sbp1: Add support for IBM SBP1 board

Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC.

Signed-off-by: Patrick Rudolph <[email protected]>
Signed-off-by: Naresh Solanki <[email protected]>

1 files changed, 126 insertions, 0 deletions

diff --git a/configs/ibm-sbp1_defconfig b/configs/ibm-sbp1_defconfig
new file mode 100644
index 00000000000..cf667217ccc
--- /dev/null
+++ b/configs/ibm-sbp1_defconfig
@@ -0,0 +1,126 @@
+CONFIG_ARM=y
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_SPL_SYS_THUMB_BUILD=y
+CONFIG_ARCH_ASPEED=y
+CONFIG_TEXT_BASE=0x80000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_ASPEED_AST2600=y
+CONFIG_TARGET_EVB_AST2600=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-aspeed/ast2600/u-boot-spl.lds"
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xe0000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="ast2600-sbp1"
+CONFIG_DM_RESET=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x83000000
+CONFIG_SPL_SIZE_LIMIT=0x10000
+CONFIG_SPL=y
+# CONFIG_ARMV7_NONSEC is not set
+CONFIG_SYS_LOAD_ADDR=0x83000000
+CONFIG_SPL_PAYLOAD="u-boot.img"
+CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200n8 root=/dev/ram rw earlycon"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run bootspi"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x83000000
+CONFIG_SPL_BSS_MAX_SIZE=0x1000000
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
+CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_NCSI=y
+CONFIG_CMD_EXT4=y
+CONFIG_DOS_PARTITION=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SECT_SIZE_AUTO=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_ASPEED_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_ASPEED=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ASPEED=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_NCSI=y
+CONFIG_DM_MDIO=y
+CONFIG_FTGMAC100=y
+CONFIG_ASPEED_MDIO=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_SPI_DIRMAP=y
+CONFIG_SPI_ASPEED_SMC=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_WDT=y
+CONFIG_SHA384=y
+CONFIG_SPL_CRC32=y
+CONFIG_HEXDUMP=y
+# CONFIG_EFI_LOADER is not set
+CONFIG_PHANDLE_CHECK_SEQ=y