blob: ae9cd55f1645e862af2180ef91c6eb3c4c2e4f36 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
|
Device specific known issues and workarounds
===============================================
This page lists known issues and workarounds for specific devices.
NXP LPC54600
----------------
**Severity: High**
**Not recommended for USB device applications (except high-speed host controller)**
Reference: `LPC54600 Errata Sheet`_
.. _LPC54600 Errata Sheet: https://www.nxp.com/docs/en/errata/ES_LPC546XX.pdf
The LPC54600 series have a very buggy USB controller, with 17 issues listed in the errata which is more than half of the total issues.
Most severe issues are:
- USB.2: In USB high-speed device mode, the NBytes field is not correct after BULK IN transfer
- USB.5: In USB full-speed host mode, linked list on done queue is broken.
- USB.15: USB high-speed device in endpoint TX data corruption
WCH CH32F20x/CH32V20x/CH32V30x
---------------------------------
**Severity: Medium**
**Not recommended for USB audio applications**
Reference: `CH32V30X Reference Manual`_ USBFS/USBHS controller chapter
.. _CH32V30X Reference Manual: https://www.wch-ic.com/downloads/CH32FV2x_V3xRM_PDF.html
Data corruption may occur on isochronous endpoints. Due to the lacking of FIFO for interrupt status registers, later completed transfer will overwrite `INT_ST` and `RX_LEN` register if previous transfer processing is not completed.
Other types of transfers are not affected.
|
