imx8mq: pico: Switch OF_UPSTREAM

arch/arm/dts/imx8mq-pico-pi.dts is almost same as upstream Linux dts,
so switch to OF_UPSTREAM by dropping the U-Boot copy of the dts,
enabling OF_UPSTREAM and updating CONFIG_DEFAULT_DEVICE_TREE.

Signed-off-by: Peng Fan <[email protected]>

3 files changed, 1 insertions, 419 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 51f5edcf49f..d1aa0e2a835 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -889,7 +889,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mp-dhcom-picoitx.dtb \
 	imx8mp-icore-mx8mp-edimm2.2.dtb \
 	imx8mp-msc-sm2s.dtb \
-	imx8mq-pico-pi.dtb \
 	imx8mq-kontron-pitx-imx8m.dtb \
 	imx8mq-librem5-r4.dtb
 
diff --git a/arch/arm/dts/imx8mq-pico-pi.dts b/arch/arm/dts/imx8mq-pico-pi.dts
deleted file mode 100644
index 89cbec5c41b..00000000000
--- a/arch/arm/dts/imx8mq-pico-pi.dts
+++ /dev/null
@@ -1,418 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2018 Wandboard, Org.
- * Copyright 2017 NXP
- *
- * Author: Richard Hu <[email protected]>
- */
-
-/dts-v1/;
-
-#include "imx8mq.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TechNexion PICO-PI-8M";
-	compatible = "technexion,pico-pi-imx8m", "fsl,imx8mq";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	pmic_osc: clock-pmic {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "pmic_osc";
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_otg_vbus>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 14 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1 &pinctrl_enet_3v3>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pmic@4b {
-		reg = <0x4b>;
-		compatible = "rohm,bd71837";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		clocks = <&pmic_osc>;
-		clock-names = "osc";
-		clock-output-names = "pmic_clk";
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "irq";
-
-		regulators {
-			buck1: BUCK1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <900000>;
-				rohm,dvs-idle-voltage = <850000>;
-				rohm,dvs-suspend-voltage = <800000>;
-			};
-
-			buck2: BUCK2 {
-				regulator-name = "buck2";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <1000000>;
-				rohm,dvs-idle-voltage = <900000>;
-			};
-
-			buck3: BUCK3 {
-				regulator-name = "buck3";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				rohm,dvs-run-voltage = <1000000>;
-			};
-
-			buck4: BUCK4 {
-				regulator-name = "buck4";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				rohm,dvs-run-voltage = <1000000>;
-			};
-
-			buck5: BUCK5 {
-				regulator-name = "buck5";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-			};
-
-			buck6: BUCK6 {
-				regulator-name = "buck6";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-			};
-
-			buck7: BUCK7 {
-				regulator-name = "buck7";
-				regulator-min-microvolt = <1605000>;
-				regulator-max-microvolt = <1995000>;
-				regulator-boot-on;
-			};
-
-			buck8: BUCK8 {
-				regulator-name = "buck8";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
-			};
-
-			ldo1: LDO1 {
-				regulator-name = "ldo1";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2: LDO2 {
-				regulator-name = "ldo2";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3: LDO3 {
-				regulator-name = "ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-			};
-
-			ldo4: LDO4 {
-				regulator-name = "ldo4";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			ldo5: LDO5 {
-				regulator-name = "ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-			};
-
-			ldo6: LDO6 {
-				regulator-name = "ldo6";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			ldo7: LDO7 {
-				regulator-name = "ldo7";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&uart1 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usdhc1 {
-	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
-	assigned-clock-rates = <400000000>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc2 {
-	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
-	assigned-clock-rates = <200000000>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usb3_phy0 {
-	status = "okay";
-};
-
-&usb3_phy1 {
-	status = "okay";
-};
-
-&usb_dwc3_1 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet_3v3: enet3v3grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x19
-		>;
-	};
-
-	pinctrl_fec1: fec1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3
-			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO	0x23
-			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
-			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
-			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
-			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
-			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
-			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
-			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
-			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
-			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
-			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
-			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
-			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
-			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
-		>;
-	};
-
-	pinctrl_otg_vbus: otgvbusgrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19   /* USB OTG VBUS Enable */
-		>;
-	};
-
-	pinctrl_pmic: pmicirqgrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
-			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
-			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
-			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
-			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
-			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
-			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
-			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
-			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
-			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
-			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
-			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
-			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
-			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
-			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
-			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
-			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
-			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
-			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
-			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
-			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
-			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
-			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
-			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
-			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
-			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
-			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
-			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
-			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
-			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
-			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
-			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
-			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
-			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
-			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
-		>;
-	};
-
-	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
-			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
-			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
-			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
-			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
-			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
-			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
-			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
-			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
-			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
-			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
-			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
-			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
-			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
-			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
-			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
-			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
-			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
-			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
-		>;
-	};
-};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index ef1146cd7f6..6b5903104a5 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -310,6 +310,7 @@ config TARGET_PICO_IMX8MQ
 	bool "Support Technexion Pico iMX8MQ"
 	select IMX8MQ
 	select IMX8M_LPDDR4
+	imply OF_UPSTREAM
 
 config TARGET_IMX8MN_VAR_SOM
 	bool "Variscite imx8mn_var_som"