Merge branch 'next'

Signed-off-by: Tom Rini <[email protected]>

1 files changed, 86 insertions, 1 deletions

diff --git a/Kconfig b/Kconfig
index 6ba605a5641..7b360ef3d32 100644
--- a/Kconfig
+++ b/Kconfig
@@ -596,10 +596,95 @@ config MP
 	  This provides an option to bringup different processors
 	  in multiprocessor cases.
 
-endmenu		# General setup
+config HAVE_TEXT_BASE
+	bool
+	depends on !NIOS2 && !XTENSA
+	depends on !EFI_APP
+	default y
+
+config TEXT_BASE
+	depends on HAVE_TEXT_BASE
+	default 0x0 if POSITION_INDEPENDENT
+	default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
+	default 0x81700000 if MACH_SUNIV
+	default 0x2a000000 if MACH_SUN9I
+	default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
+	default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
+	hex "Text Base"
+	help
+	  The address in memory that U-Boot will be copied and executed from
+	  initially.
+
+config HAVE_SYS_UBOOT_START
+	bool "Use custom U-Boot Start"
+	depends on HAVE_TEXT_BASE
+	help
+	  By default, the address in memory that U-Boot will be copied from
+	  (TEXT_BASE) and the entry point are the same. Select this to start the
+	  execution of U-Boot from a different address.
+	  This may be required if a header or vector table needs to be copied
+	  but not executed.
+
+config SYS_UBOOT_START
+	hex
+	depends on HAVE_TEXT_BASE
+	default TEXT_BASE
+	prompt "U-Boot entry" if HAVE_SYS_UBOOT_START
+	help
+	  If TEXT_BASE differs from the start of execution, this sets the
+	  address in memory that U-Boot will start execution from initially.
+
+config HAVE_SYS_MONITOR_BASE
+	bool
+	depends on ARC || MIPS || M68K || NIOS2 || PPC || XTENSA || X86 \
+		|| ENV_IS_IN_FLASH || MTD_NOR_FLASH
+	depends on !EFI_APP
+	default y
+
+config SYS_MONITOR_BASE
+	depends on HAVE_SYS_MONITOR_BASE
+	hex "Physical start address of boot monitor code"
+	default TEXT_BASE
+	help
+	  The physical start address of boot monitor code (which is the same as
+	  CONFIG_TEXT_BASE when linking) and the same as CFG_SYS_FLASH_BASE
+	  when booting from flash.
+
+config SPL_SYS_MONITOR_BASE
+	depends on MPC85xx && SPL && HAVE_SYS_MONITOR_BASE
+	hex "Physical start address of SPL monitor code"
+	default SPL_TEXT_BASE
+
+config TPL_SYS_MONITOR_BASE
+	depends on MPC85xx && TPL && HAVE_SYS_MONITOR_BASE
+	hex "Physical start address of TPL monitor code"
+
+config DYNAMIC_SYS_CLK_FREQ
+	bool "Determine CPU clock frequency at run-time"
+	help
+	  Implement a get_board_sys_clk function that will determine the CPU
+	  clock frequency at run time, rather than define it statically.
+
+config SYS_CLK_FREQ
+	depends on !DYNAMIC_SYS_CLK_FREQ
+	int "CPU clock frequency"
+	default 125000000 if ARCH_LS1012A
+	default 100000000 if ARCH_P2020 || ARCH_T1024 || ARCH_T1042 || \
+			     ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
+	default 66666666 if ARCH_P1010 || ARCH_P1020 || ARCH_T4240
+	default 66660000 if ARCH_T2080
+	default 33333333 if RCAR_GEN3
+	default 24000000 if ARCH_EXYNOS
+	default 20000000 if RCAR_GEN2
+	default 0
+	help
+	  A static value for the CPU frequency.  Note that if not required
+	  for a given SoC, this can be left at 0.
 
 source "api/Kconfig"
 
+endmenu		# General setup
+
 source "boot/Kconfig"
 
 source "common/Kconfig"