Convert all of CONFIG_CONS_INDEX to Kconfig

This converts the following to Kconfig:
   CONFIG_CONS_INDEX

We have existing entries for this option in a number of places, with
different guards on them.  They're also sometimes used for things not
directly inside of the serial driver.  First, introduce a new symbol to
guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
need this for the serial driver, but for some other use, we can still do
it.  Next, consolidate all of these into the single entry in
drivers/serial/Kconfig.  Finally, introduce CONS_INDEX_[023456] so that
we can imply a correct value here to make the defconfig side of this
smaller.

Signed-off-by: Adam Ford <[email protected]>
[trini: Rework a lot of the logic here, such that I took authorship from
Adam, but kept his S-o-B line]
Signed-off-by: Tom Rini <[email protected]>

8 files changed, 0 insertions, 80 deletions

diff --git a/board/birdland/bav335x/Kconfig b/board/birdland/bav335x/Kconfig
index 3380ed39b2f..40053665aab 100644
--- a/board/birdland/bav335x/Kconfig
+++ b/board/birdland/bav335x/Kconfig
@@ -12,16 +12,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "bav335x"
 
-config CONS_INDEX
-	int "UART used for console"
-	range 1 6
-	default 1
-	help
-	  The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
-	  in documentation, etc) available to it.  Depending on your specific
-	  board you may want something other than UART0 as for example the IDK
-	  uses UART3 so enter 4 here.
-
 config BAV_VERSION
 	int "BAV335x Version (1=A, 2=B)"
 	range 1 2
diff --git a/board/eets/pdu001/Kconfig b/board/eets/pdu001/Kconfig
index 6217a8f99be..f28ba6e7bff 100644
--- a/board/eets/pdu001/Kconfig
+++ b/board/eets/pdu001/Kconfig
@@ -17,22 +17,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "pdu001"
 
-config CONS_INDEX
-	int "UART used for console"
-	range 1 6
-	default 4
-	help
-	  The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
-	  in documentation, etc) available to it.  The best choice for the
-	  PDU001 is UART3 as it is wired to the header K2; enter 4 here to
-	  use UART3. UART0 is connected to the EIA-485 transceiver. If you
-	  really need to use it, you are advised to remove the transceiver U14
-	  from the board. UART1 is wired to the backplane and therefore
-	  accessible from there or by the backplane connector K1 of the PDU.
-	  Any other UART then UART3 (enter 4 here), UART1 (enter 2 here) or
-	  UART0 (enter 1 here) are not sensible since they are not wired to
-	  any connector and therefore difficult to access.
-
 choice
 	prompt "State of Run LED"
 	default PDU001_RUN_LED_RED
diff --git a/board/hisilicon/hikey/Kconfig b/board/hisilicon/hikey/Kconfig
index 9171502a198..f7f1055e179 100644
--- a/board/hisilicon/hikey/Kconfig
+++ b/board/hisilicon/hikey/Kconfig
@@ -12,11 +12,4 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "hikey"
 
-config CONS_INDEX
-	int "UART used for console"
-	range 1 4
-	default 4
-	help
-	  The hi6220 SoC has 5 UARTs. For example to use UART0 enter 1 here.
-
 endif
diff --git a/board/tcl/sl50/Kconfig b/board/tcl/sl50/Kconfig
index d0068d93249..1b3f5cfc618 100644
--- a/board/tcl/sl50/Kconfig
+++ b/board/tcl/sl50/Kconfig
@@ -12,14 +12,4 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "am335x_sl50"
 
-config CONS_INDEX
-	int "UART used for console"
-	range 1 6
-	default 1
-	help
-	  The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
-	  in documentation, etc) available to it.  Depending on your specific
-	  board you may want something other than UART0 as for example the IDK
-	  uses UART3 so enter 4 here.
-
 endif
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
index 97374bdc12a..b66ca1a5798 100644
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -12,16 +12,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "am335x_evm"
 
-config CONS_INDEX
-	int "UART used for console"
-	range 1 6
-	default 1
-	help
-	  The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
-	  in documentation, etc) available to it.  Depending on your specific
-	  board you may want something other than UART0 as for example the IDK
-	  uses UART3 so enter 4 here.
-
 config NOR
 	bool "Support for NOR flash"
 	help
diff --git a/board/ti/am57xx/Kconfig b/board/ti/am57xx/Kconfig
index cead0f4f042..0c566820158 100644
--- a/board/ti/am57xx/Kconfig
+++ b/board/ti/am57xx/Kconfig
@@ -9,15 +9,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "am57xx_evm"
 
-config CONS_INDEX
-        int "UART used for console"
-        range 1 6
-        default 3
-        help
-          The AM57x (and DRA7xx) SoC has a total of 6 UARTs available to it.
-          Depending on your specific board you may want something other than UART3
-          here.
-
 source "board/ti/common/Kconfig"
 
 endif
diff --git a/board/ti/dra7xx/Kconfig b/board/ti/dra7xx/Kconfig
index b642113b833..f6a8e07c5b2 100644
--- a/board/ti/dra7xx/Kconfig
+++ b/board/ti/dra7xx/Kconfig
@@ -9,15 +9,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "dra7xx_evm"
 
-config CONS_INDEX
-	int "UART used for console"
-	range 1 6
-	default 1
-	help
-	  The DRA7xx (and AM57x) SoC has a total of 6 UARTs available to it.
-	  Depending on your specific board you may want something other than UART1
-	  here.
-
 source "board/ti/common/Kconfig"
 
 endif
diff --git a/board/vscom/baltos/Kconfig b/board/vscom/baltos/Kconfig
index bc1edcf3a47..b721ed19d80 100644
--- a/board/vscom/baltos/Kconfig
+++ b/board/vscom/baltos/Kconfig
@@ -12,13 +12,4 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "baltos"
 
-config CONS_INDEX
-	int "UART used for console"
-	range 1 6
-	default 1
-	help
-	  The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
-	  in documentation, etc) available to it.  Depending on your specific
-	  board you may want something other than UART0.
-
 endif