doc: board: verdin-am62p: Fix boot log output

Fix boot log output not being rendered correctly, fix
it doing the same as done in verdin-am62.rst.

Fixes: b8c43968b801 ("board: toradex: add verdin am62p support")
Signed-off-by: Francesco Dolcini <[email protected]>

1 files changed, 60 insertions, 63 deletions

diff --git a/doc/board/toradex/verdin-am62p.rst b/doc/board/toradex/verdin-am62p.rst
index 2f3262b8d1e..cc60505a40c 100644
--- a/doc/board/toradex/verdin-am62p.rst
+++ b/doc/board/toradex/verdin-am62p.rst
@@ -125,72 +125,69 @@ one may also use the update U-Boot wrappers:
 Boot
 ----
 
-Output:
+Output::
 
-.. code-block:: console
-
-U-Boot SPL 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:46:57 +0100)
-SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
-Changed A53 CPU frequency to 1250000000Hz (U grade) in DT
-SPL initial stack usage: 17080 bytes
-Trying to boot from MMC1
-Authentication passed
-Authentication passed
-Authentication passed
-Loading Environment from nowhere... OK
-init_env from device 9 not supported!
-Authentication passed
-Authentication passed
-Starting ATF on ARM64 core...
-
-NOTICE:  BL31: v2.12.0(release):v2.12.0-1106-g4301798db096
-NOTICE:  BL31: Built : 10:57:58, May  9 2025
-I/TC:
-I/TC: OP-TEE version: 4.6.0-18-g76d920d354df (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #4 Tue May  6 19:48:13 UTC 2025 aarch64
-I/TC: WARNING: This OP-TEE configuration might be insecure!
-I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
-I/TC: Primary CPU initializing
-I/TC: GIC redistributor base address not provided
-I/TC: Assuming default GIC group status and modifier
-I/TC: SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
-I/TC: Activated SA2UL device
-I/TC: Enabled firewalls for SA2UL TRNG device
-I/TC: SA2UL TRNG initialized
-I/TC: SA2UL Drivers initialized
-I/TC: HUK Initialized
-I/TC: Primary CPU switching to normal world boot
-
-U-Boot SPL 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:47:54 +0100)
-SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
-SPL initial stack usage: 1760 bytes
-HW CFG: 0x00
-Trying to boot from MMC1
-Authentication passed
-Authentication passed
+  U-Boot SPL 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:46:57 +0100)
+  SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
+  Changed A53 CPU frequency to 1250000000Hz (U grade) in DT
+  SPL initial stack usage: 17080 bytes
+  Trying to boot from MMC1
+  Authentication passed
+  Authentication passed
+  Authentication passed
+  Loading Environment from nowhere... OK
+  init_env from device 9 not supported!
+  Authentication passed
+  Authentication passed
+  Starting ATF on ARM64 core...
 
+  NOTICE:  BL31: v2.12.0(release):v2.12.0-1106-g4301798db096
+  NOTICE:  BL31: Built : 10:57:58, May  9 2025
+  I/TC:
+  I/TC: OP-TEE version: 4.6.0-18-g76d920d354df (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #4 Tue May  6 19:48:13 UTC 2025 aarch64
+  I/TC: WARNING: This OP-TEE configuration might be insecure!
+  I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
+  I/TC: Primary CPU initializing
+  I/TC: GIC redistributor base address not provided
+  I/TC: Assuming default GIC group status and modifier
+  I/TC: SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
+  I/TC: Activated SA2UL device
+  I/TC: Enabled firewalls for SA2UL TRNG device
+  I/TC: SA2UL TRNG initialized
+  I/TC: SA2UL Drivers initialized
+  I/TC: HUK Initialized
+  I/TC: Primary CPU switching to normal world boot
 
-U-Boot 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:47:54 +0100)
+  U-Boot SPL 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:47:54 +0100)
+  SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
+  SPL initial stack usage: 1760 bytes
+  HW CFG: 0x00
+  Trying to boot from MMC1
+  Authentication passed
+  Authentication passed
 
-SoC:   AM62PX SR1.0 HS-FS
-DRAM:  2 GiB
-Core:  147 devices, 31 uclasses, devicetree: separate
-MMC:   mmc@fa10000: 0, mmc@fa00000: 1
-Loading Environment from MMC... Reading from MMC(0)... OK
-In:    serial@2800000
-Out:   serial@2800000
-Err:   serial@2800000
-Model: Toradex 0099 Verdin AM62P Quad 2GB WB IT V1.0A
-Serial#: 15664919
-Carrier: Toradex Dahlia V1.1D, Serial# 11287149
-am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01903 cpsw_ver: 0x6BA81903 ale_ver: 0x00290105 Ports:2
-Setting variant to wifi
-Net:
-Warning: ethernet@8000000port@1 MAC addresses don't match:
-Address in ROM is               58:a1:5f:b8:93:f9
-Address in environment is       00:14:2d:ef:07:17
-eth0: ethernet@8000000port@1 [PRIME]Could not get PHY for mdio@f00: addr 7
-am65_cpsw_nuss_port ethernet@8000000port@2: phy_connect() failed
 
-Hit any key to stop autoboot:  0
-Verdin AM62P #
+  U-Boot 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:47:54 +0100)
+ 
+  SoC:   AM62PX SR1.0 HS-FS
+  DRAM:  2 GiB
+  Core:  147 devices, 31 uclasses, devicetree: separate
+  MMC:   mmc@fa10000: 0, mmc@fa00000: 1
+  Loading Environment from MMC... Reading from MMC(0)... OK
+  In:    serial@2800000
+  Out:   serial@2800000
+  Err:   serial@2800000
+  Model: Toradex 0099 Verdin AM62P Quad 2GB WB IT V1.0A
+  Serial#: 15664919
+  Carrier: Toradex Dahlia V1.1D, Serial# 11287149
+  am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01903 cpsw_ver: 0x6BA81903 ale_ver: 0x00290105 Ports:2
+  Setting variant to wifi
+  Net:
+  Warning: ethernet@8000000port@1 MAC addresses don't match:
+  Address in ROM is               58:a1:5f:b8:93:f9
+  Address in environment is       00:14:2d:ef:07:17
+  eth0: ethernet@8000000port@1 [PRIME]Could not get PHY for mdio@f00: addr 7
+  am65_cpsw_nuss_port ethernet@8000000port@2: phy_connect() failed
 
+  Hit any key to stop autoboot:  0
+  Verdin AM62P #