ARM: dts: stm32: Add custom PHY reset bindings on AV96

The ethernet PHY must be reset on AV96, however DWMAC currently does
not support the MDIO-bus PHY GPIO reset bindings and the ethernet MAC
PHY reset property is going away on next DT sync. Add PHY specific
reset bindings to trigger the PHY reset and fix sporadic ethernet
malfunctions, until the next DT sync.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>

1 files changed, 11 insertions, 0 deletions

diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
index 8b275e4950e..4b1dbf08387 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
@@ -19,6 +19,17 @@
 	};
 };
 
+
+&ethernet0 {
+	mdio0 {
+		ethernet-phy@7 {
+			reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
 &sdmmc1 {
 	u-boot,dm-spl;
 };