diff options
| author | Dario Binacchi <[email protected]> | 2025-05-20 10:54:16 +0200 |
|---|---|---|
| committer | Fabio Estevam <[email protected]> | 2025-05-21 07:52:29 -0300 |
| commit | 8acea298bb82c38b20855cd46a46b9e418dc1fb0 (patch) | |
| tree | e5dc2477144d6cb17582685e707914856cbcb575 /common | |
| parent | b0454fc1ca207d91d425cbe5a30240b639444d3c (diff) | |
spl: Kconfig: support U-Boot load from raw NAND
Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks
the boot of the BSH SMM S2 board. As stated in the commit itself, "Some
boards use this value even though MMC is not enabled in SPL, for example
imx8mn_bsh_smm_s2".
Support load of the U-Boot image from raw NAND sector. This is equivalent
to load from MMC raw sector.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Dario Binacchi <[email protected]>
Diffstat (limited to 'common')
| -rw-r--r-- | common/spl/Kconfig | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index aa3a85eea54..77cf04d38ed 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -974,6 +974,21 @@ config SPL_NAND_SUPPORT This enables the drivers in drivers/mtd/nand/raw as part of an SPL build. +config SPL_NAND_RAW_U_BOOT_USE_SECTOR + bool "NAND raw mode: by sector" + depends on SPL_NAND_SUPPORT + select SPL_LOAD_BLOCK + help + Use sector number for specifying U-Boot location on NAND in + raw mode. + +config SPL_NAND_RAW_U_BOOT_SECTOR + hex "Address on the NAND to load U-Boot from" + depends on SPL_NAND_RAW_U_BOOT_USE_SECTOR + help + Address on the NAND to load U-Boot from, when the NAND is being used + in raw mode. Units: NAND disk sectors (1 sector = 512 bytes). + config SPL_NAND_RAW_ONLY bool "Support to boot only raw u-boot.bin images" depends on SPL_NAND_SUPPORT |