diff options
| author | Andre Przywara <[email protected]> | 2026-04-08 00:34:47 +0200 |
|---|---|---|
| committer | Andre Przywara <[email protected]> | 2026-04-30 23:31:03 +0200 |
| commit | 06b3ae910f10c8d13ea733c05ee75cf0a4fec6fd (patch) | |
| tree | 08c137df0e34643f3a2216e5d9cec9407deaf1de | |
| parent | c3297cb93efb134cabf2138f867a811aaefb4e8a (diff) | |
sunxi: configs: enable power LEDs on 64-bit boards
We recently gained a simple way to enable a power LED very early in the
SPL boot, through simple Kconfig variables.
Add those symbols to those boards' defconfigs where the DT indicates a
default-on power LED. The number used is <port bank> * 32 + <pin no>,
an active low setup means CONFIG_SPL_SUNXI_LED_STATUS_ACTIVE_HIGH must be
undefined.
This will light up the power LED very early in the (SPL) boot phase on
those 64-bit boards.
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Paul Kocialkowski <[email protected]>
| -rw-r--r-- | configs/anbernic_rg35xx_h700_defconfig | 2 | ||||
| -rw-r--r-- | configs/bananapi_m64_defconfig | 2 | ||||
| -rw-r--r-- | configs/beelink_gs1_defconfig | 2 | ||||
| -rw-r--r-- | configs/liontron-h-a133l_defconfig | 3 | ||||
| -rw-r--r-- | configs/nanopi_neo2_defconfig | 2 | ||||
| -rw-r--r-- | configs/nanopi_neo_plus2_defconfig | 2 | ||||
| -rw-r--r-- | configs/orangepi_3_defconfig | 2 | ||||
| -rw-r--r-- | configs/orangepi_lite2_defconfig | 2 | ||||
| -rw-r--r-- | configs/orangepi_pc2_defconfig | 2 | ||||
| -rw-r--r-- | configs/orangepi_prime_defconfig | 2 | ||||
| -rw-r--r-- | configs/orangepi_zero2_defconfig | 2 | ||||
| -rw-r--r-- | configs/orangepi_zero_plus2_defconfig | 2 | ||||
| -rw-r--r-- | configs/orangepi_zero_plus_defconfig | 2 | ||||
| -rw-r--r-- | configs/radxa-cubie-a5e_defconfig | 3 | ||||
| -rw-r--r-- | configs/tanix_tx1_defconfig | 2 |
15 files changed, 32 insertions, 0 deletions
diff --git a/configs/anbernic_rg35xx_h700_defconfig b/configs/anbernic_rg35xx_h700_defconfig index 2fa57cbecce..2abea94e979 100644 --- a/configs/anbernic_rg35xx_h700_defconfig +++ b/configs/anbernic_rg35xx_h700_defconfig @@ -16,6 +16,8 @@ CONFIG_DRAM_SUNXI_PHY_ADDR_MAP_1=y CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_LPDDR4=y CONFIG_R_I2C_ENABLE=y +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=268 CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig index d957071cb13..3d1f5d27e5d 100644 --- a/configs/bananapi_m64_defconfig +++ b/configs/bananapi_m64_defconfig @@ -4,6 +4,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" CONFIG_SPL=y CONFIG_MACH_SUN50I=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=120 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SUN8I_EMAC=y diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig index de46d205453..ebac032915f 100644 --- a/configs/beelink_gs1_defconfig +++ b/configs/beelink_gs1_defconfig @@ -5,6 +5,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=356 # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_LED=y diff --git a/configs/liontron-h-a133l_defconfig b/configs/liontron-h-a133l_defconfig index 831d5b56e3a..836e8d12ff0 100644 --- a/configs/liontron-h-a133l_defconfig +++ b/configs/liontron-h-a133l_defconfig @@ -23,6 +23,9 @@ CONFIG_MACH_SUN50I_A133=y CONFIG_SUNXI_DRAM_A133_LPDDR4=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_R_I2C_ENABLE=y +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=240 +# CONFIG_SPL_SUNXI_LED_STATUS_ACTIVE_HIGH is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y diff --git a/configs/nanopi_neo2_defconfig b/configs/nanopi_neo2_defconfig index 6704a24a880..63fa6bac9ba 100644 --- a/configs/nanopi_neo2_defconfig +++ b/configs/nanopi_neo2_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=362 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig index e80e32a63d4..9d1b783476d 100644 --- a/configs/nanopi_neo_plus2_defconfig +++ b/configs/nanopi_neo_plus2_defconfig @@ -7,6 +7,8 @@ CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=362 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig index 125137bc321..409fa705a06 100644 --- a/configs/orangepi_3_defconfig +++ b/configs/orangepi_3_defconfig @@ -6,6 +6,8 @@ CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5" +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=356 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_PHY_SUN50I_USB3=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig index 577f7436c15..5d72d34eb9d 100644 --- a/configs/orangepi_lite2_defconfig +++ b/configs/orangepi_lite2_defconfig @@ -4,6 +4,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=356 # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig index d856a25814b..464b34f4ec0 100644 --- a/configs/orangepi_pc2_defconfig +++ b/configs/orangepi_pc2_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_ZQ=3881977 CONFIG_SPL_SPI_SUNXI=y +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=362 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig index e93154cc0e9..e5e9009378c 100644 --- a/configs/orangepi_prime_defconfig +++ b/configs/orangepi_prime_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=362 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index 831bfe66e25..b387b4795ad 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -10,6 +10,8 @@ CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_DDR3_1333=y CONFIG_R_I2C_ENABLE=y CONFIG_SPL_SPI_SUNXI=y +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=76 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index c4d9800975c..9758ffd385e 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -7,6 +7,8 @@ CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=362 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_zero_plus_defconfig b/configs/orangepi_zero_plus_defconfig index 4b6491dc846..bb159428a14 100644 --- a/configs/orangepi_zero_plus_defconfig +++ b/configs/orangepi_zero_plus_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=362 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/radxa-cubie-a5e_defconfig b/configs/radxa-cubie-a5e_defconfig index 9d204ef5548..84bc4e3d4a9 100644 --- a/configs/radxa-cubie-a5e_defconfig +++ b/configs/radxa-cubie-a5e_defconfig @@ -15,6 +15,9 @@ CONFIG_DRAM_SUNXI_TPR12=0x3533302f CONFIG_MACH_SUN55I_A523=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_R_I2C_ENABLE=y +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=356 +# CONFIG_SPL_SUNXI_LED_STATUS_ACTIVE_HIGH is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig index 1bd167ce0f6..03b18701859 100644 --- a/configs/tanix_tx1_defconfig +++ b/configs/tanix_tx1_defconfig @@ -14,6 +14,8 @@ CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_LPDDR3=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_R_I2C_ENABLE=y +CONFIG_SPL_SUNXI_LED_STATUS=y +CONFIG_SPL_SUNXI_LED_STATUS_GPIO=231 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y |
