Merge tag 'u-boot-stm32-20241112' of https://source.denx.de/u-boot/custodians/u-boot-stm

CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/23296

- Deduplicate DH STM32MP1xx DHSOM and DHCOR defconfigs
- Fixes STM32MP1xx DHSOM and DHCOR device trees
- Add support of manufacturing environment to STM32MP15xx DHSOM

4 files changed, 25 insertions, 429 deletions

diff --git a/arch/arm/dts/stm32mp13xx-dhcor-som.dtsi b/arch/arm/dts/stm32mp13xx-dhcor-som.dtsi
deleted file mode 100644
index ddad6497775..00000000000
--- a/arch/arm/dts/stm32mp13xx-dhcor-som.dtsi
+++ /dev/null
@@ -1,308 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) 2024 Marek Vasut <[email protected]>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
-#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
-#include "stm32mp13-pinctrl.dtsi"
-
-/ {
-	model = "DH electronics STM32MP13xx DHCOR SoM";
-	compatible = "dh,stm32mp131a-dhcor-som",
-		     "st,stm32mp131";
-
-	aliases {
-		mmc0 = &sdmmc2;
-		mmc1 = &sdmmc1;
-		serial0 = &uart4;
-		serial1 = &uart7;
-		rtc0 = &rv3032;
-		spi0 = &qspi;
-	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		optee@dd000000 {
-			reg = <0xdd000000 0x3000000>;
-			no-map;
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
-	};
-
-	vin: vin {
-		compatible = "regulator-fixed";
-		regulator-name = "vin";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <96>;
-	i2c-scl-falling-time-ns = <3>;
-	clock-frequency = <400000>;
-	status = "okay";
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&gpioi 3 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		status = "okay";
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-
-			ldo1-supply = <&vin>;
-			ldo2-supply = <&vin>;
-			ldo3-supply = <&vin>;
-			ldo4-supply = <&vin>;
-			ldo5-supply = <&vin>;
-			ldo6-supply = <&vin>;
-			pwr_sw1-supply = <&bst_out>;
-			pwr_sw2-supply = <&bst_out>;
-
-			vddcpu: buck1 { /* VDD_CPU_1V2 */
-				regulator-name = "vddcpu";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 { /* VDD_DDR_1V35 */
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 { /* VDD_3V3_1V8 */
-				regulator-name = "vdd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vddcore: buck4 { /* VDD_CORE_1V2 */
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_adc: ldo1 { /* VDD_ADC_1V8 */
-				regulator-name = "vdd_adc";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				interrupts = <IT_CURLIM_LDO1 0>;
-			};
-
-			vdd_ldo2: ldo2 { /* LDO2_OUT_1V8 */
-				regulator-name = "vdd_ldo2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				interrupts = <IT_CURLIM_LDO2 0>;
-			};
-
-			vdd_ldo3: ldo3 { /* LDO3_OUT */
-				regulator-name = "vdd_ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				interrupts = <IT_CURLIM_LDO3 0>;
-			};
-
-			vdd_usb: ldo4 { /* VDD_USB_3V3 */
-				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				interrupts = <IT_CURLIM_LDO4 0>;
-			};
-
-			vdd_sd: ldo5 { /* VDD_SD_3V3_1V8 */
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				interrupts = <IT_CURLIM_LDO5 0>;
-			};
-
-			vdd_sd2: ldo6 { /* VDD_SD2_3V3_1V8 */
-				regulator-name = "vdd_sd2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				interrupts = <IT_CURLIM_LDO6 0>;
-			};
-
-			vref_ddr: vref_ddr { /* VREF_DDR_0V675 */
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-			};
-
-			bst_out: boost { /* BST_OUT_5V2 */
-				regulator-name = "bst_out";
-			};
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-				interrupts = <IT_OCP_OTG 0>;
-			};
-
-			vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge = <1>;
-			};
-		};
-
-		onkey {
-			compatible = "st,stpmic1-onkey";
-			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
-			interrupt-names = "onkey-falling", "onkey-rising";
-			status = "okay";
-		};
-
-		watchdog {
-			compatible = "st,stpmic1-wdt";
-			status = "disabled";
-		};
-	};
-
-	eeprom0: eeprom@50 {
-		compatible = "atmel,24c256";	/* ST M24256 */
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-
-	rv3032: rtc@51 {
-		compatible = "microcrystal,rv3032";
-		reg = <0x51>;
-		interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a
-		     &qspi_bk1_pins_a
-		     &qspi_cs1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a
-		     &qspi_bk1_sleep_pins_a
-		     &qspi_cs1_sleep_pins_a>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	flash0: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-/* Console UART */
-&uart4 {
-	pinctrl-names = "default", "sleep", "idle";
-	pinctrl-0 = <&uart4_pins_b>;
-	pinctrl-1 = <&uart4_sleep_pins_b>;
-	pinctrl-2 = <&uart4_idle_pins_b>;
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "okay";
-};
-
-/* Bluetooth */
-&uart7 {
-	pinctrl-names = "default", "sleep", "idle";
-	pinctrl-0 = <&uart7_pins_a>;
-	pinctrl-1 = <&uart7_sleep_pins_a>;
-	pinctrl-2 = <&uart7_idle_pins_a>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
-		max-speed = <3000000>;
-		device-wakeup-gpios = <&gpiog 9 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-/* SDIO WiFi */
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	non-removable;
-	st,neg-edge;
-	vmmc-supply = <&vdd>;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	brcmf: bcrmf@1 {	/* muRata 1YN */
-		reg = <1>;
-		compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
-		interrupt-parent = <&gpioe>;
-		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "host-wake";
-	};
-};
-
-/* eMMC */
-&sdmmc2 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
-	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
-	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
-	bus-width = <8>;
-	mmc-ddr-3_3v;
-	no-sd;
-	no-sdio;
-	non-removable;
-	st,neg-edge;
-	vmmc-supply = <&vdd>;
-	vqmmc-supply = <&vdd>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/stm32mp153c-dhcor-drc-compact.dts b/arch/arm/dts/stm32mp153c-dhcor-drc-compact.dts
deleted file mode 100644
index c8b9818499e..00000000000
--- a/arch/arm/dts/stm32mp153c-dhcor-drc-compact.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-/*
- * Copyright (C) 2022 Marek Vasut <[email protected]>
- *
- * DHCOR STM32MP1 variant:
- * DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG
- * DHCOR PCB number: 586-100 or newer
- * DRC Compact PCB number: 627-100 or newer
- */
-
-/dts-v1/;
-
-#include "stm32mp153.dtsi"
-#include "stm32mp15xc.dtsi"
-#include "stm32mp15xx-dhcor-som.dtsi"
-#include "stm32mp15xx-dhcor-drc-compact.dtsi"
-
-/ {
-	model = "DH electronics STM32MP153C DHCOR DRC Compact";
-	compatible = "dh,stm32mp153c-dhcor-drc-compact",
-		     "dh,stm32mp153c-dhcor-som",
-		     "st,stm32mp153";
-};
-
-&m_can1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&m_can1_pins_c>;
-	pinctrl-1 = <&m_can1_sleep_pins_c>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/dts/stm32mp157a-dhcor-avenger96.dts
deleted file mode 100644
index 2e3c9fbb4eb..00000000000
--- a/arch/arm/dts/stm32mp157a-dhcor-avenger96.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-/*
- * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
- * Author: Manivannan Sadhasivam <[email protected]>
- * Copyright (C) 2020 Marek Vasut <[email protected]>
- *
- * DHCOR STM32MP1 variant:
- * DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG
- * DHCOR PCB number: 586-100 or newer
- * Avenger96 PCB number: 588-200 or newer
- */
-
-/dts-v1/;
-
-#include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
-#include "stm32mp15xx-dhcor-som.dtsi"
-#include "stm32mp15xx-dhcor-avenger96.dtsi"
-
-/ {
-	model = "Arrow Electronics STM32MP157A Avenger96 board";
-	compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",
-		     "st,stm32mp157";
-};
-
-&m_can1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&m_can1_pins_b>;
-	pinctrl-1 = <&m_can1_sleep_pins_b>;
-	status = "disabled";
-};
-
-&m_can2 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&m_can2_pins_a>;
-	pinctrl-1 = <&m_can2_sleep_pins_a>;
-	status = "disabled";
-};
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index dd67e960a64..4c334e4cd7a 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	aliases {
+		eeprom0 = &eeprom0;
 		i2c1 = &i2c2;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
@@ -19,15 +20,14 @@
 		mmc1 = &sdmmc2;
 		spi0 = &qspi;
 		usb0 = &usbotg_hs;
-		eeprom0 = &eeprom0;
 	};
 
 	config {
-		u-boot,boot-led = "heartbeat";
-		u-boot,error-led = "error";
-		dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
 		dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>;
 		dh,mac-coding-gpios = <&gpioc 3 0>;
+		dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
+		u-boot,boot-led = "heartbeat";
+		u-boot,error-led = "error";
 	};
 };
 
@@ -36,17 +36,6 @@
 	/delete-property/ st,eth-ref-clk-sel;
 };
 
-&ethernet0_rmii_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
-			 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
-			 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
-			 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK */
-			 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
-			 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
-	};
-};
-
 &i2c4 {
 	bootph-all;
 	bootph-pre-ram;
@@ -62,36 +51,6 @@
 	};
 };
 
-&phy0 {
-	/delete-property/ reset-gpios;
-};
-
-&pinctrl {
-	mco2_pins_a: mco2-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-	};
-
-	mco2_sleep_pins_a: mco2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
-		};
-	};
-};
-
-&pmic {
-	bootph-all;
-	bootph-pre-ram;
-
-	regulators {
-		bootph-pre-ram;
-	};
-};
-
 &flash0 {
 	bootph-pre-ram;
 
@@ -123,6 +82,19 @@
 	};
 };
 
+&phy0 {
+	/delete-property/ reset-gpios;
+};
+
+&pmic {
+	bootph-all;
+	bootph-pre-ram;
+
+	regulators {
+		bootph-pre-ram;
+	};
+};
+
 &qspi {
 	bootph-pre-ram;
 };
@@ -269,6 +241,14 @@
 	};
 };
 
+&reg11 {
+	bootph-pre-ram;
+};
+
+&reg18 {
+	bootph-pre-ram;
+};
+
 &sdmmc1 {
 	bootph-pre-ram;
 	st,use-ckin;
@@ -331,14 +311,6 @@
 	};
 };
 
-&reg11 {
-	bootph-pre-ram;
-};
-
-&reg18 {
-	bootph-pre-ram;
-};
-
 &usb33 {
 	bootph-pre-ram;
 };