imx: Support i.MX91 11x11 FRDM board

Add i.MX91 11x11 FRDM Board support.
 - Four ddr scripts included w/o inline ecc feature. Support
   both 1gb and 2gb DDR
 - SDHC/EQOS/I2C/UART supported
 - PCA9451 supported, default nominal drive mode
 - Documentation added.

Signed-off-by: Joseph Guo <[email protected]>

2 files changed, 141 insertions, 0 deletions

diff --git a/configs/imx91_11x11_frdm_defconfig b/configs/imx91_11x11_frdm_defconfig
new file mode 100644
index 00000000000..dd181750c26
--- /dev/null
+++ b/configs/imx91_11x11_frdm_defconfig
@@ -0,0 +1,138 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX9=y
+CONFIG_TEXT_BASE=0x80200000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0x700000
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx91-11x11-frdm"
+CONFIG_TARGET_IMX91_11X11_FRDM=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x204E0000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_TEXT_BASE=0x204A0000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x20498000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x80400000
+CONFIG_SPL=y
+CONFIG_CMD_DEKBLOB=y
+CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x90000000
+CONFIG_REMAKE_ELF=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTCOMMAND="bootflow scan -lb; run bsp_bootcmd"
+CONFIG_DEFAULT_FDT_FILE="imx91-11x11-frdm.dtb"
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2074
+# CONFIG_BOARD_INIT is not set
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_CMD_CPU=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_RTC=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_MMC_DEVICE_INDEX=1
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eth1"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_ADC=y
+CONFIG_ADC_IMX93=y
+CONFIG_CLK_IMX93=y
+CONFIG_SAVED_DRAM_TIMING_BASE=0x2049C000
+CONFIG_IMX_RGPIO2P=y
+CONFIG_DM_PCA953X=y
+CONFIG_ADP5585_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_PHY_ANEG_TIMEOUT=20000
+CONFIG_PHY_MOTORCOMM=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX93=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PCA9450=y
+CONFIG_SPL_DM_PMIC_PCA9450=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PCA9450=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_EMULATION=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_CMD_POWEROFF=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_ULP_WATCHDOG=y
+CONFIG_WDT=y
+CONFIG_SHA384=y
+CONFIG_LZO=y
+CONFIG_BZIP2=y
diff --git a/configs/imx91_11x11_frdm_inline_ecc_defconfig b/configs/imx91_11x11_frdm_inline_ecc_defconfig
new file mode 100644
index 00000000000..9b13e769442
--- /dev/null
+++ b/configs/imx91_11x11_frdm_inline_ecc_defconfig
@@ -0,0 +1,3 @@
+#include <configs/imx91_11x11_frdm_defconfig>
+
+CONFIG_IMX9_DRAM_INLINE_ECC=y
\ No newline at end of file