p2041rdb: remove NAND defconfig

The RDB doesn't support NAND boot at all, remove the config for it.
Apparently, it was introduced by commit dd84058d24ff ("kconfig: add
board Kconfig and defconfig files") which ran some scripts. Maybe that
script was wrong or the source boards.cfg was wrong. In any case, there
is no NAND flash on the RDB.

Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Peng Fan <[email protected]>

1 files changed, 0 insertions, 117 deletions

diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig
deleted file mode 100644
index 65c5840a13c..00000000000
--- a/configs/P2041RDB_NAND_defconfig
+++ /dev/null
@@ -1,117 +0,0 @@
-CONFIG_PPC=y
-CONFIG_TEXT_BASE=0xFFF40000
-CONFIG_SYS_MALLOC_LEN=0x100000
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0xE0000
-CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
-CONFIG_SYS_MONITOR_LEN=786432
-CONFIG_MPC85xx=y
-CONFIG_SYS_INIT_RAM_LOCK=y
-CONFIG_SYS_SRIO=y
-CONFIG_SRIO1=y
-CONFIG_SRIO2=y
-CONFIG_SRIO_PCIE_BOOT_MASTER=y
-CONFIG_TARGET_P2041RDB=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_ENABLE_36BIT_PHYS=y
-CONFIG_SYS_BOOK3E_HV=y
-CONFIG_SYS_CACHE_STASHING=y
-CONFIG_USE_UBOOTPATH=y
-CONFIG_PCIE1=y
-CONFIG_PCIE2=y
-CONFIG_PCIE3=y
-CONFIG_SYS_FSL_NUM_CC_PLLS=2
-CONFIG_MP=y
-CONFIG_DYNAMIC_SYS_CLK_FREQ=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_RAMBOOT_PBL=y
-CONFIG_SYS_FSL_PBL_PBI="board/nxp/p2041rdb/pbi.cfg"
-CONFIG_SYS_FSL_PBL_RCW="board/nxp/p2041rdb/rcw_p2041rdb.cfg"
-CONFIG_BOOTDELAY=10
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
-CONFIG_SYS_PBSIZE=276
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_ID_EEPROM=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_CMD_DM=y
-CONFIG_CMD_I2C=y
-CONFIG_LOADS_ECHO=y
-CONFIG_SYS_LOADS_BAUD_CHANGE=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="uImage"
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="FM1@DTSEC1"
-CONFIG_USE_ROOTPATH=y
-CONFIG_FSL_SATA_V2=y
-CONFIG_SYS_SATA_MAX_DEVICE=2
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_BR0_PRELIM_BOOL=y
-CONFIG_SYS_BR0_PRELIM=0xFFA00C21
-CONFIG_SYS_OR0_PRELIM=0xFFFC0796
-CONFIG_SYS_BR1_PRELIM_BOOL=y
-CONFIG_SYS_BR1_PRELIM=0xE8001001
-CONFIG_SYS_OR1_PRELIM=0xF8000F85
-CONFIG_SYS_BR3_PRELIM_BOOL=y
-CONFIG_SYS_BR3_PRELIM=0xFFDF0801
-CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
-CONFIG_DM_I2C=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_EMPTY_INFO=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_FLASH_QUIET_TEST=y
-CONFIG_SYS_MAX_FLASH_SECT=1024
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_FSL_ELBC=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_DM_MDIO=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_SYS_FMAN_FW_ADDR=0x100000
-CONFIG_MII=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_MAX_CONTROLLER_COUNT=2
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_POST=y