ac7cbd01..762425732 100644 --- a/src/class/net/ecm_rndis_device.c +++ b/src/class/net/ecm_rndis_device.c @@ -61,10 +61,10 @@ typedef struct #define CFG_TUD_NET_PACKET_PREFIX_LEN sizeof(rndis_data_packet_t) #define CFG_TUD_NET_PACKET_SUFFIX_LEN 0 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t received[CFG_TUD_NET_PACKET_PREFIX_LEN + CFG_TUD_NET_MTU + CFG_TUD_NET_PACKET_PREFIX_LEN]; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t transmitted[CFG_TUD_NET_PACKET_PREFIX_LEN + CFG_TUD_NET_MTU + CFG_TUD_NET_PACKET_PREFIX_LEN]; struct ecm_notify_struct @@ -94,8 +94,8 @@ tu_static const struct ecm_notify_struct ecm_notify_csc = .uplink = 9728000, }; -// TODO remove CFG_TUSB_MEM_SECTION, control internal buffer is already in this special section -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union +// TODO remove CFG_TUD_MEM_SECTION, control internal buffer is already in this special section +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union { uint8_t rndis_buf[120]; struct ecm_notify_struct ecm_buf; @@ -104,8 +104,8 @@ CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -// TODO remove CFG_TUSB_MEM_SECTION -CFG_TUSB_MEM_SECTION tu_static netd_interface_t _netd_itf; +// TODO remove CFG_TUD_MEM_SECTION +CFG_TUD_MEM_SECTION tu_static netd_interface_t _netd_itf; tu_static bool can_xmit; diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 9e9580249..611dc3348 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -130,7 +130,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { .wLength = sizeof(ntb_parameters_t), .bmNtbFormatsSupported = 0x01, .dwNtbInMaxSize = CFG_TUD_NCM_IN_NTB_MAX_SIZE, @@ -145,9 +145,9 @@ CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_par .wNtbOutMaxDatagrams = 0 }; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static transmit_ntb_t transmit_ntb[2]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static transmit_ntb_t transmit_ntb[2]; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t receive_ntb[CFG_TUD_NCM_OUT_NTB_MAX_SIZE]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t receive_ntb[CFG_TUD_NCM_OUT_NTB_MAX_SIZE]; tu_static ncm_interface_t ncm_interface; diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 4e320a778..573654d58 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -143,7 +143,7 @@ typedef struct usbtmc_capabilities_specific_t const * capabilities; } usbtmc_interface_state_t; -CFG_TUSB_MEM_SECTION tu_static usbtmc_interface_state_t usbtmc_state = +CFG_TUD_MEM_SECTION tu_static usbtmc_interface_state_t usbtmc_state = { .itf_id = 0xFF, }; diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index 93596ee33..389a29696 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -59,7 +59,7 @@ typedef struct CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_VENDOR_EPSIZE]; } vendord_interface_t; -CFG_TUSB_MEM_SECTION tu_static vendord_interface_t _vendord_itf[CFG_TUD_VENDOR]; +CFG_TUD_MEM_SECTION tu_static vendord_interface_t _vendord_itf[CFG_TUD_VENDOR]; #define ITF_MEM_RESET_SIZE offsetof(vendord_interface_t, rx_ff) diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 91f452afc..e6fadf41b 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -130,8 +130,8 @@ typedef struct TU_ATTR_PACKED { //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION tu_static videod_interface_t _videod_itf[CFG_TUD_VIDEO]; -CFG_TUSB_MEM_SECTION tu_static videod_streaming_interface_t _videod_streaming_itf[CFG_TUD_VIDEO_STREAMING]; +CFG_TUD_MEM_SECTION tu_static videod_interface_t _videod_itf[CFG_TUD_VIDEO]; +CFG_TUD_MEM_SECTION tu_static videod_streaming_interface_t _videod_streaming_itf[CFG_TUD_VIDEO_STREAMING]; tu_static uint8_t const _cap_get = 0x1u; /* support for GET */ tu_static uint8_t const _cap_get_set = 0x3u; /* support for GET and SET */ diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 576cb123f..25f85e501 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -53,6 +53,8 @@ #define U32_TO_U8S_LE(_u32) TU_U32_BYTE0(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE3(_u32) #define TU_BIT(n) (1UL << (n)) + +// Generate a mask with bit from high (31) to low (0) set, e.g TU_GENMASK(3, 0) = 0b1111 #define TU_GENMASK(h, l) ( (UINT32_MAX << (l)) & (UINT32_MAX >> (31 - (h))) ) //--------------------------------------------------------------------+ @@ -99,10 +101,9 @@ TU_ATTR_WEAK extern void* tusb_app_phys_to_virt(void *phys_addr); #define tu_varclr(_var) tu_memclr(_var, sizeof(*(_var))) // This is a backport of memset_s from c11 -TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, int ch, size_t count) -{ +TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, int ch, size_t count) { // TODO may check if desst and src is not NULL - if (count > destsz) { + if ( count > destsz ) { return -1; } memset(dest, ch, count); @@ -110,10 +111,9 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i } // This is a backport of memcpy_s from c11 -TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, const void * src, size_t count ) -{ +TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, const void *src, size_t count) { // TODO may check if desst and src is not NULL - if (count > destsz) { + if ( count > destsz ) { return -1; } memcpy(dest, src, count); @@ -169,6 +169,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align32 (uint32_t value) { retur TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align4k (uint32_t value) { return (value & 0xFFFFF000UL); } TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_offset4k(uint32_t value) { return (value & 0xFFFUL); } +TU_ATTR_ALWAYS_INLINE static inline bool tu_is_aligned32(uint32_t value) { return (value & 0x1FUL) == 0; } +TU_ATTR_ALWAYS_INLINE static inline bool tu_is_aligned64(uint64_t value) { return (value & 0x3FUL) == 0; } + //------------- Mathematics -------------// TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_div_ceil(uint32_t v, uint32_t d) { return (v + d -1)/d; } diff --git a/src/device/usbd.c b/src/device/usbd.c index 44c2530ce..9429cf664 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -43,9 +43,6 @@ #define CFG_TUD_TASK_QUEUE_SZ 16 #endif -// Debug level of USBD -#define USBD_DBG 2 - //--------------------------------------------------------------------+ // Device Data //--------------------------------------------------------------------+ @@ -81,7 +78,7 @@ tu_static usbd_device_t _usbd_dev; //--------------------------------------------------------------------+ // Class Driver //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL #define DRIVER_NAME(_name) .name = _name, #else #define DRIVER_NAME(_name) @@ -308,7 +305,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t event, //--------------------------------------------------------------------+ // Debug //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL tu_static char const* const _usbd_event_str[DCD_EVENT_COUNT] = { "Invalid" , @@ -330,7 +327,7 @@ void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback) usbd_class_driver_t const * driver = get_driver(i); if ( driver && driver->control_xfer_cb == callback ) { - TU_LOG(USBD_DBG, " %s control complete\r\n", driver->name); + TU_LOG_USBD(" %s control complete\r\n", driver->name); return; } } @@ -396,10 +393,10 @@ bool tud_init (uint8_t rhport) // skip if already initialized if ( tud_inited() ) return true; - TU_LOG(USBD_DBG, "USBD init on controller %u\r\n", rhport); - TU_LOG_INT(USBD_DBG, sizeof(usbd_device_t)); - TU_LOG_INT(USBD_DBG, sizeof(tu_fifo_t)); - TU_LOG_INT(USBD_DBG, sizeof(tu_edpt_stream_t)); + TU_LOG_USBD("USBD init on controller %u\r\n", rhport); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(usbd_device_t)); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_fifo_t)); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_edpt_stream_t)); tu_varclr(&_usbd_dev); @@ -424,7 +421,7 @@ bool tud_init (uint8_t rhport) { usbd_class_driver_t const * driver = get_driver(i); TU_ASSERT(driver); - TU_LOG(USBD_DBG, "%s init\r\n", driver->name); + TU_LOG_USBD("%s init\r\n", driver->name); driver->init(); } @@ -496,21 +493,21 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) dcd_event_t event; if ( !osal_queue_receive(_usbd_q, &event, timeout_ms) ) return; -#if CFG_TUSB_DEBUG >= 2 - if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG(USBD_DBG, "\r\n"); // extra line for setup - TU_LOG(USBD_DBG, "USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED"); +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL + if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG_USBD("\r\n"); // extra line for setup + TU_LOG_USBD("USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED"); #endif switch ( event.event_id ) { case DCD_EVENT_BUS_RESET: - TU_LOG(USBD_DBG, ": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]); + TU_LOG_USBD(": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]); usbd_reset(event.rhport); _usbd_dev.speed = event.bus_reset.speed; break; case DCD_EVENT_UNPLUGGED: - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD("\r\n"); usbd_reset(event.rhport); // invoke callback @@ -518,8 +515,8 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) break; case DCD_EVENT_SETUP_RECEIVED: - TU_LOG_PTR(USBD_DBG, &event.setup_received); - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_PTR(CFG_TUD_LOG_LEVEL, &event.setup_received); + TU_LOG_USBD("\r\n"); // Mark as connected after receiving 1st setup packet. // But it is easier to set it every time instead of wasting time to check then set @@ -534,7 +531,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) // Process control request if ( !process_control_request(event.rhport, &event.setup_received) ) { - TU_LOG(USBD_DBG, " Stall EP0\r\n"); + TU_LOG_USBD(" Stall EP0\r\n"); // Failed -> stall both control endpoint IN and OUT dcd_edpt_stall(event.rhport, 0); dcd_edpt_stall(event.rhport, 0 | TUSB_DIR_IN_MASK); @@ -548,7 +545,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const ep_dir = tu_edpt_dir(ep_addr); - TU_LOG(USBD_DBG, "on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len); + TU_LOG_USBD("on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len); _usbd_dev.ep_status[epnum][ep_dir].busy = 0; _usbd_dev.ep_status[epnum][ep_dir].claimed = 0; @@ -563,7 +560,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) usbd_class_driver_t const * driver = get_driver( _usbd_dev.ep2drv[epnum][ep_dir] ); TU_ASSERT(driver, ); - TU_LOG(USBD_DBG, " %s xfer callback\r\n", driver->name); + TU_LOG_USBD(" %s xfer callback\r\n", driver->name); driver->xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); } } @@ -575,27 +572,27 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) // e.g suspend -> resume -> unplug/plug. Skip suspend/resume if not connected if ( _usbd_dev.connected ) { - TU_LOG(USBD_DBG, ": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en); + TU_LOG_USBD(": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en); if (tud_suspend_cb) tud_suspend_cb(_usbd_dev.remote_wakeup_en); }else { - TU_LOG(USBD_DBG, " Skipped\r\n"); + TU_LOG_USBD(" Skipped\r\n"); } break; case DCD_EVENT_RESUME: if ( _usbd_dev.connected ) { - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD("\r\n"); if (tud_resume_cb) tud_resume_cb(); }else { - TU_LOG(USBD_DBG, " Skipped\r\n"); + TU_LOG_USBD(" Skipped\r\n"); } break; case USBD_EVENT_FUNC_CALL: - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD("\r\n"); if ( event.func_call.func ) event.func_call.func(event.func_call.param); break; @@ -620,7 +617,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) static bool invoke_class_control(uint8_t rhport, usbd_class_driver_t const * driver, tusb_control_request_t const * request) { usbd_control_set_complete_callback(driver->control_xfer_cb); - TU_LOG(USBD_DBG, " %s control request\r\n", driver->name); + TU_LOG_USBD(" %s control request\r\n", driver->name); return driver->control_xfer_cb(rhport, CONTROL_STAGE_SETUP, request); } @@ -641,11 +638,11 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const return tud_vendor_control_xfer_cb(rhport, CONTROL_STAGE_SETUP, p_request); } -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL if (TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type && p_request->bRequest <= TUSB_REQ_SYNCH_FRAME) { - TU_LOG(USBD_DBG, " %s", tu_str_std_request[p_request->bRequest]); - if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD(" %s", tu_str_std_request[p_request->bRequest]); + if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG_USBD("\r\n"); } #endif @@ -701,7 +698,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const if ( _usbd_dev.cfg_num ) { // already configured: need to clear all endpoints and driver first - TU_LOG(USBD_DBG, " Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num); + TU_LOG_USBD(" Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num); // close all non-control endpoints, cancel all pending transfers if any dcd_edpt_close_all(rhport); @@ -730,7 +727,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // Only support remote wakeup for device feature TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); - TU_LOG(USBD_DBG, " Enable Remote Wakeup\r\n"); + TU_LOG_USBD(" Enable Remote Wakeup\r\n"); // Host may enable remote wake up before suspending especially HID device _usbd_dev.remote_wakeup_en = true; @@ -741,7 +738,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // Only support remote wakeup for device feature TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); - TU_LOG(USBD_DBG, " Disable Remote Wakeup\r\n"); + TU_LOG_USBD(" Disable Remote Wakeup\r\n"); // Host may disable remote wake up after resuming _usbd_dev.remote_wakeup_en = false; @@ -924,7 +921,7 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) if ( (sizeof(tusb_desc_interface_t) <= drv_len) && (drv_len <= remaining_len) ) { // Open successfully - TU_LOG(USBD_DBG, " %s opened\r\n", driver->name); + TU_LOG_USBD(" %s opened\r\n", driver->name); // Some drivers use 2 or more interfaces but may not have IAD e.g MIDI (always) or // BTH (even CDC) with class in device descriptor (single interface) @@ -983,7 +980,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const { case TUSB_DESC_DEVICE: { - TU_LOG(USBD_DBG, " Device\r\n"); + TU_LOG_USBD(" Device\r\n"); void* desc_device = (void*) (uintptr_t) tud_descriptor_device_cb(); @@ -1007,7 +1004,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const case TUSB_DESC_BOS: { - TU_LOG(USBD_DBG, " BOS\r\n"); + TU_LOG_USBD(" BOS\r\n"); // requested by host if USB > 2.0 ( i.e 2.1 or 3.x ) if (!tud_descriptor_bos_cb) return false; @@ -1029,12 +1026,12 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const if ( desc_type == TUSB_DESC_CONFIGURATION ) { - TU_LOG(USBD_DBG, " Configuration[%u]\r\n", desc_index); + TU_LOG_USBD(" Configuration[%u]\r\n", desc_index); desc_config = (uintptr_t) tud_descriptor_configuration_cb(desc_index); }else { // Host only request this after getting Device Qualifier descriptor - TU_LOG(USBD_DBG, " Other Speed Configuration\r\n"); + TU_LOG_USBD(" Other Speed Configuration\r\n"); TU_VERIFY( tud_descriptor_other_speed_configuration_cb ); desc_config = (uintptr_t) tud_descriptor_other_speed_configuration_cb(desc_index); } @@ -1050,7 +1047,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const case TUSB_DESC_STRING: { - TU_LOG(USBD_DBG, " String[%u]\r\n", desc_index); + TU_LOG_USBD(" String[%u]\r\n", desc_index); // String Descriptor always uses the desc set from user uint8_t const* desc_str = (uint8_t const*) tud_descriptor_string_cb(desc_index, tu_le16toh(p_request->wIndex)); @@ -1063,7 +1060,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const case TUSB_DESC_DEVICE_QUALIFIER: { - TU_LOG(USBD_DBG, " Device Qualifier\r\n"); + TU_LOG_USBD(" Device Qualifier\r\n"); TU_VERIFY( tud_descriptor_device_qualifier_cb ); @@ -1248,7 +1245,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // TODO skip ready() check for now since enumeration also use this API // TU_VERIFY(tud_ready()); - TU_LOG(USBD_DBG, " Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes); + TU_LOG_USBD(" Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes); // Attempt to transfer on a busy endpoint, sound like an race condition ! TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0); @@ -1265,7 +1262,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // DCD error, mark endpoint as ready to allow next transfer _usbd_dev.ep_status[epnum][dir].busy = 0; _usbd_dev.ep_status[epnum][dir].claimed = 0; - TU_LOG(USBD_DBG, "FAILED\r\n"); + TU_LOG_USBD("FAILED\r\n"); TU_BREAKPOINT(); return false; } @@ -1282,7 +1279,7 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - TU_LOG(USBD_DBG, " Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes); + TU_LOG_USBD(" Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes); // Attempt to transfer on a busy endpoint, sound like an race condition ! TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0); @@ -1293,14 +1290,14 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes)) { - TU_LOG(USBD_DBG, "OK\r\n"); + TU_LOG_USBD("OK\r\n"); return true; }else { // DCD error, mark endpoint as ready to allow next transfer _usbd_dev.ep_status[epnum][dir].busy = 0; _usbd_dev.ep_status[epnum][dir].claimed = 0; - TU_LOG(USBD_DBG, "failed\r\n"); + TU_LOG_USBD("failed\r\n"); TU_BREAKPOINT(); return false; } @@ -1326,7 +1323,7 @@ void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr) // only stalled if currently cleared if ( !_usbd_dev.ep_status[epnum][dir].stalled ) { - TU_LOG(USBD_DBG, " Stall EP %02X\r\n", ep_addr); + TU_LOG_USBD(" Stall EP %02X\r\n", ep_addr); dcd_edpt_stall(rhport, ep_addr); _usbd_dev.ep_status[epnum][dir].stalled = 1; _usbd_dev.ep_status[epnum][dir].busy = 1; @@ -1343,7 +1340,7 @@ void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) // only clear if currently stalled if ( _usbd_dev.ep_status[epnum][dir].stalled ) { - TU_LOG(USBD_DBG, " Clear Stall EP %02X\r\n", ep_addr); + TU_LOG_USBD(" Clear Stall EP %02X\r\n", ep_addr); dcd_edpt_clear_stall(rhport, ep_addr); _usbd_dev.ep_status[epnum][dir].stalled = 0; _usbd_dev.ep_status[epnum][dir].busy = 0; @@ -1371,7 +1368,7 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) rhport = _usbd_rhport; TU_ASSERT(dcd_edpt_close, /**/); - TU_LOG(USBD_DBG, " CLOSING Endpoint: 0x%02X\r\n", ep_addr); + TU_LOG_USBD(" CLOSING Endpoint: 0x%02X\r\n", ep_addr); uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index 2afe967b5..76d062e40 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -32,10 +32,7 @@ #include "tusb.h" #include "device/usbd_pvt.h" -// Debug level of USBD Control -#define USBD_CONTROL_DEBUG 2 - -#if CFG_TUSB_DEBUG >= USBD_CONTROL_DEBUG +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL extern void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); #endif @@ -58,7 +55,7 @@ typedef struct tu_static usbd_control_xfer_t _ctrl_xfer; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE]; //--------------------------------------------------------------------+ @@ -191,7 +188,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result { TU_VERIFY(_ctrl_xfer.buffer); memcpy(_ctrl_xfer.buffer, _usbd_ctrl_buf, xferred_bytes); - TU_LOG_MEM(USBD_CONTROL_DEBUG, _usbd_ctrl_buf, xferred_bytes, 2); + TU_LOG_MEM(CFG_TUD_LOG_LEVEL, _usbd_ctrl_buf, xferred_bytes, 2); } _ctrl_xfer.total_xferred += (uint16_t) xferred_bytes; @@ -208,7 +205,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result // callback can still stall control in status phase e.g out data does not make sense if ( _ctrl_xfer.complete_cb ) { - #if CFG_TUSB_DEBUG >= USBD_CONTROL_DEBUG + #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL usbd_driver_print_control_complete_name(_ctrl_xfer.complete_cb); #endif diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 8393d3469..940b2858b 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -33,13 +33,20 @@ extern "C" { #endif +// Level where CFG_TUSB_DEBUG must be at least for USBD is logged +#ifndef CFG_TUD_LOG_LEVEL +#define CFG_TUD_LOG_LEVEL 2 +#endif + +#define TU_LOG_USBD(...) TU_LOG(CFG_TUD_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // Class Driver API //--------------------------------------------------------------------+ typedef struct { - #if CFG_TUSB_DEBUG >= 2 + #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL char const* name; #endif diff --git a/src/host/hcd.h b/src/host/hcd.h index 3355c18b2..d77dd6e2f 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -110,15 +110,15 @@ typedef struct // clean/flush data cache: write cache -> memory. // Required before an DMA TX transfer to make sure data is in memory -void hcd_dcache_clean(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_clean(void const* addr, uint32_t data_size) TU_ATTR_WEAK; // invalidate data cache: mark cache as invalid, next read will read from memory // Required BOTH before and after an DMA RX transfer -void hcd_dcache_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; // clean and invalidate data cache // Required before an DMA transfer where memory is both read/write by DMA -void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; //--------------------------------------------------------------------+ // Controller API @@ -171,11 +171,15 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); +// Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); + // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr); +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); //--------------------------------------------------------------------+ // USBH implemented API diff --git a/src/host/hub.c b/src/host/hub.c index 182bd6ce8..16dd534d2 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -45,8 +45,8 @@ typedef struct uint8_t itf_num; uint8_t ep_in; uint8_t port_count; - uint8_t status_change; // data from status change interrupt endpoint + CFG_TUH_MEM_ALIGN uint8_t status_change; CFG_TUH_MEM_ALIGN hub_port_status_response_t port_status; CFG_TUH_MEM_ALIGN hub_status_response_t hub_status; } hub_interface_t; diff --git a/src/host/usbh.c b/src/host/usbh.c index 1418cfb79..c8eb91be3 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -38,17 +38,19 @@ //--------------------------------------------------------------------+ #ifndef CFG_TUH_TASK_QUEUE_SZ -#define CFG_TUH_TASK_QUEUE_SZ 16 + #define CFG_TUH_TASK_QUEUE_SZ 16 #endif #ifndef CFG_TUH_INTERFACE_MAX -#define CFG_TUH_INTERFACE_MAX 8 + #define CFG_TUH_INTERFACE_MAX 8 #endif -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define USBH_DEBUG 2 +// Level where CFG_TUSB_DEBUG must be at least for USBH is logged +#ifndef CFG_TUH_LOG_LEVEL + #define CFG_TUH_LOG_LEVEL 2 +#endif -#define TU_LOG_USBH(...) TU_LOG(USBH_DEBUG, __VA_ARGS__) +#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // USBH-HCD common data structure @@ -322,12 +324,12 @@ bool tuh_init(uint8_t controller_id) if ( tuh_inited() ) return true; TU_LOG_USBH("USBH init on controller %u\r\n", controller_id); - TU_LOG_INT(USBH_DEBUG, sizeof(usbh_device_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(hcd_event_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(_ctrl_xfer)); - TU_LOG_INT(USBH_DEBUG, sizeof(tuh_xfer_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(tu_fifo_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(tu_edpt_stream_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(usbh_device_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(hcd_event_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(_ctrl_xfer)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tuh_xfer_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tu_fifo_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tu_edpt_stream_t)); // Event queue _usbh_q = osal_queue_create( &_usbh_qdef ); @@ -450,39 +452,28 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) TU_LOG_USBH("on EP %02X with %u bytes: %s\r\n", ep_addr, (unsigned int) event.xfer_complete.len, tu_str_xfer_result[event.xfer_complete.result]); - if (event.dev_addr == 0) - { + if (event.dev_addr == 0) { // device 0 only has control endpoint TU_ASSERT(epnum == 0, ); usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); - } - else - { + } else { usbh_device_t* dev = get_device(event.dev_addr); TU_VERIFY(dev && dev->connected, ); dev->ep_status[epnum][ep_dir].busy = 0; dev->ep_status[epnum][ep_dir].claimed = 0; - if ( 0 == epnum ) - { - usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); - }else - { - uint8_t drv_id = dev->ep2drv[epnum][ep_dir]; - if(drv_id < USBH_CLASS_DRIVER_COUNT) - { - TU_LOG_USBH("%s xfer callback\r\n", usbh_class_drivers[drv_id].name); - usbh_class_drivers[drv_id].xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); - } - else - { -#if CFG_TUH_API_EDPT_XFER - tuh_xfer_cb_t complete_cb = dev->ep_callback[epnum][ep_dir].complete_cb; - if ( complete_cb ) - { - tuh_xfer_t xfer = - { + if ( 0 == epnum ) { + usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, + event.xfer_complete.len); + }else { + // Prefer application callback over built-in one if available. This occurs when tuh_edpt_xfer() is used + // with enabled driver e.g HID endpoint + #if CFG_TUH_API_EDPT_XFER + tuh_xfer_cb_t const complete_cb = dev->ep_callback[epnum][ep_dir].complete_cb; + if ( complete_cb ) { + // re-construct xfer info + tuh_xfer_t xfer = { .daddr = event.dev_addr, .ep_addr = ep_addr, .result = event.xfer_complete.result, @@ -491,16 +482,21 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) .buffer = NULL, // not available .complete_cb = complete_cb, .user_data = dev->ep_callback[epnum][ep_dir].user_data - }; + }; - complete_cb(&xfer); - }else -#endif - { + complete_cb(&xfer); + }else + #endif + { + uint8_t const drv_id = dev->ep2drv[epnum][ep_dir]; + if ( drv_id < USBH_CLASS_DRIVER_COUNT ) { + TU_LOG_USBH("%s xfer callback\r\n", usbh_class_drivers[drv_id].name); + usbh_class_drivers[drv_id].xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, + event.xfer_complete.len); + } else { // no driver/callback responsible for this transfer - TU_ASSERT(false, ); + TU_ASSERT(false,); } - } } } @@ -565,7 +561,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) TU_LOG_USBH("[%u:%u] %s: ", rhport, daddr, (xfer->setup->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && xfer->setup->bRequest <= TUSB_REQ_SYNCH_FRAME) ? tu_str_std_request[xfer->setup->bRequest] : "Class Request"); - TU_LOG_PTR(USBH_DEBUG, xfer->setup); + TU_LOG_PTR(CFG_TUH_LOG_LEVEL, xfer->setup); TU_LOG_USBH("\r\n"); if (xfer->complete_cb) @@ -671,7 +667,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result if (request->wLength) { TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, dev_addr); - TU_LOG_MEM(USBH_DEBUG, _ctrl_xfer.buffer, xferred_bytes, 2); + TU_LOG_MEM(CFG_TUH_LOG_LEVEL, _ctrl_xfer.buffer, xferred_bytes, 2); } _ctrl_xfer.actual_len = (uint16_t) xferred_bytes; @@ -714,6 +710,25 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer) return true; } +bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { + usbh_device_t* dev = get_device(daddr); + TU_VERIFY(dev); + + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + // skip if not busy + TU_VERIFY(dev->ep_status[epnum][dir].busy); + + bool const ret = hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); + if (ret) { + // mark as ready if transfer is aborted + dev->ep_status[epnum][dir].busy = false; + } + + return ret; +} + //--------------------------------------------------------------------+ // USBH API For Class Driver //--------------------------------------------------------------------+ @@ -745,7 +760,7 @@ void usbh_int_set(bool enabled) // Endpoint API //--------------------------------------------------------------------+ -// TODO has some duplication code with device, refactor later +// Claim an endpoint for transfer bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) { // Note: addr0 only use tuh_control_xfer @@ -761,7 +776,7 @@ bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) return true; } -// TODO has some duplication code with device, refactor later +// Release an claimed endpoint due to failed transfer attempt bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) { // Note: addr0 only use tuh_control_xfer @@ -777,7 +792,7 @@ bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) return true; } -// TODO has some duplication code with device, refactor later +// Submit an transfer bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { @@ -844,14 +859,13 @@ bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep) return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, desc_ep); } -bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - +bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { usbh_device_t* dev = get_device(dev_addr); TU_VERIFY(dev); + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + return dev->ep_status[epnum][dir].busy; } @@ -1186,7 +1200,7 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu TU_LOG_USBH("Device unplugged address = %u\r\n", daddr); if (is_hub_addr(daddr)) { - TU_LOG(USBH_DEBUG, " is a HUB device %u\r\n", daddr); + TU_LOG(CFG_TUH_LOG_LEVEL, " is a HUB device %u\r\n", daddr); // Submit removed event If the device itself is a hub (un-rolled recursive) // TODO a better to unroll recursrive is using array of removing_hubs and mark it here @@ -1657,7 +1671,7 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur if( drv_id >= USBH_CLASS_DRIVER_COUNT ) { - TU_LOG(USBH_DEBUG, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", + TU_LOG(CFG_TUH_LOG_LEVEL, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); } } @@ -1695,7 +1709,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) if (is_hub_addr(dev_addr)) { - TU_LOG(USBH_DEBUG, "HUB address = %u is mounted\r\n", dev_addr); + TU_LOG(CFG_TUH_LOG_LEVEL, "HUB address = %u is mounted\r\n", dev_addr); }else { // Invoke callback if available diff --git a/src/host/usbh.h b/src/host/usbh.h index 0f969a46a..0d56f40c9 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -172,8 +172,12 @@ bool tuh_control_xfer(tuh_xfer_t* xfer); // - sync : blocking if complete callback is NULL. bool tuh_edpt_xfer(tuh_xfer_t* xfer); -// Open an non-control endpoint -bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep); +// Open a non-control endpoint +bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); + +// Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort +bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); // Set Configuration (control transfer) // config_num = 0 will un-configure device. Note: config_num = config_descriptor_index + 1 diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 95dfda49c..f02415904 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -51,7 +51,7 @@ extern int8_t board_ft9xx_vbus(void); extern int board_uart_write(void const *buf, int len); // Static array to store an incoming SETUP request for processing by tinyusb. -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t _ft9xx_setup_packet[8]; struct ft9xx_xfer_state diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 37265df8b..9327e09d8 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -116,7 +116,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index c14f00431..c59c107ff 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -68,25 +68,34 @@ TU_ATTR_ALWAYS_INLINE static inline bool imxrt_is_cache_mem(uintptr_t addr) { return !(0x20000000 <= addr && addr < 0x20100000); } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_clean(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { + TU_ASSERT(tu_is_aligned32(addr32)); SCB_CleanDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); } + return true; } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_invalidate(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { + // Invalidating does not push cached changes back to RAM so we need to be + // *very* careful when we do it. If we're not aligned, then we risk resetting + // values back to their RAM state. + TU_ASSERT(tu_is_aligned32(addr32)); SCB_InvalidateDCache_by_Addr((void*) addr32, (int32_t) data_size); } + return true; } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_clean_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean_invalidate(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { + TU_ASSERT(tu_is_aligned32(addr32)); SCB_CleanInvalidateDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); } + return true; } #endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index f50550d33..f9ec666e5 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -175,7 +175,7 @@ typedef struct { dcd_qtd_t qtd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(32); }dcd_data_t; -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048) +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(2048) static dcd_data_t _dcd_data; //--------------------------------------------------------------------+ diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 56167b8f6..6ee91e18e 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -41,16 +41,16 @@ #if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX #include "ci_hs_imxrt.h" - void hcd_dcache_clean(void const* addr, uint32_t data_size) { - imxrt_dcache_clean(addr, data_size); + bool hcd_dcache_clean(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean(addr, data_size); } - void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { - imxrt_dcache_invalidate(addr, data_size); + bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_invalidate(addr, data_size); } - void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - imxrt_dcache_clean_invalidate(addr, data_size); + bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean_invalidate(addr, data_size); } #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 38711e382..9be24c888 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -48,8 +48,8 @@ #ifdef TUP_USBIP_CHIPIDEA_HS // NXP Transdimension: 8 elements #define FRAMELIST_SIZE_BIT_VALUE 7u - #define FRAMELIST_SIZE_USBCMD_VALUE (((FRAMELIST_SIZE_BIT_VALUE & 3) << EHCI_USBCMD_POS_FRAMELIST_SIZE) | \ - ((FRAMELIST_SIZE_BIT_VALUE >> 2) << EHCI_USBCMD_POS_NXP_FRAMELIST_SIZE_MSB)) + #define FRAMELIST_SIZE_USBCMD_VALUE (((FRAMELIST_SIZE_BIT_VALUE & 3) << EHCI_USBCMD_FRAMELIST_SIZE_SHIFT) | \ + ((FRAMELIST_SIZE_BIT_VALUE >> 2) << EHCI_USBCMD_CHIPIDEA_FRAMELIST_SIZE_MSB_SHIFT)) #else // STD EHCI: 256 elements #define FRAMELIST_SIZE_BIT_VALUE 2u @@ -126,52 +126,50 @@ static inline void print_intr(uint32_t intr) { //--------------------------------------------------------------------+ // PROTOTYPE //--------------------------------------------------------------------+ -static inline ehci_link_t* get_period_head(uint8_t rhport, uint32_t interval_ms) -{ - (void) rhport; - return (ehci_link_t*) &ehci_data.period_head_arr[ tu_log2( tu_min32(FRAMELIST_SIZE, interval_ms) ) ]; -} -static inline ehci_qhd_t* qhd_control(uint8_t dev_addr) -{ - return &ehci_data.control[dev_addr].qhd; -} +// weak dcache for non-cacheable MCU +TU_ATTR_WEAK bool hcd_dcache_clean(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; return true; } +TU_ATTR_WEAK bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; return true; } +TU_ATTR_WEAK bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; return true; } -static inline ehci_qhd_t* qhd_async_head(uint8_t rhport) -{ - (void) rhport; - // control qhd of dev0 is used as async head - return qhd_control(0); -} - -static inline ehci_qtd_t* qtd_control(uint8_t dev_addr) -{ - return &ehci_data.control[dev_addr].qtd; -} - - -static inline ehci_qhd_t* qhd_next (ehci_qhd_t const * p_qhd); -static inline ehci_qhd_t* qhd_find_free (void); -static inline ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_next (ehci_qhd_t const * p_qhd); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_find_free (void); +static ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr); static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd); +static void qhd_remove_qtd(ehci_qhd_t *qhd); -static inline ehci_qtd_t* qtd_find_free (void); +TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr); +TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_find_free (void); static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes); -static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); -static inline ehci_link_t* list_next (ehci_link_t const *p_link); +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport); +TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next (ehci_link_t const *p_link); +static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr); -TU_ATTR_WEAK void hcd_dcache_clean(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; -} - -TU_ATTR_WEAK void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; +static void ehci_disable_schedule(ehci_registers_t* regs, bool is_period) { + // maybe have a timeout for status + if (is_period) { + regs->command_bm.periodic_enable = 0; + while(regs->status_bm.periodic_status) {} + } else { + regs->command_bm.async_enable = 0; + while(regs->status_bm.async_status) {} // should have a timeout + } } -TU_ATTR_WEAK void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; +static void ehci_enable_schedule(ehci_registers_t* regs, bool is_period) { + // maybe have a timeout for status + if (is_period) { + regs->command_bm.periodic_enable = 1; + while ( 0 == regs->status_bm.periodic_status ) {} + } else { + regs->command_bm.async_enable = 1; + while( 0 == regs->status_bm.async_status ) {} + } } //--------------------------------------------------------------------+ @@ -228,43 +226,6 @@ tusb_speed_t hcd_port_speed_get(uint8_t rhport) return (tusb_speed_t) ehci_data.regs->portsc_bm.nxp_port_speed; // NXP specific port speed } -static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) { - ehci_link_t* prev = list_head; - - while (prev && !prev->terminate) { - ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev); - - // done if loop back to head - if ( (uintptr_t) qhd == (uintptr_t) list_head) { - break; - } - - if ( qhd->dev_addr == dev_addr ) { - // TODO deactivate all TD, wait for QHD to inactive before removal - prev->address = qhd->next.address; - - // EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller) - qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1); - - if ( qhd->int_smask ) - { - // period list queue element is guarantee to be free in the next frame (1 ms) - qhd->used = 0; - }else - { - // async list use async advance handshake - // mark as removing, will completely re-usable when async advance isr occurs - qhd->removing = 1; - } - - hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); - hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); - }else { - prev = list_next(prev); - } - } -} - // Close all opened endpoint belong to this device void hcd_device_close(uint8_t rhport, uint8_t daddr) { @@ -274,7 +235,7 @@ void hcd_device_close(uint8_t rhport, uint8_t daddr) } // Remove from async list - list_remove_qhd_by_daddr((ehci_link_t *) qhd_async_head(rhport), daddr); + list_remove_qhd_by_daddr((ehci_link_t *) list_get_async_head(rhport), daddr); // Remove from all interval period list for(uint8_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++) { @@ -286,37 +247,42 @@ void hcd_device_close(uint8_t rhport, uint8_t daddr) } static void init_periodic_list(uint8_t rhport) { + (void) rhport; + // Build the polling interval tree with 1 ms, 2 ms, 4 ms and 8 ms (framesize) only for ( uint32_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++ ) { ehci_data.period_head_arr[i].int_smask = 1; // queue head in period list must have smask non-zero ehci_data.period_head_arr[i].qtd_overlay.halted = 1; // dummy node, always inactive } - ehci_link_t * const framelist = ehci_data.period_framelist; - ehci_link_t * const period_1ms = get_period_head(rhport, 1u); - + // TODO EHCI_FRAMELIST_SIZE with other size than 8 // all links --> period_head_arr[0] (1ms) // 0, 2, 4, 6 etc --> period_head_arr[1] (2ms) // 1, 5 --> period_head_arr[2] (4ms) // 3 --> period_head_arr[3] (8ms) - // TODO EHCI_FRAMELIST_SIZE with other size than 8 + ehci_link_t * const framelist = ehci_data.period_framelist; + ehci_link_t * const head_1ms = (ehci_link_t *) &ehci_data.period_head_arr[0]; + ehci_link_t * const head_2ms = (ehci_link_t *) &ehci_data.period_head_arr[1]; + ehci_link_t * const head_4ms = (ehci_link_t *) &ehci_data.period_head_arr[2]; + ehci_link_t * const head_8ms = (ehci_link_t *) &ehci_data.period_head_arr[3]; + for (uint32_t i = 0; i < FRAMELIST_SIZE; i++) { - framelist[i].address = (uint32_t) period_1ms; + framelist[i].address = (uint32_t) head_1ms; framelist[i].type = EHCI_QTYPE_QHD; } for (uint32_t i = 0; i < FRAMELIST_SIZE; i += 2) { - list_insert(framelist + i, get_period_head(rhport, 2u), EHCI_QTYPE_QHD); + list_insert(framelist + i, head_2ms, EHCI_QTYPE_QHD); } for (uint32_t i = 1; i < FRAMELIST_SIZE; i += 4) { - list_insert(framelist + i, get_period_head(rhport, 4u), EHCI_QTYPE_QHD); + list_insert(framelist + i, head_4ms, EHCI_QTYPE_QHD); } - list_insert(framelist + 3, get_period_head(rhport, 8u), EHCI_QTYPE_QHD); + list_insert(framelist + 3, head_8ms, EHCI_QTYPE_QHD); - period_1ms->terminate = 1; + head_1ms->terminate = 1; } bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) @@ -341,18 +307,18 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) regs->status = (EHCI_INT_MASK_ALL & ~EHCI_INT_MASK_PORT_CHANGE); // Enable interrupts - regs->inten = EHCI_INT_MASK_ERROR | EHCI_INT_MASK_PORT_CHANGE | EHCI_INT_MASK_ASYNC_ADVANCE | - EHCI_INT_MASK_NXP_PERIODIC | EHCI_INT_MASK_NXP_ASYNC | EHCI_INT_MASK_FRAMELIST_ROLLOVER; + regs->inten = EHCI_INT_MASK_USB | EHCI_INT_MASK_ERROR | EHCI_INT_MASK_PORT_CHANGE | + EHCI_INT_MASK_ASYNC_ADVANCE | EHCI_INT_MASK_FRAMELIST_ROLLOVER; //------------- Asynchronous List -------------// - ehci_qhd_t * const async_head = qhd_async_head(rhport); + ehci_qhd_t * const async_head = list_get_async_head(rhport); tu_memclr(async_head, sizeof(ehci_qhd_t)); - async_head->next.address = (uint32_t) async_head; // circular list, next is itself - async_head->next.type = EHCI_QTYPE_QHD; - async_head->head_list_flag = 1; - async_head->qtd_overlay.halted = 1; // inactive most of time - async_head->qtd_overlay.next.terminate = 1; // TODO removed if verified + async_head->next.address = (uint32_t) async_head; // circular list, next is itself + async_head->next.type = EHCI_QTYPE_QHD; + async_head->head_list_flag = 1; + async_head->qtd_overlay.halted = 1; // inactive most of time + async_head->qtd_overlay.next.terminate = 1; // TODO removed if verified regs->async_list_addr = (uint32_t) async_head; @@ -366,8 +332,7 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) regs->nxp_tt_control = 0; //------------- USB CMD Register -------------// - regs->command |= TU_BIT(EHCI_USBCMD_POS_RUN_STOP) | TU_BIT(EHCI_USBCMD_POS_ASYNC_ENABLE) | - TU_BIT(EHCI_USBCMD_POS_PERIOD_ENABLE) | // TODO enable period list only there is int/iso endpoint + regs->command |= EHCI_USBCMD_RUN_STOP | EHCI_USBCMD_PERIOD_SCHEDULE_ENABLE | EHCI_USBCMD_ASYNC_SCHEDULE_ENABLE | FRAMELIST_SIZE_USBCMD_VALUE; //------------- ConfigFlag Register (skip) -------------// @@ -377,7 +342,7 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) if (ehci_data.cap_regs->hcsparams_bm.port_power_control) { // mask out all change bits since they are Write 1 to clear uint32_t portsc = (regs->portsc & ~EHCI_PORTSC_MASK_W1C); - portsc |= ECHI_PORTSC_MASK_PORT_POWER; + portsc |= EHCI_PORTSC_MASK_PORT_POWER; regs->portsc = portsc; } @@ -426,11 +391,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const { case TUSB_XFER_CONTROL: case TUSB_XFER_BULK: - list_head = (ehci_link_t*) qhd_async_head(rhport); + list_head = (ehci_link_t*) list_get_async_head(rhport); break; case TUSB_XFER_INTERRUPT: - list_head = get_period_head(rhport, p_qhd->interval_ms); + list_head = list_get_period_head(rhport, p_qhd->interval_ms); break; case TUSB_XFER_ISOCHRONOUS: @@ -439,10 +404,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const default: break; } - TU_ASSERT(list_head); - // TODO might need to disable async/period list list_insert(list_head, (ehci_link_t*) p_qhd, EHCI_QTYPE_QHD); hcd_dcache_clean(p_qhd, sizeof(ehci_qhd_t)); @@ -476,20 +439,25 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - ehci_qhd_t* qhd; + ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr); ehci_qtd_t* qtd; if (epnum == 0) { - qhd = qhd_control(dev_addr); - qtd = qtd_control(dev_addr); + // Control endpoint never be stalled. Skip reset Data Toggle since it is fixed per stage + if (qhd->qtd_overlay.halted) { + qhd->qtd_overlay.halted = false; + } + qtd = qtd_control(dev_addr); qtd_init(qtd, buffer, buflen); // first data toggle is always 1 (data & setup stage) qtd->data_toggle = 1; qtd->pid = dir ? EHCI_PID_IN : EHCI_PID_OUT; } else { - qhd = qhd_get_from_addr(dev_addr, ep_addr); + // skip if endpoint is halted + TU_VERIFY(!qhd->qtd_overlay.halted); + qtd = qtd_find_free(); TU_ASSERT(qtd); @@ -510,12 +478,45 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } -bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) -{ +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + + // TODO ISO not supported yet + ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr); + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + TU_VERIFY(qtd != NULL); // no queued transfer + + hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); + TU_VERIFY(qtd->active); // transfer is already complete + + // HC is still processing, disable HC list schedule before making changes + bool const is_period = (qhd->interval_ms > 0); + + ehci_disable_schedule(ehci_data.regs, is_period); + + // check active bit again just in case HC has just processed the TD + bool const still_active = qtd->active; + if (still_active) { + // remove TD from QH overlay + qhd->qtd_overlay.next.terminate = 1; + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + + // remove TD from QH software list + qhd_remove_qtd(qhd); + } + + ehci_enable_schedule(ehci_data.regs, is_period); + + return still_active; // true if removed an active transfer +} + +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; ehci_qhd_t *qhd = qhd_get_from_addr(daddr, ep_addr); qhd->qtd_overlay.halted = 0; + qhd->qtd_overlay.data_toggle = 0; hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); - // TODO reset data toggle ? + return true; } @@ -541,71 +542,77 @@ void async_advance_isr(uint8_t rhport) } TU_ATTR_ALWAYS_INLINE static inline -void port_connect_status_change_isr(uint8_t rhport) -{ +void port_connect_status_change_isr(uint8_t rhport) { // NOTE There is an sequence plug->unplug->…..-> plug if device is powering with pre-plugged device - if (ehci_data.regs->portsc_bm.current_connect_status) - { + if ( ehci_data.regs->portsc_bm.current_connect_status ) { hcd_port_reset(rhport); hcd_event_device_attach(rhport, true); - }else // device unplugged + } else // device unplugged { hcd_event_device_remove(rhport, true); } } +// Check queue head for potential transfer complete (successful or error) TU_ATTR_ALWAYS_INLINE static inline void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { - // examine TD attached to queue head - ehci_qtd_t * volatile qtd = (ehci_qtd_t * volatile) qhd->attached_qtd; - if (qtd == NULL) return; // no TD attached - hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); + hcd_dcache_invalidate(qhd, sizeof(ehci_qhd_t)); // HC may have updated the overlay + volatile ehci_qtd_t *qtd_overlay = &qhd->qtd_overlay; - // TD is still active, no need to process - if (qtd->active) { - return; - } + // process non-active (completed) QHD with attached (scheduled) TD + if ( !qtd_overlay->active && qhd->attached_qtd != NULL ) { + xfer_result_t xfer_result; - uint8_t dir = (qtd->pid == EHCI_PID_IN) ? 1 : 0; - uint32_t const xferred_bytes = qtd->expected_bytes - qtd->total_bytes; + if ( qtd_overlay->halted ) { + if (qtd_overlay->xact_err || qtd_overlay->err_count == 0 || qtd_overlay->buffer_err || qtd_overlay->babble_err) { + // Error count = 0 often occurs when device disconnected, or other bus-related error + xfer_result = XFER_RESULT_FAILED; + TU_LOG3(" QHD xfer err count: %d\n", qtd_overlay->err_count); + // TU_BREAKPOINT(); // TODO skip unplugged device + }else { + // no error bits are set, endpoint is halted due to STALL + xfer_result = XFER_RESULT_STALLED; + } + } else { + xfer_result = XFER_RESULT_SUCCESS; + } - // invalidate dcache if IN transfer - if (dir == 1 && qhd->attached_buffer != 0 && xferred_bytes > 0) { - hcd_dcache_invalidate((void*) qhd->attached_buffer, xferred_bytes); - } + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); // HC may have written back TD - // remove and free TD before invoking callback - qhd->attached_qtd = NULL; - qhd->attached_buffer = 0; - qtd->used = 0; // free QTD + uint8_t const dir = (qtd->pid == EHCI_PID_IN) ? 1 : 0; + uint32_t const xferred_bytes = qtd->expected_bytes - qtd->total_bytes; + + // invalidate dcache if IN transfer with data + if (dir == 1 && qhd->attached_buffer != 0 && xferred_bytes > 0) { + hcd_dcache_invalidate((void*) qhd->attached_buffer, xferred_bytes); + } + + // remove and free TD before invoking callback + qhd_remove_qtd(qhd); - // notify usbh - uint8_t const ep_addr = tu_edpt_addr(qhd->ep_number, dir); - hcd_event_xfer_complete(qhd->dev_addr, ep_addr, xferred_bytes, XFER_RESULT_SUCCESS, true); + // notify usbh + uint8_t const ep_addr = tu_edpt_addr(qhd->ep_number, dir); + hcd_event_xfer_complete(qhd->dev_addr, ep_addr, xferred_bytes, xfer_result, true); + } } TU_ATTR_ALWAYS_INLINE static inline -void async_list_xfer_complete_isr(ehci_qhd_t * const async_head) +void proccess_async_xfer_isr(ehci_qhd_t * const list_head) { - ehci_qhd_t *p_qhd = async_head; - do - { - hcd_dcache_invalidate(p_qhd, sizeof(ehci_qhd_t)); - - // halted or error is processed in error isr - if ( !p_qhd->qtd_overlay.halted ) { - qhd_xfer_complete_isr(p_qhd); - } + ehci_qhd_t *qhd = list_head; - p_qhd = qhd_next(p_qhd); - }while(p_qhd != async_head); // async list traversal, stop if loop around + do { + qhd_xfer_complete_isr(qhd); + qhd = qhd_next(qhd); + } while ( qhd != list_head ); // async list traversal, stop if loop around } TU_ATTR_ALWAYS_INLINE static inline -void period_list_xfer_complete_isr(uint8_t rhport, uint32_t interval_ms) +void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) { - uint32_t const period_1ms_addr = (uint32_t) get_period_head(rhport, 1u); - ehci_link_t next_link = * get_period_head(rhport, interval_ms); + uint32_t const period_1ms_addr = (uint32_t) list_get_period_head(rhport, 1u); + ehci_link_t next_link = *list_get_period_head(rhport, interval_ms); while (!next_link.terminate) { if (interval_ms > 1 && period_1ms_addr == tu_align32(next_link.address)) { @@ -618,22 +625,13 @@ void period_list_xfer_complete_isr(uint8_t rhport, uint32_t interval_ms) switch (next_link.type) { case EHCI_QTYPE_QHD: { ehci_qhd_t *qhd = (ehci_qhd_t *) entry_addr; - hcd_dcache_invalidate(qhd, sizeof(ehci_qhd_t)); - - if (!qhd->qtd_overlay.halted) { - qhd_xfer_complete_isr(qhd); - } + qhd_xfer_complete_isr(qhd); } break; + // TODO support hs/fs ISO case EHCI_QTYPE_ITD: - // TODO support hs ISO - break; - case EHCI_QTYPE_SITD: - // TODO support split ISO - break; - case EHCI_QTYPE_FSTN: default: break; @@ -643,108 +641,6 @@ void period_list_xfer_complete_isr(uint8_t rhport, uint32_t interval_ms) } } -// TODO merge with qhd_xfer_complete_isr() -TU_ATTR_ALWAYS_INLINE static inline -void qhd_xfer_error_isr(ehci_qhd_t * qhd) -{ - volatile ehci_qtd_t *qtd_overlay = &qhd->qtd_overlay; - - // TD has error - if (qtd_overlay->halted) { - xfer_result_t xfer_result; - - if (qtd_overlay->xact_err || qtd_overlay->err_count == 0 || qtd_overlay->buffer_err || qtd_overlay->babble_err) { - // Error count = 0 often occurs when device disconnected, or other bus-related error - xfer_result = XFER_RESULT_FAILED; - }else { - // no error bits are set, endpoint is halted due to STALL - xfer_result = XFER_RESULT_STALLED; - } - -// if (XFER_RESULT_FAILED == xfer_result ) { -// TU_LOG1(" QHD xfer err count: %d\n", qtd_overlay->err_count); -// TU_BREAKPOINT(); // TODO skip unplugged device -// } - - ehci_qtd_t * volatile qtd = (ehci_qtd_t * volatile) qhd->attached_qtd; - TU_ASSERT(qtd, ); // No TD yet, probably a race condition or cache issue !? - - hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); - - uint8_t dir = (qtd->pid == EHCI_PID_IN) ? 1 : 0; - uint32_t const xferred_bytes = qtd->expected_bytes - qtd->total_bytes; - - // invalidate dcache if IN transfer - if (dir == 1 && qhd->attached_buffer != 0 && xferred_bytes > 0) { - hcd_dcache_invalidate((void*) qhd->attached_buffer, xferred_bytes); - } - - // remove and free TD before invoking callback - qhd->attached_qtd = NULL; - qhd->attached_buffer = 0; - qtd->used = 0; // free QTD - - if (0 == qhd->ep_number ) { - // control cannot be halted - qhd->qtd_overlay.next.terminate = 1; - qhd->qtd_overlay.alternate.terminate = 1; - qhd->qtd_overlay.halted = 0; - - hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); - } - - // notify usbh - uint8_t const ep_addr = tu_edpt_addr(qhd->ep_number, dir); - hcd_event_xfer_complete(qhd->dev_addr, ep_addr, xferred_bytes, xfer_result, true); - } -} - -TU_ATTR_ALWAYS_INLINE static inline -void xfer_error_isr(uint8_t rhport) -{ - //------------- async list -------------// - ehci_qhd_t * const async_head = qhd_async_head(rhport); - ehci_qhd_t *p_qhd = async_head; - do - { - hcd_dcache_invalidate(p_qhd, sizeof(ehci_qhd_t)); - qhd_xfer_error_isr( p_qhd ); - p_qhd = qhd_next(p_qhd); - }while(p_qhd != async_head); // async list traversal, stop if loop around - - //------------- TODO refractor period list -------------// - uint32_t const period_1ms_addr = (uint32_t) get_period_head(rhport, 1u); - for (uint32_t interval_ms=1; interval_ms <= FRAMELIST_SIZE; interval_ms *= 2) - { - ehci_link_t next_item = * get_period_head(rhport, interval_ms); - - // TODO abstract max loop guard for period - while( !next_item.terminate && - !(interval_ms > 1 && period_1ms_addr == tu_align32(next_item.address)) ) - { - switch ( next_item.type ) - { - case EHCI_QTYPE_QHD: - { - ehci_qhd_t *p_qhd_int = (ehci_qhd_t *) tu_align32(next_item.address); - hcd_dcache_invalidate(p_qhd_int, sizeof(ehci_qhd_t)); - - qhd_xfer_error_isr(p_qhd_int); - } - break; - - // TODO support hs/fs ISO - case EHCI_QTYPE_ITD: - case EHCI_QTYPE_SITD: - case EHCI_QTYPE_FSTN: - default: break; - } - - next_item = *list_next(&next_item); - } - } -} - //------------- Host Controller Driver's Interrupt Handler -------------// void hcd_int_handler(uint8_t rhport) { @@ -776,29 +672,16 @@ void hcd_int_handler(uint8_t rhport) regs->status = EHCI_INT_MASK_PORT_CHANGE; // Acknowledge } - if (int_status & EHCI_INT_MASK_ERROR) { - xfer_error_isr(rhport); - regs->status = EHCI_INT_MASK_ERROR; // Acknowledge - } - - //------------- some QTD/SITD/ITD with IOC set is completed -------------// - if (int_status & EHCI_INT_MASK_NXP_ASYNC) { - async_list_xfer_complete_isr(qhd_async_head(rhport)); - regs->status = EHCI_INT_MASK_NXP_ASYNC; // Acknowledge - } + // A USB transfer is completed (OK or error) + uint32_t const usb_int = int_status & (EHCI_INT_MASK_USB | EHCI_INT_MASK_ERROR); + if (usb_int) { + proccess_async_xfer_isr(list_get_async_head(rhport)); - if (int_status & EHCI_INT_MASK_NXP_PERIODIC) - { - for (uint32_t i=1; i <= FRAMELIST_SIZE; i *= 2) - { - period_list_xfer_complete_isr(rhport, i); + for ( uint32_t i = 1; i <= FRAMELIST_SIZE; i *= 2 ) { + process_period_xfer_isr(rhport, i); } - regs->status = EHCI_INT_MASK_NXP_PERIODIC; // Acknowledge - } - if (int_status & EHCI_INT_MASK_USB) { - // TODO standard EHCI xfer complete - regs->status = EHCI_INT_MASK_USB; // Acknowledge + regs->status = usb_int; // Acknowledge } //------------- There is some removed async previously -------------// @@ -810,35 +693,103 @@ void hcd_int_handler(uint8_t rhport) } //--------------------------------------------------------------------+ -// HELPER +// List Managing Helper //--------------------------------------------------------------------+ +// Get head of periodic list +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms) { + (void) rhport; + return (ehci_link_t*) &ehci_data.period_head_arr[ tu_log2( tu_min32(FRAMELIST_SIZE, interval_ms) ) ]; +} + +// Get head of async list +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport) { + (void) rhport; + return qhd_control(0); // control qhd of dev0 is used as async head +} + +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next(ehci_link_t const *p_link) { + return (ehci_link_t*) tu_align32(p_link->address); +} -//------------- queue head helper -------------// -static inline ehci_qhd_t* qhd_find_free (void) +TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) { - for (uint32_t i=0; i<QHD_MAX; i++) - { - if ( !ehci_data.qhd_pool[i].used ) return &ehci_data.qhd_pool[i]; + new->address = current->address; + current->address = ((uint32_t) new) | (new_type << 1); +} + +// Remove all queue head belong to this device address +static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) { + ehci_link_t* prev = list_head; + + while (prev && !prev->terminate) { + ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev); + + // done if loop back to head + if ( (uintptr_t) qhd == (uintptr_t) list_head) { + break; + } + + if ( qhd->dev_addr == dev_addr ) { + // TODO deactivate all TD, wait for QHD to inactive before removal + prev->address = qhd->next.address; + + // EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller) + qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1); + + if ( qhd->int_smask ) + { + // period list queue element is guarantee to be free in the next frame (1 ms) + qhd->used = 0; + }else + { + // async list use async advance handshake + // mark as removing, will completely re-usable when async advance isr occurs + qhd->removing = 1; + } + + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); + }else { + prev = list_next(prev); + } } +} + +//--------------------------------------------------------------------+ +// Queue Header helper +//--------------------------------------------------------------------+ + +// Get queue head for control transfer (always available) +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr) { + return &ehci_data.control[dev_addr].qhd; +} + +// Find a free queue head +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_find_free(void) { + for ( uint32_t i = 0; i < QHD_MAX; i++ ) { + if ( !ehci_data.qhd_pool[i].used ) return &ehci_data.qhd_pool[i]; + } return NULL; } -static inline ehci_qhd_t* qhd_next(ehci_qhd_t const * p_qhd) -{ - return (ehci_qhd_t*) tu_align32(p_qhd->next.address); +// Next queue head link +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_next(ehci_qhd_t const *p_qhd) { + return (ehci_qhd_t *) tu_align32(p_qhd->next.address); } -static inline ehci_qhd_t* qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) -{ - ehci_qhd_t* qhd_pool = ehci_data.qhd_pool; +// Get queue head from device + endpoint address +static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) { + if ( 0 == tu_edpt_number(ep_addr) ) { + return qhd_control(dev_addr); + } - for(uint32_t i=0; i<QHD_MAX; i++) - { + ehci_qhd_t *qhd_pool = ehci_data.qhd_pool; + + for ( uint32_t i = 0; i < QHD_MAX; i++ ) { if ( (qhd_pool[i].dev_addr == dev_addr) && - ep_addr == tu_edpt_addr(qhd_pool[i].ep_number, qhd_pool[i].pid) ) - { + ep_addr == tu_edpt_addr(qhd_pool[i].ep_number, qhd_pool[i].pid) ) { return &qhd_pool[i]; } } @@ -846,6 +797,7 @@ static inline ehci_qhd_t* qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) return NULL; } +// Init queue head with endpoint descriptor static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { // address 0 is used as async head, which always on the list --> cannot be cleared (ehci halted otherwise) @@ -920,6 +872,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c } } +// Attach a TD to queue head static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd) { qhd->attached_qtd = qtd; qhd->attached_buffer = qtd->buffer[0]; @@ -931,17 +884,35 @@ static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd) { hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); } +// Remove an attached TD from queue head +static void qhd_remove_qtd(ehci_qhd_t *qhd) { + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + + qhd->attached_qtd = NULL; + qhd->attached_buffer = 0; + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + + qtd->used = 0; // free QTD + hcd_dcache_clean(qtd, sizeof(ehci_qtd_t)); +} + +//--------------------------------------------------------------------+ +// Queue TD helper +//--------------------------------------------------------------------+ + +// Get TD for control transfer (always available) +TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr) { + return &ehci_data.control[dev_addr].qtd; +} -//------------- TD helper -------------// -static inline ehci_qtd_t *qtd_find_free(void) { +TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t *qtd_find_free(void) { for (uint32_t i = 0; i < QTD_MAX; i++) { if (!ehci_data.qtd_pool[i].used) return &ehci_data.qtd_pool[i]; } return NULL; } -static void qtd_init(ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) -{ +static void qtd_init(ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) { tu_memclr(qtd, sizeof(ehci_qtd_t)); qtd->used = 1; @@ -955,24 +926,9 @@ static void qtd_init(ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) qtd->expected_bytes = total_bytes; qtd->buffer[0] = (uint32_t) buffer; - for(uint8_t i=1; i<5; i++) - { + for(uint8_t i=1; i<5; i++) { qtd->buffer[i] |= tu_align4k(qtd->buffer[i - 1] ) + 4096; } } -//------------- List Managing Helper -------------// - -// insert at head -static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) -{ - new->address = current->address; - current->address = ((uint32_t) new) | (new_type << 1); -} - -static inline ehci_link_t* list_next(ehci_link_t const *p_link) -{ - return (ehci_link_t*) tu_align32(p_link->address); -} - #endif diff --git a/src/portable/ehci/ehci.h b/src/portable/ehci/ehci.h index 8338fb419..457adc1d3 100644 --- a/src/portable/ehci/ehci.h +++ b/src/portable/ehci/ehci.h @@ -278,23 +278,24 @@ enum { EHCI_INT_MASK_PERIODIC_SCHED_STATUS = TU_BIT(14), EHCI_INT_MASK_ASYNC_SCHED_STATUS = TU_BIT(15), - EHCI_INT_MASK_NXP_ASYNC = TU_BIT(18), - EHCI_INT_MASK_NXP_PERIODIC = TU_BIT(19), - EHCI_INT_MASK_ALL = EHCI_INT_MASK_USB | EHCI_INT_MASK_ERROR | EHCI_INT_MASK_PORT_CHANGE | EHCI_INT_MASK_FRAMELIST_ROLLOVER | EHCI_INT_MASK_PCI_HOST_SYSTEM_ERROR | - EHCI_INT_MASK_ASYNC_ADVANCE | EHCI_INT_MASK_NXP_SOF | - EHCI_INT_MASK_NXP_ASYNC | EHCI_INT_MASK_NXP_PERIODIC + EHCI_INT_MASK_ASYNC_ADVANCE | EHCI_INT_MASK_NXP_SOF +}; + +enum { + EHCI_USBCMD_FRAMELIST_SIZE_SHIFT = 2, // [2..3] + EHCI_USBCMD_CHIPIDEA_FRAMELIST_SIZE_MSB_SHIFT = 15, + EHCI_USBCMD_INTERRUPT_THRESHOLD_SHIFT = 16 }; enum { - EHCI_USBCMD_POS_RUN_STOP = 0, - EHCI_USBCMD_POS_FRAMELIST_SIZE = 2, - EHCI_USBCMD_POS_PERIOD_ENABLE = 4, - EHCI_USBCMD_POS_ASYNC_ENABLE = 5, - EHCI_USBCMD_POS_NXP_FRAMELIST_SIZE_MSB = 15, - EHCI_USBCMD_POS_INTERRUPT_THRESHOLD = 16 + EHCI_USBCMD_RUN_STOP = TU_BIT(0), // [0..0] 1 = Run, 0 = Stop + EHCI_USBCMD_HCRESET = TU_BIT(1), // [1..1] SW write 1 to reset HC, clear by HC when complete + EHCI_USBCMD_PERIOD_SCHEDULE_ENABLE = TU_BIT(4), // [4..4] Enable periodic schedule + EHCI_USBCMD_ASYNC_SCHEDULE_ENABLE = TU_BIT(5), // [5..5] Enable async schedule + EHCI_USBCMD_INTR_ON_ASYNC_ADVANCE_DOORBELL = TU_BIT(6), // [6..6] Tell HC to interrupt next time it advances async list. Clear by HC }; enum { @@ -306,7 +307,7 @@ enum { EHCI_PORTSC_MASK_FORCE_RESUME = TU_BIT(6), EHCI_PORTSC_MASK_PORT_SUSPEND = TU_BIT(7), EHCI_PORTSC_MASK_PORT_RESET = TU_BIT(8), - ECHI_PORTSC_MASK_PORT_POWER = TU_BIT(12), + EHCI_PORTSC_MASK_PORT_POWER = TU_BIT(12), EHCI_PORTSC_MASK_W1C = EHCI_PORTSC_MASK_CONNECT_STATUS_CHANGE | diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 9eb2e005e..5d1fba6d9 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -822,9 +822,17 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b return ret; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; unsigned const pipenum = find_pipe(dev_addr, ep_addr); if (!pipenum) return false; hw_endpoint_t volatile *regs = edpt_regs(pipenum - 1); diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 6986c8317..ccc27c3c9 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -189,7 +189,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) volatile static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) volatile static dcd_data_t _dcd; #if TU_PIC_INT_SIZE == 4 TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 2bbb345d6..9586df84d 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -77,7 +77,7 @@ static tusb_speed_t get_speed(void); static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix); // DMA descriptors shouldn't be placed in ITCM ! -CFG_TUSB_MEM_SECTION static dma_desc_t dma_desc[6]; +CFG_TUD_MEM_SECTION static dma_desc_t dma_desc[6]; static xfer_ctl_t xfer_status[EP_MAX]; diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index 39b09db68..c3d0c7297 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -110,7 +110,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 52f4145f2..5c65ea33d 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -114,7 +114,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index f6029ee0d..928564e26 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -562,8 +562,16 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; if (!tu_edpt_number(ep_addr)) return true; int num = find_pipe(dev_addr, ep_addr); if (num < 0) return false; diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index 86149afd8..b880c2870 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -92,7 +92,7 @@ typedef struct } dcd_data_t; -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(128) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(128) static dcd_data_t _dcd; //--------------------------------------------------------------------+ diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 5368ef868..7ca698a93 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -176,11 +176,11 @@ typedef struct // EP list must be 256-byte aligned // Some MCU controller may require this variable to be placed in specific SRAM region. // For example: LPC55s69 port1 Highspeed must be USB_RAM (0x40100000) -// Use CFG_TUSB_MEM_SECTION to place it accordingly. -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd; +// Use CFG_TUD_MEM_SECTION to place it accordingly. +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd; // Dummy buffer to fix ZLPs overwriting the buffer (probably an USB/DMA controller bug) -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; //--------------------------------------------------------------------+ // Multiple Controllers diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 3f702d22c..413e72037 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -341,19 +341,24 @@ static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t p_ed->is_interrupt_xfer = (xfer_type == TUSB_XFER_INTERRUPT ? 1 : 0); } -static void gtd_init(ohci_gtd_t* p_td, uint8_t* data_ptr, uint16_t total_bytes) -{ +static void gtd_init(ohci_gtd_t *p_td, uint8_t *data_ptr, uint16_t total_bytes) { tu_memclr(p_td, sizeof(ohci_gtd_t)); - p_td->used = 1; - p_td->expected_bytes = total_bytes; + p_td->used = 1; + p_td->expected_bytes = total_bytes; + + p_td->buffer_rounding = 1; // less than queued length is not a error + p_td->delay_interrupt = OHCI_INT_ON_COMPLETE_NO; + p_td->condition_code = OHCI_CCODE_NOT_ACCESSED; - p_td->buffer_rounding = 1; // less than queued length is not a error - p_td->delay_interrupt = OHCI_INT_ON_COMPLETE_NO; - p_td->condition_code = OHCI_CCODE_NOT_ACCESSED; + uint8_t *cbp = (uint8_t *) _phys_addr(data_ptr); - p_td->current_buffer_pointer = _phys_addr(data_ptr); - p_td->buffer_end = total_bytes ? (_phys_addr(data_ptr + total_bytes - 1)) : (uint8_t *)p_td->current_buffer_pointer; + p_td->current_buffer_pointer = cbp; + if ( total_bytes ) { + p_td->buffer_end = _phys_addr(data_ptr + total_bytes - 1); + } else { + p_td->buffer_end = cbp; + } } static ohci_ed_t * ed_from_addr(uint8_t dev_addr, uint8_t ep_addr) @@ -487,7 +492,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet ohci_ed_t* ed = &ohci_data.control[dev_addr].ed; ohci_gtd_t *qtd = &ohci_data.control[dev_addr].gtd; - gtd_init(qtd, (uint8_t*) setup_packet, 8); + gtd_init(qtd, (uint8_t*)(uintptr_t) setup_packet, 8); qtd->index = dev_addr; qtd->pid = PID_SETUP; qtd->data_toggle = GTD_DT_DATA0; @@ -543,8 +548,16 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; ohci_ed_t * const p_ed = ed_from_addr(dev_addr, ep_addr); p_ed->is_stalled = 0; diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 264af2e7a..45a3e80ef 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -138,6 +138,11 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen); } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + uint8_t const pio_rhport = RHPORT_PIO(rhport); + return pio_usb_host_endpoint_abort_transfer(pio_rhport, dev_addr, ep_addr); +} + bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { uint8_t const pio_rhport = RHPORT_PIO(rhport); @@ -158,8 +163,8 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet // return busy; //} -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; (void) dev_addr; (void) ep_addr; diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 02f9968a7..6db8e2a0a 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -576,6 +576,14 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void) rhport; @@ -617,8 +625,8 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet return true; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; (void) dev_addr; (void) ep_addr; diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index a4b534a05..fef8bdf19 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -752,9 +752,15 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b return r; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ - uint8_t rhport = 0; // FIXME change API +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { uint16_t volatile *ctr = addr_to_pipectr(rhport, dev_addr, ep_addr); TU_ASSERT(ctr); diff --git a/src/tusb_option.h b/src/tusb_option.h index f16d8a5d0..7a4cfe51c 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -295,15 +295,14 @@ #define CFG_TUSB_DEBUG 0 #endif -// TODO MEM_SECTION can be different for host and device controller -// should use CFG_TUD_MEM_SECTION, CFG_TUH_MEM_SECTION +// Memory section for placing buffer used for usb transferring. If MEM_SECTION is different for +// host and device use: CFG_TUD_MEM_SECTION, CFG_TUH_MEM_SECTION instead #ifndef CFG_TUSB_MEM_SECTION #define CFG_TUSB_MEM_SECTION #endif -// alignment requirement of buffer used for endpoint transferring -// TODO MEM_ALIGN can be different for host and device controller -// should use CFG_TUD_MEM_ALIGN, CFG_TUH_MEM_ALIGN +// Alignment requirement of buffer used for usb transferring. if MEM_ALIGN is different for +// host and device controller use: CFG_TUD_MEM_ALIGN, CFG_TUH_MEM_ALIGN instead #ifndef CFG_TUSB_MEM_ALIGN #define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4) #endif @@ -321,24 +320,14 @@ // Device Options (Default) //-------------------------------------------------------------------- -// Attribute to place data in accessible RAM for device controller -// default to CFG_TUSB_MEM_SECTION for backward-compatible +// Attribute to place data in accessible RAM for device controller (default: CFG_TUSB_MEM_SECTION) #ifndef CFG_TUD_MEM_SECTION - #ifdef CFG_TUSB_MEM_SECTION - #define CFG_TUD_MEM_SECTION CFG_TUSB_MEM_SECTION - #else - #define CFG_TUD_MEM_SECTION - #endif + #define CFG_TUD_MEM_SECTION CFG_TUSB_MEM_SECTION #endif -// Attribute to align memory for device controller -// default to CFG_TUSB_MEM_ALIGN for backward-compatible +// Attribute to align memory for device controller (default: CFG_TUSB_MEM_ALIGN) #ifndef CFG_TUD_MEM_ALIGN - #ifdef CFG_TUSB_MEM_ALIGN - #define CFG_TUD_MEM_ALIGN CFG_TUSB_MEM_ALIGN - #else - #define CFG_TUD_MEM_ALIGN TU_ATTR_ALIGNED(4) - #endif + #define CFG_TUD_MEM_ALIGN CFG_TUSB_MEM_ALIGN #endif #ifndef CFG_TUD_ENDPOINT0_SIZE @@ -419,19 +408,14 @@ #endif #endif // CFG_TUH_ENABLED -// Attribute to place data in accessible RAM for host controller -// default to CFG_TUSB_MEM_SECTION for backward-compatible +// Attribute to place data in accessible RAM for host controller (default: CFG_TUSB_MEM_SECTION) #ifndef CFG_TUH_MEM_SECTION - #ifdef CFG_TUSB_MEM_SECTION - #define CFG_TUH_MEM_SECTION CFG_TUSB_MEM_SECTION - #else - #define CFG_TUH_MEM_SECTION - #endif + #define CFG_TUH_MEM_SECTION CFG_TUSB_MEM_SECTION #endif // Attribute to align memory for host controller #ifndef CFG_TUH_MEM_ALIGN - #define CFG_TUH_MEM_ALIGN TU_ATTR_ALIGNED(4) + #define CFG_TUH_MEM_ALIGN CFG_TUSB_MEM_ALIGN #endif //------------- CLASS -------------// |