| Age | Commit message (Collapse) | Author |
|---|
|
From a second max-effort review of the branch:
- Drop the dead TUSB_XFER_ISOCHRONOUS case in dcd_edpt_open: iso endpoints
are armed via dcd_edpt_iso_alloc/activate (TUP_DCD_EDPT_ISO_ALLOC is
defined for this IP), never through dcd_edpt_open, so the case and its
dd->isochronous assignment were unreachable and asserted a false
invariant. Only bulk/interrupt reach the switch now.
- Extend the iso compile gate to the classes that actually arm an iso
endpoint: DCD_ISO_ENABLED now includes CFG_TUD_BTH (bth_device.c opens
an iso voice endpoint). Without it a BTH build would compile the iso
machinery out and fail SET_INTERFACE at runtime.
- Un-skip LPC175X_6X in the usbtest example: it shares dcd_lpc17_40.c with
LPC40XX verbatim, so the "DCD has no isochronous support" skip reason no
longer holds. Build-verified for lpcxpresso1769 (previously blocked by
the skip).
- TU_ATTR_UNUSED on the ep_id_is_iso helper: every caller is under
#if DCD_ISO_ENABLED, so non-iso builds don't reference it and clang's
-Wunused-function (fatal in CI) rejected the build — gcc stays quiet.
Verified with the full lpc17 and lpc40 example sets under arm-clang.
A fifth finding — bounding control_ep_read's PACKET_READY spin with a
timeout — was implemented and REVERTED: a naive 100k-iteration bound fires
on legitimately-slow control reads and intermittently drops the device
(hardware-proven by interleaved A/B testing against the pre-fix binary).
The infinite wait is retained; the read is only reached once out_received/
out_queued signal data is present, so the theoretical IRQ-off hang is not
reachable in practice.
Re-verified on ea4088_quickstart: usbtest 30/30 (repeated) + HIL 14/14.
|
|
EP0 control-OUT fix (usbtest 14/21, errno 110/-74): usbd queues the
status-stage OUT ZLP of every control read with buffer=NULL, so the ISR's
`if (out_buffer)` check missed it and marked the arriving ZLP as
out_received instead. The stale flag poisoned the next control-OUT with
data: its first chunk "completed" instantly from an empty EP0 buffer and
the host's real DATA NAKed forever. Track queued transfers with an
explicit out_queued flag and void half-finished control state on a new
SETUP.
Isochronous support (UM10562 12.15.6): 5-word DMA descriptors with
per-packet size memory, buflen/present_count in packets, one packet per
FRAME (no DMARSet/EpIntEn involvement), completion at EOT for both
directions. Details that matter:
- the iso machinery (5th DD word + packet-size memory) is compiled only
when an iso-capable class is enabled (CFG_TUD_AUDIO/VIDEO/VENDOR), so
non-iso builds pay nothing: _dcd stays 648 B vs 1032 B with iso
- ISR dispatch keys on the hardware's fixed ep-number/type map
(ep_id_is_iso), never on dd fields that thread mode rebuilds
- iso OUT honors Packet_valid (bit 16) and prefills the hardware
writeback slots with 0, so a missed frame counts as 0 bytes instead of
reading back stale buffer contents as data
- packet count is validated (tu_div_ceil <= ISO_MAX_PACKETS) before the
DD is touched, so an oversized transfer is refused without leaving a
serviceable half-built descriptor armed for the frame engine
- dcd_edpt_iso_alloc and iso_activate both enforce the fixed iso endpoint
numbers (3/6/9/12); classes ignore alloc's return value, so activate
must not trust it
Un-skip LPC40XX in the usbtest example; tier 4 now enumerates and passes
iso cases 15/16/22/23. cdc_msc_throughput and printer_to_cdc had bulk on
iso-only EP3 (SET_CONFIGURATION failed with -32); add the LPC17/40 EPNUM
block (bulk on EP2/EP5) like other fixed-EP examples.
Verified on ea4088_quickstart: usbtest tier-4 battery 30/30 repeatedly
and the full device HIL suite 14/14 (incl. audio_test iso).
|
|
Gadget-Zero style source/sink on a vendor interface (alt0 empty, alt1
bulk+int+iso) plus EP0 ctrl_out; tier advertised in bcdDevice.
Co-Authored-By: Claude Fable 5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HeF2gZ1M7GWkz6Av4BpKPg
|
