path: root/src/host/usbh.c

/* 
 * The MIT License (MIT)
 *
 * Copyright (c) 2019 Ha Thach (tinyusb.org)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 * This file is part of the TinyUSB stack.
 */

#include "common/tusb_common.h"

#if TUSB_OPT_HOST_ENABLED

#ifndef CFG_TUH_TASK_QUEUE_SZ
#define CFG_TUH_TASK_QUEUE_SZ   16
#endif

//--------------------------------------------------------------------+
// INCLUDE
//--------------------------------------------------------------------+
#include "tusb.h"
#include "hub.h"
#include "usbh_hcd.h"

//--------------------------------------------------------------------+
// MACRO CONSTANT TYPEDEF
//--------------------------------------------------------------------+
static host_class_driver_t const usbh_class_drivers[] =
{
  #if CFG_TUH_CDC
    {
      .class_code = TUSB_CLASS_CDC,
      .init       = cdch_init,
      .open       = cdch_open,
      .isr        = cdch_isr,
      .close      = cdch_close
    },
  #endif

  #if CFG_TUH_MSC
    {
      .class_code = TUSB_CLASS_MSC,
      .init       = msch_init,
      .open       = msch_open,
      .isr        = msch_isr,
      .close      = msch_close
    },
  #endif

  #if HOST_CLASS_HID
    {
      .class_code = TUSB_CLASS_HID,
      .init       = hidh_init,
      .open       = hidh_open_subtask,
      .isr        = hidh_isr,
      .close      = hidh_close
    },
  #endif

  #if CFG_TUH_HUB
    {
      .class_code = TUSB_CLASS_HUB,
      .init       = hub_init,
      .open       = hub_open,
      .isr        = hub_isr,
      .close      = hub_close
    },
  #endif

  #if CFG_TUSB_HOST_CUSTOM_CLASS
    {
      .class_code = TUSB_CLASS_VENDOR_SPECIFIC,
      .init       = cush_init,
      .open       = cush_open_subtask,
      .isr        = cush_isr,
      .close      = cush_close
    }
  #endif
};

enum { USBH_CLASS_DRIVER_COUNT = TU_ARRAY_SZIE(usbh_class_drivers) };

//--------------------------------------------------------------------+
// INTERNAL OBJECT & FUNCTION DECLARATION
//--------------------------------------------------------------------+

// including zero-address
CFG_TUSB_MEM_SECTION usbh_device_t _usbh_devices[CFG_TUSB_HOST_DEVICE_MAX+1];

// Event queue
// role device/host is used by OS NONE for mutex (disable usb isr) only
OSAL_QUEUE_DEF(OPT_MODE_HOST, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t);
static osal_queue_t _usbh_q;

CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(4) static uint8_t _usbh_ctrl_buf[CFG_TUSB_HOST_ENUM_BUFFER_SIZE];

//------------- Reporter Task Data -------------//

//------------- Helper Function Prototypes -------------//
static inline uint8_t get_new_address(void);
static inline uint8_t get_configure_number_for_device(tusb_desc_device_t* dev_desc);
static void mark_interface_endpoint(uint8_t ep2drv[8][2], uint8_t const* p_desc, uint16_t desc_len, uint8_t driver_id);

//--------------------------------------------------------------------+
// PUBLIC API (Parameter Verification is required)
//--------------------------------------------------------------------+
tusb_device_state_t tuh_device_get_state (uint8_t const dev_addr)
{
  TU_ASSERT( dev_addr <= CFG_TUSB_HOST_DEVICE_MAX, TUSB_DEVICE_STATE_UNPLUG);
  return (tusb_device_state_t) _usbh_devices[dev_addr].state;
}

//--------------------------------------------------------------------+
// CLASS-USBD API (don't require to verify parameters)
//--------------------------------------------------------------------+
bool usbh_init(void)
{
  tu_memclr(_usbh_devices, sizeof(usbh_device_t)*(CFG_TUSB_HOST_DEVICE_MAX+1));

  //------------- Enumeration & Reporter Task init -------------//
  _usbh_q = osal_queue_create( &_usbh_qdef );
  TU_ASSERT(_usbh_q != NULL);

  //------------- Semaphore, Mutex for Control Pipe -------------//
  for(uint8_t i=0; i<CFG_TUSB_HOST_DEVICE_MAX+1; i++) // including address zero
  {
    usbh_device_t * const dev = &_usbh_devices[i];

    dev->control.sem_hdl = osal_semaphore_create(&dev->control.sem_def);
    TU_ASSERT(dev->control.sem_hdl != NULL);

    dev->control.mutex_hdl = osal_mutex_create(&dev->control.mutex_def);
    TU_ASSERT(dev->control.mutex_hdl != NULL);

    memset(dev->itf2drv, 0xff, sizeof(dev->itf2drv)); // invalid mapping
    memset(dev->ep2drv , 0xff, sizeof(dev->ep2drv )); // invalid mapping
  }

  // Class drivers init
  for (uint8_t drv_id = 0; drv_id < USBH_CLASS_DRIVER_COUNT; drv_id++) usbh_class_drivers[drv_id].init();

  TU_ASSERT(hcd_init());
  hcd_int_enable(TUH_OPT_RHPORT);

  return true;
}

//------------- USBH control transfer -------------//
bool usbh_control_xfer (uint8_t dev_addr, tusb_control_request_t* request, uint8_t* data)
{
  usbh_device_t* dev = &_usbh_devices[dev_addr];
  const uint8_t rhport = dev->rhport;

  TU_ASSERT(osal_mutex_lock(dev->control.mutex_hdl, OSAL_TIMEOUT_NORMAL));

  dev->control.request = *request;
  dev->control.pipe_status = 0;

  // Setup Stage
  hcd_setup_send(rhport, dev_addr, (uint8_t*) &dev->control.request);
  TU_VERIFY(osal_semaphore_wait(dev->control.sem_hdl, OSAL_TIMEOUT_NORMAL));

  // Data stage : first data toggle is always 1
  if ( request->wLength )
  {
    hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), data, request->wLength);
    TU_VERIFY(osal_semaphore_wait(dev->control.sem_hdl, OSAL_TIMEOUT_NORMAL));
  }

  // Status : data toggle is always 1
  hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, 1-request->bmRequestType_bit.direction), NULL, 0);
  TU_VERIFY(osal_semaphore_wait(dev->control.sem_hdl, OSAL_TIMEOUT_NORMAL));

  osal_mutex_unlock(dev->control.mutex_hdl);

  if ( XFER_RESULT_STALLED == dev->control.pipe_status ) return false;
  if ( XFER_RESULT_FAILED == dev->control.pipe_status ) return false;

  return true;
}

tusb_error_t usbh_pipe_control_open(uint8_t dev_addr, uint8_t max_packet_size)
{
  osal_semaphore_reset( _usbh_devices[dev_addr].control.sem_hdl );
  //osal_mutex_reset( usbh_devices[dev_addr].control.mutex_hdl );
      
  tusb_desc_endpoint_t ep0_desc =
  {
    .bLength          = sizeof(tusb_desc_endpoint_t),
    .bDescriptorType  = TUSB_DESC_ENDPOINT,
    .bEndpointAddress = 0,
    .bmAttributes     = { .xfer = TUSB_XFER_CONTROL },
    .wMaxPacketSize   = { .size = max_packet_size },
    .bInterval        = 0
  };

  hcd_edpt_open(_usbh_devices[dev_addr].rhport, dev_addr, &ep0_desc);

  return TUSB_ERROR_NONE;
}

//--------------------------------------------------------------------+
// USBH-HCD ISR/Callback API
//--------------------------------------------------------------------+
// interrupt caused by a TD (with IOC=1) in pipe of class class_code
void hcd_event_xfer_complete(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes)
{
  usbh_device_t* dev = &_usbh_devices[ dev_addr ];

  if (0 == tu_edpt_number(ep_addr))
  {
    dev->control.pipe_status   = event;
//    usbh_devices[ pipe_hdl.dev_addr ].control.xferred_bytes = xferred_bytes; not yet neccessary
    osal_semaphore_post( dev->control.sem_hdl, true );
  }
  else
  {
    uint8_t drv_id = dev->ep2drv[tu_edpt_number(ep_addr)][tu_edpt_dir(ep_addr)];
    TU_ASSERT(drv_id < USBH_CLASS_DRIVER_COUNT, );

    if (usbh_class_drivers[drv_id].isr)
    {
      usbh_class_drivers[drv_id].isr(dev_addr, ep_addr, event, xferred_bytes);
    }
    else
    {
      TU_BREAKPOINT(); // something wrong, no one claims the isr's source
    }
  }
}

void hcd_event_device_attach(uint8_t rhport)
{
  hcd_event_t event =
  {
    .rhport = rhport,
    .event_id = HCD_EVENT_DEVICE_ATTACH
  };

  event.attach.hub_addr = 0;
  event.attach.hub_port = 0;

  hcd_event_handler(&event, true);
}

void hcd_event_handler(hcd_event_t const* event, bool in_isr)
{
  switch (event->event_id)
  {
    default:
      osal_queue_send(_usbh_q, event, in_isr);
    break;
  }
}

void hcd_event_device_remove(uint8_t hostid)
{
  hcd_event_t event =
  {
    .rhport = hostid,
    .event_id = HCD_EVENT_DEVICE_REMOVE
  };

  event.attach.hub_addr = 0;
  event.attach.hub_port = 0;

  hcd_event_handler(&event, true);
}


// a device unplugged on hostid, hub_addr, hub_port
// return true if found and unmounted device, false if cannot find
static void usbh_device_unplugged(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port)
{
  //------------- find the all devices (star-network) under port that is unplugged -------------//
  for (uint8_t dev_addr = 0; dev_addr <= CFG_TUSB_HOST_DEVICE_MAX; dev_addr ++)
  {
    usbh_device_t* dev = &_usbh_devices[dev_addr];

    // TODO Hub multiple level
    if (dev->rhport == rhport   &&
        (hub_addr == 0 || dev->hub_addr == hub_addr) && // hub_addr == 0 & hub_port == 0 means roothub
        (hub_port == 0 || dev->hub_port == hub_port) &&
        dev->state    != TUSB_DEVICE_STATE_UNPLUG)
    {
      // Invoke callback before close driver
      if (tuh_umount_cb) tuh_umount_cb(dev_addr);

      // Close class driver
      for (uint8_t drv_id = 0; drv_id < USBH_CLASS_DRIVER_COUNT; drv_id++) usbh_class_drivers[drv_id].close(dev_addr);

      memset(dev->itf2drv, 0xff, sizeof(dev->itf2drv)); // invalid mapping
      memset(dev->ep2drv , 0xff, sizeof(dev->ep2drv )); // invalid mapping

      hcd_device_close(rhport, dev_addr);

      dev->state = TUSB_DEVICE_STATE_UNPLUG;
    }
  }
}

//--------------------------------------------------------------------+
// ENUMERATION TASK
//--------------------------------------------------------------------+

bool enum_task(hcd_event_t* event)
{
  enum {
#if 1
    // FIXME ohci LPC1769 xpresso + debugging to have 1st control xfer to work, some kind of timing or ohci driver issue !!!
    POWER_STABLE_DELAY = 100,
    RESET_DELAY        = 500
#else
    POWER_STABLE_DELAY = 500,
    RESET_DELAY        = 200, // USB specs say only 50ms but many devices require much longer
#endif
  };

  // for OSAL_NONE local variable won't retain value after blocking service sem_wait/queue_recv
  static uint8_t configure_selected = 1; // TODO move

  usbh_device_t* dev0 = &_usbh_devices[0];
  tusb_control_request_t request;

  dev0->rhport  = event->rhport; // TODO refractor integrate to device_pool
  dev0->hub_addr = event->attach.hub_addr;
  dev0->hub_port = event->attach.hub_port;
  dev0->state    = TUSB_DEVICE_STATE_UNPLUG;

  //------------- connected/disconnected directly with roothub -------------//
  if ( dev0->hub_addr == 0)
  {
    if( hcd_port_connect_status(dev0->rhport) )
    {
      // connection event
      osal_task_delay(POWER_STABLE_DELAY); // wait until device is stable. Increase this if the first 8 bytes is failed to get

      // exit if device unplugged while delaying
      if ( !hcd_port_connect_status(dev0->rhport) ) return true;

      hcd_port_reset( dev0->rhport ); // port must be reset to have correct speed operation
      osal_task_delay(RESET_DELAY);

      dev0->speed = hcd_port_speed_get( dev0->rhport );
    }
    else
    {
      // disconnection event
      usbh_device_unplugged(dev0->rhport, 0, 0);
      return true; // restart task
    }
  }
  #if CFG_TUH_HUB
  //------------- connected/disconnected via hub -------------//
  else
  {
    //------------- Get Port Status -------------//
    request = (tusb_control_request_t ) {
          .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_OTHER, .type = TUSB_REQ_TYPE_CLASS, .direction = TUSB_DIR_IN },
          .bRequest = HUB_REQUEST_GET_STATUS,
          .wValue = 0,
          .wIndex = dev0->hub_port,
          .wLength = 4
    };
    // TODO hub refractor
    TU_VERIFY_HDLR( usbh_control_xfer( dev0->hub_addr, &request, _usbh_ctrl_buf ), hub_status_pipe_queue( dev0->hub_addr) );

    // Acknowledge Port Connection Change
    hub_port_clear_feature_subtask(dev0->hub_addr, dev0->hub_port, HUB_FEATURE_PORT_CONNECTION_CHANGE);

    hub_port_status_response_t * p_port_status;
    p_port_status = ((hub_port_status_response_t *) _usbh_ctrl_buf);

    if ( ! p_port_status->status_change.connect_status )   return true; // only handle connection change

    if ( ! p_port_status->status_current.connect_status )
    {
      // Disconnection event
      usbh_device_unplugged(dev0->rhport, dev0->hub_addr, dev0->hub_port);

      (void) hub_status_pipe_queue( dev0->hub_addr ); // done with hub, waiting for next data on status pipe
      return true; // restart task
    }
    else
    {
      // Connection Event
      TU_VERIFY_HDLR(hub_port_reset_subtask(dev0->hub_addr, dev0->hub_port),
                     hub_status_pipe_queue( dev0->hub_addr) ); // TODO hub refractor

      dev0->speed = hub_port_get_speed();

      // Acknowledge Port Reset Change
      hub_port_clear_feature_subtask(dev0->hub_addr, dev0->hub_port, HUB_FEATURE_PORT_RESET_CHANGE);
    }
  }
  #endif

  TU_ASSERT_ERR( usbh_pipe_control_open(0, 8) );

  //------------- Get first 8 bytes of device descriptor to get Control Endpoint Size -------------//
  request = (tusb_control_request_t ) {
        .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_DEVICE, .type = TUSB_REQ_TYPE_STANDARD, .direction = TUSB_DIR_IN },
        .bRequest = TUSB_REQ_GET_DESCRIPTOR,
        .wValue = TUSB_DESC_DEVICE << 8,
        .wIndex = 0,
        .wLength = 8
  };
  bool is_ok = usbh_control_xfer(0, &request, _usbh_ctrl_buf);

  //------------- Reset device again before Set Address -------------//
  if (dev0->hub_addr == 0)
  {
    // connected directly to roothub
    TU_ASSERT(is_ok); // TODO some slow device is observed to fail the very fist controller xfer, can try more times
    hcd_port_reset( dev0->rhport ); // reset port after 8 byte descriptor
    osal_task_delay(RESET_DELAY);
  }
  #if CFG_TUH_HUB
  else
  {
    // connected via a hub
    TU_VERIFY_HDLR(is_ok, hub_status_pipe_queue( dev0->hub_addr) ); // TODO hub refractor

    if ( hub_port_reset_subtask(dev0->hub_addr, dev0->hub_port) )
    {
      // Acknowledge Port Reset Change if Reset Successful
      hub_port_clear_feature_subtask(dev0->hub_addr, dev0->hub_port, HUB_FEATURE_PORT_RESET_CHANGE);
    }

    (void) hub_status_pipe_queue( dev0->hub_addr ); // done with hub, waiting for next data on status pipe
  }
  #endif

  //------------- Set new address -------------//
  uint8_t const new_addr = get_new_address();
  TU_ASSERT(new_addr <= CFG_TUSB_HOST_DEVICE_MAX); // TODO notify application we reach max devices

  request = (tusb_control_request_t ) {
        .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_DEVICE, .type = TUSB_REQ_TYPE_STANDARD, .direction = TUSB_DIR_OUT },
        .bRequest = TUSB_REQ_SET_ADDRESS,
        .wValue = new_addr,
        .wIndex = 0,
        .wLength = 0
  };
  TU_ASSERT(usbh_control_xfer(0, &request, NULL));

  //------------- update port info & close control pipe of addr0 -------------//
  usbh_device_t* new_dev = &_usbh_devices[new_addr];
  new_dev->rhport  = dev0->rhport;
  new_dev->hub_addr = dev0->hub_addr;
  new_dev->hub_port = dev0->hub_port;
  new_dev->speed    = dev0->speed;

  hcd_device_close(dev0->rhport, 0); // close device 0
  dev0->state = TUSB_DEVICE_STATE_UNPLUG;

  // open control pipe for new address
  TU_ASSERT_ERR ( usbh_pipe_control_open(new_addr, ((tusb_desc_device_t*) _usbh_ctrl_buf)->bMaxPacketSize0 ) );

  //------------- Get full device descriptor -------------//
  request = (tusb_control_request_t ) {
        .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_DEVICE, .type = TUSB_REQ_TYPE_STANDARD, .direction = TUSB_DIR_IN },
        .bRequest = TUSB_REQ_GET_DESCRIPTOR,
        .wValue = TUSB_DESC_DEVICE << 8,
        .wIndex = 0,
        .wLength = 18
  };
  TU_ASSERT(usbh_control_xfer(new_addr, &request, _usbh_ctrl_buf));

  // update device info  TODO alignment issue
  new_dev->vendor_id       = ((tusb_desc_device_t*) _usbh_ctrl_buf)->idVendor;
  new_dev->product_id      = ((tusb_desc_device_t*) _usbh_ctrl_buf)->idProduct;
  new_dev->configure_count = ((tusb_desc_device_t*) _usbh_ctrl_buf)->bNumConfigurations;

  configure_selected = get_configure_number_for_device((tusb_desc_device_t*) _usbh_ctrl_buf);
  TU_ASSERT(configure_selected <= new_dev->configure_count); // TODO notify application when invalid configuration

  //------------- Get 9 bytes of configuration descriptor -------------//
  request = (tusb_control_request_t ) {
        .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_DEVICE, .type = TUSB_REQ_TYPE_STANDARD, .direction = TUSB_DIR_IN },
        .bRequest = TUSB_REQ_GET_DESCRIPTOR,
        .wValue = (TUSB_DESC_CONFIGURATION << 8) | (configure_selected - 1),
        .wIndex = 0,
        .wLength = 9
  };
  TU_ASSERT( usbh_control_xfer(new_addr, &request, _usbh_ctrl_buf));

  // TODO not enough buffer to hold configuration descriptor
  TU_ASSERT( CFG_TUSB_HOST_ENUM_BUFFER_SIZE >= ((tusb_desc_configuration_t*)_usbh_ctrl_buf)->wTotalLength );

  //------------- Get full configuration descriptor -------------//
  request.wLength = ((tusb_desc_configuration_t*)_usbh_ctrl_buf)->wTotalLength; // full length
  TU_ASSERT( usbh_control_xfer( new_addr, &request, _usbh_ctrl_buf ) );

  // update configuration info
  new_dev->interface_count = ((tusb_desc_configuration_t*) _usbh_ctrl_buf)->bNumInterfaces;

  //------------- Set Configure -------------//
  request = (tusb_control_request_t ) {
        .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_DEVICE, .type = TUSB_REQ_TYPE_STANDARD, .direction = TUSB_DIR_OUT },
        .bRequest = TUSB_REQ_SET_CONFIGURATION,
        .wValue = configure_selected,
        .wIndex = 0,
        .wLength = 0
  };
  TU_ASSERT(usbh_control_xfer( new_addr, &request, NULL ));

  new_dev->state = TUSB_DEVICE_STATE_CONFIGURED;

  //------------- TODO Get String Descriptors -------------//

  //------------- parse configuration & install drivers -------------//
  uint8_t const* p_desc = _usbh_ctrl_buf + sizeof(tusb_desc_configuration_t);

  // parse each interfaces
  while( p_desc < _usbh_ctrl_buf + ((tusb_desc_configuration_t*)_usbh_ctrl_buf)->wTotalLength )
  {
    // skip until we see interface descriptor
    if ( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) )
    {
      p_desc = tu_desc_next(p_desc); // skip the descriptor, increase by the descriptor's length
    }else
    {
      tusb_desc_interface_t* desc_itf = (tusb_desc_interface_t*) p_desc;

      // Check if class is supported
      uint8_t drv_id;
      for (drv_id = 0; drv_id < USBH_CLASS_DRIVER_COUNT; drv_id++)
      {
        if ( usbh_class_drivers[drv_id].class_code == desc_itf->bInterfaceClass ) break;
      }
      
      if( drv_id >= USBH_CLASS_DRIVER_COUNT )
      {
        // skip unsupported class
        p_desc = tu_desc_next(p_desc);
      }
      else
      {
        // Interface number must not be used already TODO alternate interface
        TU_ASSERT( new_dev->itf2drv[desc_itf->bInterfaceNumber] == 0xff );
        new_dev->itf2drv[desc_itf->bInterfaceNumber] = drv_id;

        if (desc_itf->bInterfaceClass == TUSB_CLASS_HUB && new_dev->hub_addr != 0)
        {
          // TODO Attach hub to Hub is not currently supported
          // skip this interface
          p_desc = tu_desc_next(p_desc);
        }
        else
        {
          uint16_t itf_len = 0;

          if ( usbh_class_drivers[drv_id].open(new_dev->rhport, new_addr, desc_itf, &itf_len) )
          {
            mark_interface_endpoint(new_dev->ep2drv, p_desc, itf_len, drv_id);
          }

          TU_ASSERT( itf_len >= sizeof(tusb_desc_interface_t) );
          p_desc += itf_len;
        }
      }
    }
  }

  if (tuh_mount_cb) tuh_mount_cb(new_addr);

  return true;
}

/* USB Host Driver task
 * This top level thread manages all host controller event and delegates events to class-specific drivers.
 * This should be called periodically within the mainloop or rtos thread.
 *
   @code
    int main(void)
    {
      application_init();
      tusb_init();

      while(1) // the mainloop
      {
        application_code();

        tuh_task(); // tinyusb host task
      }
    }
    @endcode
 */
void tuh_task(void)
{
  // Skip if stack is not initialized
  if ( !tusb_inited() ) return;

  // Loop until there is no more events in the queue
  while (1)
  {
    hcd_event_t event;
    if ( !osal_queue_receive(_usbh_q, &event) ) return;

    switch (event.event_id)
    {
      case HCD_EVENT_DEVICE_ATTACH:
      case HCD_EVENT_DEVICE_REMOVE:
        enum_task(&event);
      break;

      default: break;
    }
  }
}

//--------------------------------------------------------------------+
// INTERNAL HELPER
//--------------------------------------------------------------------+
static inline uint8_t get_new_address(void)
{
  for (uint8_t addr=1; addr <= CFG_TUSB_HOST_DEVICE_MAX; addr++)
  {
    if (_usbh_devices[addr].state == TUSB_DEVICE_STATE_UNPLUG) return addr;
  }
  return CFG_TUSB_HOST_DEVICE_MAX+1;
}

static inline uint8_t get_configure_number_for_device(tusb_desc_device_t* dev_desc)
{
  uint8_t config_num = 1;

  // invoke callback to ask user which configuration to select
  if (tuh_device_attached_cb)
  {
    config_num = tu_min8(1, tuh_device_attached_cb(dev_desc) );
  }

  return config_num;
}

// Helper marking endpoint of interface belongs to class driver
// TODO merge with usbd
static void mark_interface_endpoint(uint8_t ep2drv[8][2], uint8_t const* p_desc, uint16_t desc_len, uint8_t driver_id)
{
  uint16_t len = 0;

  while( len < desc_len )
  {
    if ( TUSB_DESC_ENDPOINT == tu_desc_type(p_desc) )
    {
      uint8_t const ep_addr = ((tusb_desc_endpoint_t const*) p_desc)->bEndpointAddress;

      ep2drv[ tu_edpt_number(ep_addr) ][ tu_edpt_dir(ep_addr) ] = driver_id;
    }

    len   += tu_desc_len(p_desc);
    p_desc = tu_desc_next(p_desc);
  }
}


#endif