arm: Remove ethernut5 board

As per the maintainers at egnite GmbH, they are no longer interested in
supporting this board. Go and remove the platform here. Furthermore,
this is the only AT91SAM9XE platform in-tree so remove supporting code
for that as well.

Acked-by: Nicolas Ferre <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>

1 files changed, 0 insertions, 87 deletions

diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig
deleted file mode 100644
index 004f1866162..00000000000
--- a/configs/ethernut5_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_ARCH_AT91=y
-CONFIG_TEXT_BASE=0x27000000
-CONFIG_SYS_MALLOC_LEN=0x121000
-CONFIG_TARGET_ETHERNUT5=y
-CONFIG_AT91_EFLASH=y
-CONFIG_EFLASH_PROTSECTORS=1
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x21000
-CONFIG_ENV_OFFSET=0x3DE000
-CONFIG_ENV_SECT_SIZE=0x21000
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="ethernut5"
-CONFIG_SYS_LOAD_ADDR=0x020000000
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0xc6000 0x294000; bootm 0x22000000"
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=281
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="U-Boot> "
-# CONFIG_CMD_BDI is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_UNZIP=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_DHCP=y
-CONFIG_BOOTP_BOOTFILESIZE=y
-CONFIG_CMD_RARP=y
-CONFIG_SYS_DISABLE_AUTOLOAD=y
-CONFIG_CMD_MII=y
-# CONFIG_CMD_MDIO is not set
-CONFIG_CMD_PING=y
-CONFIG_CMD_CDP=y
-CONFIG_CMD_SNTP=y
-CONFIG_CMD_DNS=y
-CONFIG_CMD_BSP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:-(root)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_SPI_MAX_HZ=15000000
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RETRY_COUNT=20
-CONFIG_CLK=y
-CONFIG_CLK_AT91=y
-CONFIG_AT91_GPIO=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_SOFT=y
-CONFIG_SYS_I2C_SOFT_SLAVE=0
-CONFIG_GENERIC_ATMEL_MCI=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_SYS_MAX_FLASH_SECT=32
-CONFIG_MTD_RAW_NAND=y
-# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
-CONFIG_NAND_ATMEL=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_SPI_FLASH_DATAFLASH=y
-CONFIG_MACB=y
-CONFIG_RMII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AT91=y
-CONFIG_RTC_PCF8563=y
-CONFIG_DM_SERIAL=y
-CONFIG_ATMEL_USART=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_USB=y
-CONFIG_JFFS2_NAND=y