diff options
| author | Michael Walle <[email protected]> | 2021-04-13 17:54:17 +0200 |
|---|---|---|
| committer | Priyanka Jain <[email protected]> | 2021-06-16 18:14:08 +0530 |
| commit | 2bf4658b8c5e5f4f43dc1888fe39ea61e6eeba64 (patch) | |
| tree | 5d7a650fc02ce859b34339005cbd3b3c9ecb78b0 | |
| parent | fb4e64ef9daefba6c98e6a9620e28ffee741c075 (diff) | |
board: sl28: fix RGMII clock and voltage
It was noticed that the clock isn't continuously enabled when there is
no link. This is because the 125MHz clock is derived from the internal
PLL which seems to go into some kind of power-down mode every once in a
while. The LS1028A expects a contiuous clock. Thus enable the PLL all
the time.
Also, the RGMII pad voltage is wrong, it was configured to 2.5V (that is
the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO
regulator.
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
| -rw-r--r-- | arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts | 3 | ||||
| -rw-r--r-- | arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 3 |
2 files changed, 4 insertions, 2 deletions
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts index fe708bdbfa0..33d85ed83a6 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts @@ -41,8 +41,9 @@ qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + qca,keep-pll-enabled; - vddio-supply = <&vddh>; + vddio-supply = <&vddio>; vddio: vddio-regulator { regulator-name = "VDDIO"; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts index 33b16303adb..b95e082b70b 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts @@ -32,8 +32,9 @@ qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + qca,keep-pll-enabled; - vddio-supply = <&vddh>; + vddio-supply = <&vddio>; vddio: vddio-regulator { regulator-name = "VDDIO"; |