ARM: MediaTek: add basic support for MT8518 boards

This adds a general board file based on MT8518 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8518 eMMC board.

Signed-off-by: mingming lee <[email protected]>
[trini: Migrate env location to defconfig, set ENV_IS_IN_MMC]
Signeed-off-by: Tom Rini <[email protected]>

3 files changed, 107 insertions, 1 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d8846df1bdd..3dc9c4d41c8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -835,7 +835,8 @@ dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt7623n-bananapi-bpi-r2.dtb \
 	mt7629-rfb.dtb \
-	mt8516-pumpkin.dtb
+	mt8516-pumpkin.dtb \
+	mt8518-ap1-emmc.dtb
 
 dtb-$(CONFIG_TARGET_GE_BX50V3) += imx6q-bx50v3.dtb
 dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
diff --git a/arch/arm/dts/mt8518-ap1-emmc.dts b/arch/arm/dts/mt8518-ap1-emmc.dts
new file mode 100644
index 00000000000..f017ee4431e
--- /dev/null
+++ b/arch/arm/dts/mt8518-ap1-emmc.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <[email protected]>
+ *
+ */
+
+/dts-v1/;
+
+#include <config.h>
+#include "mt8518.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "MT8518 AP1 EMMC";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	cap-mmc-hw-reset;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	status = "okay";
+};
+
+&pinctrl {
+	mmc0_pins_default: mmc0default {
+		mux {
+			function = "msdc";
+			groups =  "msdc0";
+		};
+
+		conf-cmd-data {
+			pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+			       "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+			       "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "MSDC0_CLK";
+			bias-pull-down;
+		};
+
+		conf-rst {
+			pins = "MSDC0_RSTB";
+			bias-pull-up;
+		};
+	};
+
+		uart0_pins: uart0 {
+			mux {
+				function = "uart";
+				groups = "uart0_0_rxd_txd";
+			};
+		};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 8e343c3182b..ad453a60c19 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -51,6 +51,7 @@ endchoice
 
 source "board/mediatek/mt7623/Kconfig"
 source "board/mediatek/mt7629/Kconfig"
+source "board/mediatek/mt8518/Kconfig"
 source "board/mediatek/pumpkin/Kconfig"
 
 endif