diff options
| author | Tanmay Kathpalia <[email protected]> | 2025-12-15 03:01:14 -0800 |
|---|---|---|
| committer | Tien Fong Chee <[email protected]> | 2025-12-17 16:15:31 +0800 |
| commit | 029e6f250cd5caa166f37c5bbb3d00af2cff9baf (patch) | |
| tree | 3dc9611927ca717dc61e7c0be74dc2c8f473dfff | |
| parent | 85a3ee15e0363fafe221de4c57cb62e59f920914 (diff) | |
Revert "arch: arm: dts: agilex5: Set SDIO_SEL GPIO pin as output"
Remove GPIO hog configuration for SDIO_SEL pin as it is now handled
through the voltage regulator framework for SD ultra high speed mode
support. The GPIO pin 3 on portb controller is used to control the
level shifter for SD card I/O voltage switching.
The regulator-based approach provides proper voltage switching control
for UHS-I modes (SDR50, SDR104) while maintaining compatibility with
the MMC subsystem's voltage switching protocols.
This reverts commit b0dbc9fcb7dfb7522be25ee205997be2fb5e1bdc.
Signed-off-by: Tanmay Kathpalia <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
| -rw-r--r-- | arch/arm/dts/socfpga_agilex5-u-boot.dtsi | 11 | ||||
| -rw-r--r-- | configs/socfpga_agilex5_defconfig | 3 |
2 files changed, 0 insertions, 14 deletions
diff --git a/arch/arm/dts/socfpga_agilex5-u-boot.dtsi b/arch/arm/dts/socfpga_agilex5-u-boot.dtsi index d51a9e2ff7f..35b198b79ef 100644 --- a/arch/arm/dts/socfpga_agilex5-u-boot.dtsi +++ b/arch/arm/dts/socfpga_agilex5-u-boot.dtsi @@ -681,17 +681,6 @@ bootph-all; }; -&gpio1 { - /* Configure GPIO 1 pin 3 as output pin with value 0 during GPIO probe */ - portb: gpio-controller@0{ - sdio_sel { - gpio-hog; - gpios = <3 GPIO_ACTIVE_HIGH>; - output-low; - }; - }; -}; - &i2c0 { reset-names = "i2c"; }; diff --git a/configs/socfpga_agilex5_defconfig b/configs/socfpga_agilex5_defconfig index 64f2f1bf115..799ea910f03 100644 --- a/configs/socfpga_agilex5_defconfig +++ b/configs/socfpga_agilex5_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_SPL_SYS_DCACHE_OFF=y CONFIG_ARCH_SOCFPGA=y CONFIG_TEXT_BASE=0x80200000 -CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=3 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80300000 @@ -79,8 +78,6 @@ CONFIG_ENV_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_ALTERA_SDRAM=y -CONFIG_GPIO_HOG=y -CONFIG_SPL_GPIO_HOG=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_DW=y |