diff options
| author | Jonas Karlman <[email protected]> | 2025-11-01 20:34:26 +0000 |
|---|---|---|
| committer | Tom Rini <[email protected]> | 2025-11-06 08:20:53 -0600 |
| commit | 32ead3c1bada6501a3d34ac7c0a7088cd6bcfbd2 (patch) | |
| tree | 5759036a7055a295a8705d9281b7f9c7914995a6 | |
| parent | 854901ccd43a2f547d2bf090456214c6033144c5 (diff) | |
Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"
Rockchip boards may depend on a working MMC regulator in SPL to
successfully load FIT payload from MMC. Typically, these boards only
include the vmmc-supply regulator and not its vin-supply in SPL control
FDT.
The commit f98d812e5353 ("power: regulator: Add vin-supply for GPIO and
Fixed regulators") breaks loading FIT from MMC in SPL on some of these
boards due to now requiring the vin-supply to be included in the SPL
control FDT.
The commit also strangely enables any found vin-supply in
regulator_common_of_to_plat() and not when a regulator is enabled or as
part of regulator_autoset().
Revert the commit to fix FIT loading in SPL on broken boards.
If a board needs to have its vin-supply enabled, two options come to
mind:
- Add regulator-always-on prop to the regulator in the -u-boot.dtsi for
any board.
- Implement full support for reference counting of regulators and then
update the regulator-uclass to enable any found vin-supply when a
regulator is enabled.
This reverts commit f98d812e5353408ef77a46bad1f1cdc793ff8a03.
Reported-by: Dang Huynh <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Dragan Simic <[email protected]>
| -rw-r--r-- | drivers/power/regulator/regulator_common.c | 10 | ||||
| -rw-r--r-- | drivers/power/regulator/regulator_common.h | 1 |
2 files changed, 0 insertions, 11 deletions
diff --git a/drivers/power/regulator/regulator_common.c b/drivers/power/regulator/regulator_common.c index 3ed713ce501..685d8735fa5 100644 --- a/drivers/power/regulator/regulator_common.c +++ b/drivers/power/regulator/regulator_common.c @@ -44,16 +44,6 @@ int regulator_common_of_to_plat(struct udevice *dev, dev_read_u32_default(dev, "u-boot,off-on-delay-us", 0); } - ret = device_get_supply_regulator(dev, "vin-supply", &plat->vin_supply); - if (ret) { - debug("Regulator vin regulator not defined: %d\n", ret); - if (ret != -ENOENT) - return ret; - } - - if (plat->vin_supply) - regulator_set_enable_if_allowed(plat->vin_supply, true); - return 0; } diff --git a/drivers/power/regulator/regulator_common.h b/drivers/power/regulator/regulator_common.h index 799c968d0b6..d4962899d83 100644 --- a/drivers/power/regulator/regulator_common.h +++ b/drivers/power/regulator/regulator_common.h @@ -14,7 +14,6 @@ struct regulator_common_plat { unsigned int startup_delay_us; unsigned int off_on_delay_us; unsigned int enable_count; - struct udevice *vin_supply; }; int regulator_common_of_to_plat(struct udevice *dev, |
