diff options
| author | Marek Vasut <[email protected]> | 2025-06-30 02:10:31 +0200 |
|---|---|---|
| committer | Patrice Chotard <[email protected]> | 2025-07-29 17:02:31 +0200 |
| commit | bd50cb5cdeba73b4d5019f3357edea4f29e2db2a (patch) | |
| tree | 6709b2d8369d5f77e0efabe7d59acb8691fda7e6 /board/st | |
| parent | 61d353dc9292b4e3e0456b4a145c3b7454d765ff (diff) | |
ARM: stm32: Add STM32MP13xx debug UART initialization
Add default STM32MP13xx debug UART initialization. This is similar
to STM32MP15xx debug UART initialization, except the RCC registers
are at different offsets and the UART pinmux pins are different.
Reviewed-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Diffstat (limited to 'board/st')
| -rw-r--r-- | board/st/stm32mp1/debug_uart.c | 21 |
1 files changed, 18 insertions, 3 deletions
diff --git a/board/st/stm32mp1/debug_uart.c b/board/st/stm32mp1/debug_uart.c index 24e3f9f2201..4c2149e0480 100644 --- a/board/st/stm32mp1/debug_uart.c +++ b/board/st/stm32mp1/debug_uart.c @@ -9,17 +9,32 @@ #include <asm/arch/stm32.h> #include <linux/bitops.h> +#if IS_ENABLED(CONFIG_STM32MP13X) +#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0700) +#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0768) +#elif IS_ENABLED(CONFIG_STM32MP15X) #define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00) #define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28) +#endif +#define GPIOA_BASE 0x50002000 #define GPIOG_BASE 0x50008000 void board_debug_uart_init(void) { - if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE) { - /* UART4 clock enable */ - setbits_le32(RCC_MP_APB1ENSETR, BIT(16)); + if (CONFIG_DEBUG_UART_BASE != STM32_UART4_BASE) + return; + /* UART4 clock enable */ + setbits_le32(RCC_MP_APB1ENSETR, BIT(16)); + + if (IS_ENABLED(CONFIG_STM32MP13X)) { + /* GPIOA clock enable */ + writel(BIT(0), RCC_MP_AHB4ENSETR); + /* GPIO configuration for DH boards: Uart4 TX = A9 */ + writel(0xfffbffff, GPIOA_BASE + 0x00); + writel(0x00000080, GPIOA_BASE + 0x24); + } else if (IS_ENABLED(CONFIG_STM32MP15X)) { /* GPIOG clock enable */ writel(BIT(6), RCC_MP_AHB4ENSETR); /* GPIO configuration for ST boards: Uart4 TX = G11 */ |