1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
|
MSDK_LIB = hw/mcu/analog/msdk/Libraries
# Add any board specific make rules
include $(TOP)/$(BOARD_PATH)/board.mk
CPU_CORE ?= cortex-m4
PORT ?= 0
JLINK_DEVICE = ${MAX_DEVICE}
MAX_DEVICE_UPPER = $(call to_upper,${MAX_DEVICE})
ifeq ($(MAX_DEVICE),max32650)
PERIPH_ID = 10
PERIPH_SUFFIX = me
endif
ifneq ($(filter $(MAX_DEVICE),max32665 max32666),)
PERIPH_ID = 14
PERIPH_SUFFIX = me
endif
ifeq ($(MAX_DEVICE),max32690)
PERIPH_ID = 18
PERIPH_SUFFIX = me
endif
ifeq ($(MAX_DEVICE),max78002)
PERIPH_ID = 87
PERIPH_SUFFIX = ai
endif
ifndef PERIPH_ID
$(error Unsupported MAX device: ${MAX_DEVICE})
endif
# Configure the flash rule. By default, use JLink.
SIGNED_BUILD ?= 0
DEFAULT_FLASH = flash-jlink
# --------------
# Compiler Flags
# --------------
CFLAGS += \
-DTARGET=${MAX_DEVICE_UPPER}\
-DTARGET_REV=0x4131 \
-DMXC_ASSERT_ENABLE \
-D${MAX_DEVICE_UPPER} \
-DIAR_PRAGMAS=0 \
-DMAX_PERIPH_ID=${PERIPH_ID} \
-DCFG_TUSB_MCU=OPT_MCU_${MAX_DEVICE_UPPER} \
-DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
# mcu driver cause following warnings
CFLAGS += \
-Wno-error=old-style-declaration \
-Wno-error=redundant-decls \
-Wno-error=strict-prototypes \
-Wno-error=unused-parameter \
-Wno-error=cast-align \
-Wno-error=cast-qual \
-Wno-error=sign-compare \
-Wno-error=enum-conversion \
LDFLAGS += -nostartfiles --specs=nosys.specs --specs=nano.specs
LD_FILE ?= $(FAMILY_PATH)/linker/${MAX_DEVICE}.ld
# If the applications needs to be signed (for the MAX32651), sign it first and
# then need to use MSDK's OpenOCD to flash it
# Also need to include the __SLA_FWK__ define to enable the signed header into
# memory
ifeq ($(SIGNED_BUILD), 1)
# Extra definitions to build for the secure part
CFLAGS += -D__SLA_FWK__
DEFAULT_FLASH := sign-build flash-msdk
endif
# -----------------
# Sources & Include
# -----------------
# common
SRC_C += \
src/portable/mentor/musb/dcd_musb.c \
${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/heap.c \
${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/system_${MAX_DEVICE}.c \
${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_assert.c \
${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_delay.c \
${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_lock.c \
${MSDK_LIB}/PeriphDrivers/Source/SYS/nvic_table.c \
${MSDK_LIB}/PeriphDrivers/Source/SYS/pins_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/SYS/sys_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_common.c \
${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_reva.c \
${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_common.c \
${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_reva.c \
${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_reva.c \
${MSDK_LIB}/PeriphDrivers/Source/UART/uart_common.c \
${MSDK_LIB}/PeriphDrivers/Source/UART/uart_${PERIPH_SUFFIX}${PERIPH_ID}.c \
SRC_S += ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/GCC/startup_${MAX_DEVICE}.S
INC += \
$(TOP)/$(BOARD_PATH) \
$(TOP)/${MSDK_LIB}/CMSIS/5.9.0/Core/Include \
$(TOP)/${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Include \
$(TOP)/${MSDK_LIB}/PeriphDrivers/Include/${MAX_DEVICE_UPPER} \
$(TOP)/${MSDK_LIB}/PeriphDrivers/Source/SYS \
$(TOP)/${MSDK_LIB}/PeriphDrivers/Source/GPIO \
$(TOP)/${MSDK_LIB}/PeriphDrivers/Source/ICC \
$(TOP)/${MSDK_LIB}/PeriphDrivers/Source/FLC \
$(TOP)/${MSDK_LIB}/PeriphDrivers/Source/UART \
# device specific
ifneq ($(filter $(MAX_DEVICE),max32650 max32665 max32666),)
SRC_C += \
${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_common.c \
${MSDK_LIB}/PeriphDrivers/Source/TPU/tpu_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/TPU/tpu_reva.c \
${MSDK_LIB}/PeriphDrivers/Source/UART/uart_reva.c \
INC += $(TOP)/${MSDK_LIB}/PeriphDrivers/Source/TPU
endif
ifeq (${MAX_DEVICE},max32690)
SRC_C += \
${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_reva.c \
${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_common.c \
${MSDK_LIB}/PeriphDrivers/Source/UART/uart_revb.c \
INC += ${TOP}/${MSDK_LIB}/PeriphDrivers/Source/CTB
endif
ifeq (${MAX_DEVICE},max78002)
SRC_C += \
${MSDK_LIB}/PeriphDrivers/Source/AES/aes_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/AES/aes_revb.c \
${MSDK_LIB}/PeriphDrivers/Source/TRNG/trng_${PERIPH_SUFFIX}${PERIPH_ID}.c \
${MSDK_LIB}/PeriphDrivers/Source/TRNG/trng_revb.c \
${MSDK_LIB}/PeriphDrivers/Source/UART/uart_revb.c \
INC += \
${TOP}/${MSDK_LIB}/PeriphDrivers/Source/AES \
${TOP}/${MSDK_LIB}/PeriphDrivers/Source/TRNG
endif
# The MAX32651EVKIT is pin for pin identical to the MAX32650EVKIT, however the
# MAX32651 has a secure bootloader which requires the image to be signed before
# loading into flash. All MAX32651EVKIT's have the same key for evaluation
# purposes, so create a special flash rule to sign the binary and flash using
# the MSDK.
MCU_PATH = $(TOP)/hw/mcu/analog/msdk/
# Assume no extension for sign utility
SIGN_EXE = sign_app
ifeq ($(OS), Windows_NT)
# Must use .exe extension on Windows, since the binaries
# for Linux may live in the same place.
SIGN_EXE := sign_app.exe
else
UNAME = $(shell uname -s)
ifneq ($(findstring MSYS_NT,$(UNAME)),)
# Must also use .exe extension for MSYS2
SIGN_EXE := sign_app.exe
endif
endif
# Rule to sign the build. This will in-place modify the existing .elf file
# an populate the .sig section with the signature value
sign-build: $(BUILD)/$(PROJECT).elf
$(OBJCOPY) $(BUILD)/$(PROJECT).elf -R .sig -O binary $(BUILD)/$(PROJECT).bin
$(MCU_PATH)/Tools/SBT/bin/$(SIGN_EXE) -c MAX32651 \
key_file="$(MCU_PATH)/Tools/SBT/devices/MAX32651/keys/maximtestcrk.key" \
ca=$(BUILD)/$(PROJECT).bin sca=$(BUILD)/$(PROJECT).sbin
$(OBJCOPY) $(BUILD)/$(PROJECT).elf --update-section .sig=$(BUILD)/$(PROJECT).sig
# Optional flash option when running within an installed MSDK to use OpenOCD
# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated.
# If the MSDK is installed, flash-msdk can be run to utilize the the modified
# openocd with the algorithms
MAXIM_PATH := $(subst \,/,$(MAXIM_PATH))
flash-msdk: $(BUILD)/$(PROJECT).elf
$(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \
-f interface/cmsis-dap.cfg -f target/max32650.cfg \
-c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit"
# Configure the flash rule
flash: $(DEFAULT_FLASH)
|
