Merge patch series "sc5xx Environment Cleanup and Fixes"

Caleb Ethridge <[email protected]> says:

This series performs a general cleanup of the default U-boot environment
for sc5xx boards, stemming from the decision to no longer store the
environment in the SPI flash. The environments for each board have been
edited to contain the minimum number of commands needed for all supported
boot modes to avoid confusion, and the default boot command synced to spi
for all boards that support it. The filesystem for the SPI flash has also
been changed from jffs2 to ubifs.

A bug with the Ethernet reset line on the sc594 has been fixed, and the
sc573 has been renamed from the EZKIT to the EZLITE to match the name of the
publically available board. EZKIT was only used internally before release.
Preliminary binman support for sc5xx boards has been removed as it was unused
and full support never added.

Link: https://lore.kernel.org/r/[email protected]

4 files changed, 4 insertions, 45 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 77c9ab9e50c..9899ab1df2b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1169,7 +1169,7 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb \
 					imx8mm-cl-iot-gate-ied-tpm0.dtbo \
 					imx8mm-cl-iot-gate-ied-tpm1.dtbo
 
-dtb-$(CONFIG_TARGET_SC573_EZKIT) += sc573-ezkit.dtb
+dtb-$(CONFIG_TARGET_SC573_EZLITE) += sc573-ezlite.dtb
 dtb-$(CONFIG_TARGET_SC584_EZKIT) += sc584-ezkit.dtb
 dtb-$(CONFIG_TARGET_SC589_MINI) += sc589-mini.dtb
 dtb-$(CONFIG_TARGET_SC589_EZKIT) += sc589-ezkit.dtb
diff --git a/arch/arm/dts/sc573-ezkit.dts b/arch/arm/dts/sc573-ezlite.dts
index 4a3d1ed5c56..57604d707f7 100644
--- a/arch/arm/dts/sc573-ezkit.dts
+++ b/arch/arm/dts/sc573-ezlite.dts
@@ -9,8 +9,8 @@
 #include "sc57x.dtsi"
 
 / {
-	model = "ADI SC573-EZKIT";
-	compatible = "adi,sc573-ezkit", "adi,sc57x";
+	model = "ADI SC573-EZLITE";
+	compatible = "adi,sc573-ezlite", "adi,sc57x";
 };
 
 &i2c0 {
diff --git a/arch/arm/dts/sc594-som-ezkit.dts b/arch/arm/dts/sc594-som-ezkit.dts
index dea9a6e27f2..396502b6745 100644
--- a/arch/arm/dts/sc594-som-ezkit.dts
+++ b/arch/arm/dts/sc594-som-ezkit.dts
@@ -130,7 +130,7 @@
 
 		gige-reset {
 			gpio-hog;
-			gpios = <15 GPIO_ACTIVE_HIGH>;
+			gpios = <15 GPIO_ACTIVE_LOW>;
 			output-high;
 			line-name = "gige-reset";
 			bootph-pre-ram;
diff --git a/arch/arm/dts/sc5xx.dtsi b/arch/arm/dts/sc5xx.dtsi
index 9d346ae62e0..072631e34f7 100644
--- a/arch/arm/dts/sc5xx.dtsi
+++ b/arch/arm/dts/sc5xx.dtsi
@@ -25,47 +25,6 @@
 		bootph-pre-ram;
 	};
 
-#ifdef CONFIG_SC5XX_USE_BINMAN
-	binman {
-		filename = CONFIG_SC5XX_BINMAN_FILENAME;
-		stage1-boot {
-			offset = <CONFIG_SC5XX_UBOOT_SPL_OFFSET>;
-			type = "blob-ext";
-			filename = "spl/u-boot-spl.ldr";
-		};
-
-		/* since falcon mode can jump from SPL to OS directly
-		 * full u-boot is optional
-		 *
-		 * @todo: review if we can say this given support has
-		 * not yet been upstreamed. Otherwise we might have to
-		 * invoke binman only for full u-boot.
-		 */
-		stage2-boot {
-			offset = <CONFIG_SC5XX_UBOOT_OFFSET>;
-			type = "blob-ext";
-			filename = "u-boot.ldr";
-			optional;
-		};
-
-#ifdef CONFIG_SC5XX_FITIMAGE_NAME
-		fitImage {
-			offset = <CONFIG_SC5XX_FITIMAGE_OFFSET>;
-			type = "blob-ext";
-			filename = CONFIG_SC5XX_FITIMAGE_NAME;
-		};
-#endif
-
-#ifdef CONFIG_SC5XX_ROOTFS_NAME
-		rfs {
-			offset = <CONFIG_SC5XX_ROOTFS_OFFSET>;
-			type = "blob-ext";
-			filename = CONFIG_SC5XX_ROOTFS_NAME;
-		};
-#endif
-	};
-#endif
-
 	clocks {
 		dummy: dummy {
 			compatible = "fixed-clock";