arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes

Kernel dts import now provides bootph-all and bootph-pre-ram properties
for the properties we have been overriding so far. Drop the same.

While at this enable the DM and TIFS UARTs for programming pinmux
since they are marked reserved by board.dts

Reviewed-by: Dhruva Gole <[email protected]>
Tested-by: Dhruva Gole <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>

2 files changed, 2 insertions, 102 deletions

diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts
index 55420b2f2c1..6b9f40e5558 100644
--- a/arch/arm/dts/k3-am625-r5-sk.dts
+++ b/arch/arm/dts/k3-am625-r5-sk.dts
@@ -69,22 +69,14 @@
 	};
 };
 
-&wkup_uart0_pins_default {
-	bootph-pre-ram;
-};
-
-&main_uart1_pins_default {
-	bootph-pre-ram;
-};
-
 /* WKUP UART0 is used for DM firmware logs */
 &wkup_uart0 {
-	bootph-pre-ram;
+	status = "okay";
 };
 
 /* Main UART1 is used for TIFS firmware logs */
 &main_uart1 {
-	bootph-pre-ram;
+	status = "okay";
 };
 
 &ospi0 {
diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index dcf7c7652d3..fa778b0ff4c 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -8,71 +8,14 @@
 
 / {
 	chosen {
-		stdout-path = "serial2:115200n8";
 		tick-timer = &main_timer0;
 	};
-
-	aliases {
-		mmc1 = &sdhci1;
-	};
-
-	memory@80000000 {
-		bootph-all;
-	};
-};
-
-&main_conf {
-	bootph-all;
 };
 
 &main_timer0 {
 	clock-frequency = <25000000>;
 };
 
-&main_uart0 {
-	bootph-all;
-};
-
-&main_uart0_pins_default {
-	bootph-all;
-};
-
-&sdhci1 {
-	bootph-all;
-};
-
-&main_mmc1_pins_default {
-	bootph-all;
-};
-
-&fss {
-	bootph-all;
-};
-
-&ospi0_pins_default {
-	bootph-all;
-};
-
-&ospi0 {
-	bootph-all;
-
-	flash@0 {
-		bootph-all;
-
-		partitions {
-			bootph-all;
-
-			partition@3fc0000 {
-				bootph-all;
-			};
-		};
-	};
-};
-
-&inta_main_dmss {
-	bootph-all;
-};
-
 &main_bcdma {
 	reg = <0x00 0x485c0100 0x00 0x100>,
 	      <0x00 0x4c000000 0x00 0x20000>,
@@ -100,41 +43,6 @@
 	bootph-all;
 };
 
-&cpsw3g_mdio {
-	bootph-all;
-};
-
-&cpsw3g_phy0 {
-	bootph-all;
-};
-
-&cpsw3g_phy1 {
-	bootph-all;
-};
-
-&main_rgmii1_pins_default {
-	bootph-all;
-};
-
-&main_rgmii2_pins_default {
-	bootph-all;
-};
-
-&phy_gmii_sel {
-	bootph-all;
-};
-
-&cpsw3g {
-	bootph-all;
-	ethernet-ports {
-		bootph-all;
-	};
-};
-
-&cpsw_port1 {
-	bootph-all;
-};
-
 &cpsw_port2 {
 	status = "disabled";
 };