diff options
| author | Chris Packham <[email protected]> | 2025-12-19 11:59:36 +1300 |
|---|---|---|
| committer | Stefan Roese <[email protected]> | 2026-06-10 11:23:26 +0200 |
| commit | 59e13ed8f6d8b030c6aaf7e2af77f073fecc3b30 (patch) | |
| tree | c75189df0d741b00986b07c63e60a1c2029c4b51 /configs | |
| parent | c444ff30e18cea32746adba6766b0da4c0d585b4 (diff) | |
arm: mvebu: Add Allied Telesis x220
Add the Allied Telesis x220 board. There are a number of other variants
with the same CPU block that are sold under some different brand names
but the x220 was first.
The x220 uses the AlleyCat3 switch chip with integrated ARMv7 CPU.
Because of this it is reliant on a binary blob for the DDR training. In
upstream u-boot this is replaced by an empty file.
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/x220_defconfig | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/configs/x220_defconfig b/configs/x220_defconfig new file mode 100644 index 00000000000..4318f5e6ef1 --- /dev/null +++ b/configs/x220_defconfig @@ -0,0 +1,76 @@ +CONFIG_ARM=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_KWD_CONFIG="board/alliedtelesis/x220/kwbimage.cfg" +CONFIG_TEXT_BASE=0x00800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 +CONFIG_TARGET_X220=y +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0x100000 +CONFIG_ENV_SECT_SIZE=0x40000 +CONFIG_DEFAULT_DEVICE_TREE="armada-xp-atl-x220" +CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_PCI=y +CONFIG_SYS_MEMTEST_START=0x00800000 +CONFIG_SYS_MEMTEST_END=0x00ffffff +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_FIT_BEST_MATCH=y +CONFIG_USE_PREBOOT=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SYS_MAXARGS=96 +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nand0=nand" +CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:112M(user),8M(errlog),8M(nand-bbt)" +CONFIG_CMD_UBI=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_RELOC_GD_ENV_ADDR=y +CONFIG_ARP_TIMEOUT=200 +CONFIG_NET_RETRY_COUNT=50 +CONFIG_GPIO_HOG=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +# CONFIG_MMC is not set +CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_NAND_PXA3XX=y +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PCI_MVEBU=y +CONFIG_SYS_NS16550=y +CONFIG_KIRKWOOD_SPI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_WDT=y +CONFIG_WDT_ORION=y |