|
EP0 control-OUT fix (usbtest 14/21, errno 110/-74): usbd queues the
status-stage OUT ZLP of every control read with buffer=NULL, so the ISR's
`if (out_buffer)` check missed it and marked the arriving ZLP as
out_received instead. The stale flag poisoned the next control-OUT with
data: its first chunk "completed" instantly from an empty EP0 buffer and
the host's real DATA NAKed forever. Track queued transfers with an
explicit out_queued flag and void half-finished control state on a new
SETUP.
Isochronous support (UM10562 12.15.6): 5-word DMA descriptors with
per-packet size memory, buflen/present_count in packets, one packet per
FRAME (no DMARSet/EpIntEn involvement), completion at EOT for both
directions. Details that matter:
- the iso machinery (5th DD word + packet-size memory) is compiled only
when an iso-capable class is enabled (CFG_TUD_AUDIO/VIDEO/VENDOR), so
non-iso builds pay nothing: _dcd stays 648 B vs 1032 B with iso
- ISR dispatch keys on the hardware's fixed ep-number/type map
(ep_id_is_iso), never on dd fields that thread mode rebuilds
- iso OUT honors Packet_valid (bit 16) and prefills the hardware
writeback slots with 0, so a missed frame counts as 0 bytes instead of
reading back stale buffer contents as data
- packet count is validated (tu_div_ceil <= ISO_MAX_PACKETS) before the
DD is touched, so an oversized transfer is refused without leaving a
serviceable half-built descriptor armed for the frame engine
- dcd_edpt_iso_alloc and iso_activate both enforce the fixed iso endpoint
numbers (3/6/9/12); classes ignore alloc's return value, so activate
must not trust it
Un-skip LPC40XX in the usbtest example; tier 4 now enumerates and passes
iso cases 15/16/22/23. cdc_msc_throughput and printer_to_cdc had bulk on
iso-only EP3 (SET_CONFIGURATION failed with -32); add the LPC17/40 EPNUM
block (bulk on EP2/EP5) like other fixed-EP examples.
Verified on ea4088_quickstart: usbtest tier-4 battery 30/30 repeatedly
and the full device HIL suite 14/14 (incl. audio_test iso).
|
|
Pool/config:
- record real uids (ra8m1_ek), enable usbtest for espressif s3/p4, then
park ra6m5_ek and ra8m1_ek in boards-skip (ra6m5's usbtest/MSC traffic
can kill the uPD720201 host on its ROM firmware; ra8m1 USBHS bring-up
pending); max32666/nrf54lm20 stay enabled - their MosChip flakiness
never wedges
- re-enable device/usbtest on HS boards (mimxrt1064, ch32v307) now that
uPD720201 firmware 2.0.2.6 fixes the command-ring death; mimxrt1015
stays skipped - its HS battery killed the controller on both ROM and
2.0.2.6 firmware (board-specific); match the moved host-test bundles
(f723 <-> rt1064); skip never-passing tests on the new
nrf5340dk/nrf54lm20dk boards and the detached pico host bundle, each
documented with a comment
Host-controller quirk gating in usbtest.py (auto-skip, self-heals on a
healthy xHCI):
- MosChip MCS9990 EHCI: case 25 (int-OUT never scheduled, FRINDEX bug)
and case 11 (unlinked reads complete short/EREMOTEIO)
- Renesas uPD720201 xHCI: firmware-gated. The card must run firmware
>= 2.0.2.6 (RAM-uploaded - it reverts to ROM on every power cycle):
on older firmware the command ring dies under unlink stress (a
Configure Endpoint command stops completing; the hub worker deadlocks
holding the device lock; only a host power cycle recovers; three
boards reproduced it). usbtest.py reads the FW version register (PCI
config 0x6c) and refuses to run at all on older firmware - hil_test
surfaces that as a failed test with the reason. On current firmware
the full 30-case battery runs (validated FS+HS: metro_m4, f723,
f723-DMA all 30/30).
Scheduling (hil_test.py):
- Shuffle each (board, variant)'s test order with a seeded RNG
(HIL_SHUFFLE_SEED to replay) so usbtest batteries and flash churn spread
across the timeline instead of convoying on one controller.
- Per-controller usbtest + flash semaphores: HIL_USBTEST_PARALLEL
(default 4) concurrent usbtest batteries and HIL_FLASH_PARALLEL
(default 8) concurrent flashes per host controller. Profiled on
uPD720201 firmware 2.0.2.6 across 8/1..12/8: wall time falls
22.2/14.3/12.5/10.8 min at usbtest width 1/2/3/4 and plateaus there;
zero controller errors everywhere; first battery case failures
(leaf-hub bandwidth stretch) appear at 12/8, and flash width 12 only
amplifies flasher-hub contention flakes - so 8/4 is the optimum. A
separate battery-window flash throttle was profiled and dropped.
- Give every example a unique hardcoded USB PID (0x4001-0x4022, usbtest
keeps 0x4010) instead of the PID_MAP interface bitmap: different
examples now always re-enumerate back-to-back, even on boards whose
CPU reset does not drop D+ (WCH CH58x), so the EXAMPLE_PID table and
same-PID adjacency reordering in hil_test.py are gone; only the
variant-boundary same-example repeat needs a swap.
- Report matrix: stable columns with the metric-bearing tests pinned
first (usbtest, cdc_msc_throughput, msc_file_explorer[_freertos]),
the rest alphabetical.
Fail fast:
- enum wait budget 8 s on the first attempt, 4 s on retries; dfu waits
are deadline-based so dfu-util's own runtime counts against the
budget.
A device-absent failure now costs ~3-5x a passing test (20-30 s)
instead of 10-30x (47-150 s).
- CI runs hil_test with --retry 1 and no in-run second pass: a broken
fixture fails the job fast instead of holding the self-hosted runner
for hours and blocking other PRs' HIL jobs. hil_test still writes the
.skip sidecar, so a manual re-run attempt only retests what failed.
Review fixes (multi-agent adversarial review of this commit):
- tinyusb_win_usbser.inf: the PID rework moved five CDC examples onto
even PIDs the INF's odd-only DeviceList never matched (legacy-Windows
usbser binding) - appended 0x4006/4008/400a/4020/4022 to both lists.
- usbtest example: USBTEST_TIER is now overridable and the descriptors
and pumps are tier-conditional, so a board whose DCD cannot serve a
tier lowers it instead of skipping the whole example - RA2A1 (RUSB2
with no isochronous pipe) builds at tier 3 via its BOARD_ define; the
host battery follows the tier advertised in bcdDevice. Tier-4 output
verified byte-identical after the refactor.
- dynamic_configuration's second config derived USB_PID + 11 = 0x4018,
colliding with net_lwip_webserver - now USB_PID + 0x0100, outside the
per-example space. tools/check_example_pids.py (pre-commit hook)
enforces PID uniqueness incl. derived and literal idProduct values.
- usbtest.py firmware gate: matched by device ID (uPD720201/720202,
both use the 0x6c FW register), and an unreadable version (setpci
missing/denied) now refuses with its own message instead of
masquerading as "firmware 0x00000000"; noted the gate is necessary
but not sufficient (board-specific kills stay per-board skips).
- hil_test: deadline waits use time.monotonic(); multiprocessing
context pinned to fork (raw semaphores in Pool initargs); flash and
usbtest permits unified into one fail-closed, exception-safe
ctrl_permit (unknown controller takes every slot and logs a warning
instead of silently borrowing slot 0); an all-skipped battery
reports as skip, not "0/0" failure; slow-body polls (mtp, printer,
disk read) go through a shared deadline-based wait_until so their
bodies count against the enum budget; throughput's FS detection
compares serials case-insensitively like every other walk; a missing
MSC read-speed line now fails the host msc_file_explorer test
instead of passing with an empty metric.
Hardening:
- fail fast (15 s) when a driver-registry sysfs write blocks: a wedged
device otherwise turns every subsequent battery into an unkillable
D-state writer and silently hangs the whole run
- usb-recover skill: a VM reboot is not a reliable cure (MosChip hubs
latch up across the PCIe reset); full host power cycle is
Co-Authored-By: Claude Fable 5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HeF2gZ1M7GWkz6Av4BpKPg
|
|
CFG_TUD_MSC_EP_BUFSIZE: 4096 → (HS ? 4096 : 1024). Keep the big buffer for
HS where it actually amortises CBW overhead at iperf-class throughput; FS
peaks around ~830 kBps so 1 KB is plenty and the example now fits on
small-RAM MCUs (lpc11/13, samd11, kinetis_kl, stm32f0/l0, stm32f1, etc.).
Also dedupe CDC_TX_BUFSIZE = CDC_RX_BUFSIZE.
Drops the previously-needed skip.txt — verified builds locally on
lpcxpresso1347, cynthion_d11, lpcxpresso11u37/u68, stm32f072disco/eval,
frdm_kl25z, stm32l052dap52.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
