1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
|
/**
**************************************************************************
* @file at32f413_clock.c
* @brief system clock config program
**************************************************************************
* Copyright notice & Disclaimer
*
* The software Board Support Package (BSP) that is made available to
* download from Artery official website is the copyrighted work of Artery.
* Artery authorizes customers to use, copy, and distribute the BSP
* software and its related documentation for the purpose of design and
* development in conjunction with Artery microcontrollers. Use of the
* software is governed by this copyright notice and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
*
**************************************************************************
*/
/* includes ------------------------------------------------------------------*/
#include "at32f413_clock.h"
/**
* @brief system clock config program
* @note the system clock is configured as follow:
* system clock (sclk) = hext / 2 * pll_mult
* system clock source = pll (hext)
* - hext = HEXT_VALUE
* - sclk = 192000000
* - ahbdiv = 1
* - ahbclk = 192000000
* - apb2div = 2
* - apb2clk = 96000000
* - apb1div = 2
* - apb1clk = 96000000
* - pll_mult = 48
* - pll_range = GT72MHZ (greater than 72 mhz)
* @param none
* @retval none
*/
void system_clock_config(void)
{
/* reset crm */
crm_reset();
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */
while(crm_hext_stable_wait() == ERROR)
{
}
/* config pll clock resource */
crm_pll_config(CRM_PLL_SOURCE_HEXT_DIV, CRM_PLL_MULT_48, CRM_PLL_OUTPUT_RANGE_GT72MHZ);
/* enable pll */
crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
/* wait till pll is ready */
while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
{
}
/* config ahbclk */
crm_ahb_div_set(CRM_AHB_DIV_1);
/* config apb2clk, the maximum frequency of APB1/APB2 clock is 100 MHz */
crm_apb2_div_set(CRM_APB2_DIV_2);
/* config apb1clk, the maximum frequency of APB1/APB2 clock is 100 MHz */
crm_apb1_div_set(CRM_APB1_DIV_2);
/* enable auto step mode */
crm_auto_step_mode_enable(TRUE);
/* select pll as system clock source */
crm_sysclk_switch(CRM_SCLK_PLL);
/* wait till pll is used as system clock source */
while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
{
}
/* disable auto step mode */
crm_auto_step_mode_enable(FALSE);
/* update system_core_clock global variable */
system_core_clock_update();
}
|
