blob: b0d1e5d97d265351b55b95c57be597ce59b2b50c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
# CDC Dual Ports
Enumerates as a USB device with two independent CDC virtual serial ports.
## What it does
- Exposes two CDC virtual COM ports.
- Echoes back any data received on either port to **both** ports: the first port echoes as lower case, the second as upper case.
- Sends a UART state notification (toggles the DSR line) on each press of the on-board button.
- Resets the board into the bootloader when the first port is opened at 1200 bps and then disconnected (touch-1200 trigger).
- Blinks the on-board LED: 250 ms when unmounted, 1000 ms when mounted.
## USB Descriptors
| Interface | Class driver |
|-----------|--------------|
| 0–1 | CDC (virtual serial port 1) |
| 2–3 | CDC (virtual serial port 2) |
## Configuration
Notable `tusb_config.h` settings:
```c
#define CFG_TUD_CDC 2 // two CDC ports
#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
```
## Building
CMake:
```bash
mkdir build && cd build
cmake -DBOARD=raspberry_pi_pico ..
cmake --build .
```
Make:
```bash
make BOARD=raspberry_pi_pico all
```
## Try it
After flashing, two serial ports appear on the host (e.g. `/dev/ttyACM0` and `/dev/ttyACM1` on Linux). Open either one in a terminal and type: characters come back lower-cased on the first port and upper-cased on the second.
|
