Merge patch series "configs: ti: Enable basic settings for SystemReady ACS"

Jonathan Humphreys <[email protected]> says:

Set basic settings needed for System Ready IR ACS testing, for several TI SoC
based platforms: AM64, AM62, AM62p, BeaglePlay, J7, and BeagleboneAI.

For AM64, AM62, and AM62p, also includes some config cleanup.  Should be no
functional change.

1 files changed, 11 insertions, 10 deletions

diff --git a/configs/am62px_evm_a53_defconfig b/configs/am62px_evm_a53_defconfig
index 6dbdd427ecb..638d2e90a6b 100644
--- a/configs/am62px_evm_a53_defconfig
+++ b/configs/am62px_evm_a53_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_K3=y
-CONFIG_TI_SECURE_DEVICE=y
 CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -14,7 +13,6 @@ CONFIG_SF_DEFAULT_SPEED=25000000
 CONFIG_ENV_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
-CONFIG_OF_UPSTREAM=y
 CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am62p5-sk"
 CONFIG_SPL_TEXT_BASE=0x80080000
 CONFIG_OF_LIBFDT_OVERLAY=y
@@ -22,6 +20,10 @@ CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80a00000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SPL_STACK_R=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -30,15 +32,10 @@ CONFIG_SPL_SPI=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_BOOTSTD_FULL=y
-CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb"
 CONFIG_SPL_MAX_SIZE=0x58000
 CONFIG_SPL_PAD_TO=0x0
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x80a00000
-CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_STACK_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DMA=y
@@ -46,7 +43,6 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
-CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
@@ -57,10 +53,10 @@ CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_THERMAL=y
 CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_SYS_MAXARGS=64
+CONFIG_CMD_BOOTEFI_SELFTEST=y
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
-CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -69,6 +65,7 @@ CONFIG_CMD_MTD=y
 CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
@@ -76,6 +73,7 @@ CONFIG_CMD_UBI=y
 CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_MULTI_DTB_FIT=y
 CONFIG_SPL_MULTI_DTB_FIT=y
 CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
@@ -149,6 +147,8 @@ CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_REMOTEPROC_TI_K3_DSP=y
 CONFIG_REMOTEPROC_TI_K3_R5F=y
 CONFIG_RESET_TI_SCI=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_EMULATION=y
 CONFIG_DM_SERIAL=y
 CONFIG_SOC_DEVICE=y
 CONFIG_SOC_DEVICE_TI_K3=y
@@ -176,3 +176,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0451
 CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
 CONFIG_SPL_DFU=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_EFI_SET_TIME=y