diff options
| author | Primoz Fiser <[email protected]> | 2025-08-19 07:39:41 +0200 |
|---|---|---|
| committer | Fabio Estevam <[email protected]> | 2025-08-23 08:21:25 -0300 |
| commit | a7528da151489d87582d70f2628256f4d59e2740 (patch) | |
| tree | 859e08a35f9f296f52cc6ae4af1fc4961530544b | |
| parent | a20dbbb0711ef144703848105dd0500b16ba7eae (diff) | |
board: phytec: phycore-imx93: Fix EEPROM bus mismatch in SPL
Fix PHYTEC EEPROM bus mismatch between SPL and U-Boot proper by enabling
CONFIG_SPL_DM_SEQ_ALIAS=y on phyCORE-i.MX93 boards. This way, both the
SPL and U-Boot proper will respect the device-tree aliases for I2C devs
and use the same I2C bus number for phytec_eeprom_data_setup() function
calls. This makes code less confusing and more robust.
Fixes an issue apparent since commit 79f3e77133bd ("Subtree merge tag
'v6.16-dts' of dts repo [1] into dts/upstream") where SPL would spew the
following error:
phytec_eeprom_read: i2c EEPROM not found: -110.
phytec_eeprom_data_setup: EEPROM data init failed
While later in U-Boot proper, EEPROM would be successfully read out.
This happens because Linux device-tree for phyBOARD-Segin-i.MX93 since
aforementioned commit enables I2C bus 2 (lpi2c2 is used for audio codec
and RTC) which breaks SPL I2C bus number ordering and I2C EEPROM bus is
shifted by +1. Now, lets prevent this from happening again by utilizing
device-tree aliases also in the SPL.
Signed-off-by: Primoz Fiser <[email protected]>
| -rw-r--r-- | board/phytec/phycore_imx93/spl.c | 3 | ||||
| -rw-r--r-- | configs/imx93-phycore_defconfig | 1 |
2 files changed, 2 insertions, 2 deletions
diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c index 7b5d38d438f..beaa536c600 100644 --- a/board/phytec/phycore_imx93/spl.c +++ b/board/phytec/phycore_imx93/spl.c @@ -52,8 +52,7 @@ void spl_dram_init(void) int ret; enum phytec_imx93_ddr_eeprom_code ddr_opt = PHYTEC_IMX93_DDR_INVALID; - /* NOTE: In SPL lpi2c3 is mapped to bus 0 */ - ret = phytec_eeprom_data_setup(NULL, 0, EEPROM_ADDR); + ret = phytec_eeprom_data_setup(NULL, 2, EEPROM_ADDR); if (ret && !IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_FIX)) goto out; diff --git a/configs/imx93-phycore_defconfig b/configs/imx93-phycore_defconfig index 6210be64672..af149128ed4 100644 --- a/configs/imx93-phycore_defconfig +++ b/configs/imx93-phycore_defconfig @@ -92,6 +92,7 @@ CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eth1" CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_CLK_IMX93=y CONFIG_CLK_IMX93=y CONFIG_DFU_MMC=y |