diff options
| author | Jonas Karlman <[email protected]> | 2026-01-10 20:53:33 +0000 |
|---|---|---|
| committer | Tom Rini <[email protected]> | 2026-03-10 10:07:02 -0600 |
| commit | ebf46b588f43ffcff7b92b341a7a567a705a8c60 (patch) | |
| tree | 15b3350eb9276a3238477a303ac18e879e4aa710 /configs | |
| parent | 804d0095381ab5d4117a6da303e541fbe56479f1 (diff) | |
board: rockchip: Add FriendlyElec NanoPi Zero2
The NanoPi Zero2 is a small single board computer developed by
FriendlyElec, based on the Rockchip RK3528A SoC.
Add support for the FriendlyElec NanoPi Zero2 board.
Features tested on a FriendlyElec NanoPi Zero2 2407:
- SD-card boot
- eMMC boot
- Ethernet
- USB host
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Christopher Obbard <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/nanopi-zero2-rk3528_defconfig | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/configs/nanopi-zero2-rk3528_defconfig b/configs/nanopi-zero2-rk3528_defconfig new file mode 100644 index 00000000000..2e54c0ff20a --- /dev/null +++ b/configs/nanopi-zero2-rk3528_defconfig @@ -0,0 +1,64 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3528-nanopi-zero2" +CONFIG_ROCKCHIP_RK3528=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART_BASE=0xFF9F0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3528-nanopi-zero2.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_RNG_SEED=y +CONFIG_SPL_MAX_SIZE=0x40000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMINFO_MAP=y +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MISC=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_RNG=y +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_BUTTON=y +CONFIG_BUTTON_ADC=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_MDIO=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=y |