diff options
| author | Andrejs Cainikovs <[email protected]> | 2023-07-11 11:09:18 +0200 |
|---|---|---|
| committer | Stefano Babic <[email protected]> | 2023-07-13 11:29:41 +0200 |
| commit | 214a986f132d749532fa15835498e1a6b723e191 (patch) | |
| tree | 7e3c04d10eb2811a87c0795b7abd7dffe5384123 | |
| parent | ce2cf345f78048a3c8cb9d7e98343a1c189a7c19 (diff) | |
arm64: dts: verdin-imx8mp: add ctrl_sleep_moci# hog
Drive CTRL_SLEEP_MOCI# high at boot (SPL) using a GPIO hog, this signal
may be used to control some power-rails on the carrier board, therefore
it should be set to high when the module is booting.
To do this as early as possible is generally a good idea and the issue
was noticed on the Yavia carrier board where it is needed to power the
I2C EEPROM on the carrier board.
Signed-off-by: Andrejs Cainikovs <[email protected]>
Signed-off-by: Marcel Ziswiler <[email protected]>
| -rw-r--r-- | arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi b/arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi index 9c6c417f7ee..0162f9b2da3 100644 --- a/arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi @@ -62,6 +62,10 @@ &gpio4 { bootph-pre-ram; + + ctrl-sleep-moci-hog { + bootph-pre-ram; + }; }; &gpio5 { @@ -106,6 +110,10 @@ bootph-pre-ram; }; +&pinctrl_ctrl_sleep_moci { + bootph-pre-ram; +}; + &pinctrl_i2c1 { bootph-pre-ram; }; |