rtc: ds1307: Remove legacy non-DM code

The DS1307 driver depends on DM_RTC since commit d425d6056e01 ("rtc: Add
DM support to ds1307"), remove the related obsolete code.

Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

1 files changed, 0 insertions, 152 deletions

diff --git a/drivers/rtc/ds1307.c b/drivers/rtc/ds1307.c
index 04921099101..34d8f8c5276 100644
--- a/drivers/rtc/ds1307.c
+++ b/drivers/rtc/ds1307.c
@@ -68,157 +68,6 @@ enum ds_type {
 #define MCP7941X_BIT_ST		0x80
 #define MCP7941X_BIT_VBATEN	0x08
 
-#ifndef CONFIG_DM_RTC
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_RTC
-
-#ifdef DEBUG_RTC
-#define DEBUGR(fmt, args...) printf(fmt, ##args)
-#else
-#define DEBUGR(fmt, args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-#ifndef CFG_SYS_I2C_RTC_ADDR
-# define CFG_SYS_I2C_RTC_ADDR	0x68
-#endif
-
-#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
-# error The DS1307 is specified only up to 100kHz!
-#endif
-
-static uchar rtc_read (uchar reg);
-static void rtc_write (uchar reg, uchar val);
-
-/*
- * Get the current time from the RTC
- */
-int rtc_get (struct rtc_time *tmp)
-{
-	int rel = 0;
-	uchar sec, min, hour, mday, wday, mon, year;
-
-#ifdef CONFIG_RTC_MCP79411
-read_rtc:
-#endif
-	sec = rtc_read (RTC_SEC_REG_ADDR);
-	min = rtc_read (RTC_MIN_REG_ADDR);
-	hour = rtc_read (RTC_HR_REG_ADDR);
-	wday = rtc_read (RTC_DAY_REG_ADDR);
-	mday = rtc_read (RTC_DATE_REG_ADDR);
-	mon = rtc_read (RTC_MON_REG_ADDR);
-	year = rtc_read (RTC_YR_REG_ADDR);
-
-	DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
-		"hr: %02x min: %02x sec: %02x\n",
-		year, mon, mday, wday, hour, min, sec);
-
-#ifdef CONFIG_RTC_DS1307
-	if (sec & RTC_SEC_BIT_CH) {
-		printf ("### Warning: RTC oscillator has stopped\n");
-		/* clear the CH flag */
-		rtc_write (RTC_SEC_REG_ADDR,
-			   rtc_read (RTC_SEC_REG_ADDR) & ~RTC_SEC_BIT_CH);
-		rel = -1;
-	}
-#endif
-
-#ifdef CONFIG_RTC_MCP79411
-	/* make sure that the backup battery is enabled */
-	if (!(wday & MCP7941X_BIT_VBATEN)) {
-		rtc_write(RTC_DAY_REG_ADDR,
-			  wday | MCP7941X_BIT_VBATEN);
-	}
-
-	/* clock halted?  turn it on, so clock can tick. */
-	if (!(sec & MCP7941X_BIT_ST)) {
-		rtc_write(RTC_SEC_REG_ADDR, MCP7941X_BIT_ST);
-		printf("Started RTC\n");
-		goto read_rtc;
-	}
-#endif
-
-	tmp->tm_sec  = bcd2bin (sec & 0x7F);
-	tmp->tm_min  = bcd2bin (min & 0x7F);
-	tmp->tm_hour = bcd2bin (hour & 0x3F);
-	tmp->tm_mday = bcd2bin (mday & 0x3F);
-	tmp->tm_mon  = bcd2bin (mon & 0x1F);
-	tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
-	tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
-	tmp->tm_yday = 0;
-	tmp->tm_isdst= 0;
-
-	DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	return rel;
-}
-
-/*
- * Set the RTC
- */
-int rtc_set (struct rtc_time *tmp)
-{
-	DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
-		printf("WARNING: year should be between 1970 and 2069!\n");
-
-	rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
-	rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
-#ifdef CONFIG_RTC_MCP79411
-	rtc_write (RTC_DAY_REG_ADDR,
-		   bin2bcd (tmp->tm_wday + 1) | MCP7941X_BIT_VBATEN);
-#else
-	rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
-#endif
-	rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
-	rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
-	rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
-#ifdef CONFIG_RTC_MCP79411
-	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec) | MCP7941X_BIT_ST);
-#else
-	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
-#endif
-
-	return 0;
-}
-
-/*
- * Reset the RTC. We setting the date back to 1970-01-01.
- * We also enable the oscillator output on the SQW/OUT pin and program
- * it for 32,768 Hz output. Note that according to the datasheet, turning
- * on the square wave output increases the current drain on the backup
- * battery to something between 480nA and 800nA.
- */
-void rtc_reset (void)
-{
-	rtc_write (RTC_SEC_REG_ADDR, 0x00);	/* clearing Clock Halt	*/
-	rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS0);
-}
-
-/*
- * Helper functions
- */
-
-static
-uchar rtc_read (uchar reg)
-{
-	return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg));
-}
-
-static void rtc_write (uchar reg, uchar val)
-{
-	i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val);
-}
-
-#endif /* !CONFIG_DM_RTC */
-
-#ifdef CONFIG_DM_RTC
 static int ds1307_rtc_set(struct udevice *dev, const struct rtc_time *tm)
 {
 	int ret;
@@ -366,4 +215,3 @@ U_BOOT_DRIVER(rtc_ds1307) = {
 	.of_match = ds1307_rtc_ids,
 	.ops	= &ds1307_rtc_ops,
 };
-#endif /* CONFIG_DM_RTC */