Merge tag 'u-boot-imx-next-20241126' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/23563

- Make Siemens i.MX8 Capricorn board to boot U-Boot mainline again.
- Add support for phycore-imx93 2GB LPDDR4X variant.
- Add phycore-imx8mm EEPROM detection initialisation.

4 files changed, 17 insertions, 140 deletions

diff --git a/configs/deneb_defconfig b/configs/capricorn_cxg3_defconfig
index 98841bb8771..276445528a9 100644
--- a/configs/deneb_defconfig
+++ b/configs/capricorn_cxg3_defconfig
@@ -10,10 +10,11 @@ CONFIG_NR_DRAM_BANKS=3
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
+CONFIG_ENV_OFFSET=0x200000
 CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8-deneb"
-CONFIG_TARGET_DENEB=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8-capricorn-cxg3"
+CONFIG_SPL_TEXT_BASE=0x100000
+CONFIG_TARGET_CAPRICORN=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
@@ -25,7 +26,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x1000
 CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x80280000
 CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x2000
+CONFIG_ENV_OFFSET_REDUND=0x202000
 CONFIG_IDENT_STRING=" ##v01.06"
 CONFIG_REMAKE_ELF=y
 # CONFIG_EFI_LOADER is not set
@@ -55,9 +56,10 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x4000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
@@ -112,10 +114,13 @@ CONFIG_PHYLIB=y
 CONFIG_MV88E61XX_SWITCH=y
 CONFIG_MV88E61XX_CPU_PORT=5
 CONFIG_MV88E61XX_PHY_PORTS=0x7
+CONFIG_DM_ETH_PHY=y
 CONFIG_FEC_MXC_SHARE_MDIO=y
 CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8=y
@@ -129,5 +134,7 @@ CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_SPL_WDT is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_WDT=y
+CONFIG_WDT_SIEMENS_PMIC=y
 CONFIG_SPL_TINY_MEMSET=y
diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig
deleted file mode 100644
index af9c7a4aed6..00000000000
--- a/configs/giedi_defconfig
+++ /dev/null
@@ -1,133 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_IMX8=y
-CONFIG_TEXT_BASE=0x80020000
-CONFIG_SYS_MALLOC_LEN=0x2800000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8-giedi"
-CONFIG_TARGET_GIEDI=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x13e000
-CONFIG_SPL_TEXT_BASE=0x100000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x128000
-CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SYS_BOOTM_LEN=0x800000
-CONFIG_SYS_LOAD_ADDR=0x80280000
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x2000
-CONFIG_IDENT_STRING=" ##v01.07"
-CONFIG_REMAKE_ELF=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_FIT=y
-CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
-CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
-CONFIG_AUTOBOOT_KEYED_CTRLC=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;"
-CONFIG_SYS_CBSIZE=2048
-CONFIG_SYS_PBSIZE=2073
-CONFIG_LOG=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_MAX_SIZE=0x1f000
-CONFIG_SPL_BOARD_INIT=y
-# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
-CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot# "
-CONFIG_CMD_CPU=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DM=y
-CONFIG_CMD_FUSE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_READ=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_MMC_ENV_PART=2
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="eth1"
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_ENV=y
-CONFIG_SPL_CLK=y
-CONFIG_CLK_IMX8=y
-CONFIG_CPU=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_USDHC=y
-CONFIG_PHYLIB=y
-CONFIG_MV88E61XX_SWITCH=y
-CONFIG_MV88E61XX_CPU_PORT=5
-CONFIG_MV88E61XX_PHY_PORTS=0x7
-CONFIG_FEC_MXC_SHARE_MDIO=y
-CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_IMX8=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8_POWER_DOMAIN=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPL_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LPUART=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_SPL_WDT is not set
-CONFIG_SPL_TINY_MEMSET=y
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-phycore_defconfig
index 309262c4303..cf9800118ac 100644
--- a/configs/imx93-phyboard-segin_defconfig
+++ b/configs/imx93-phycore_defconfig
@@ -6,6 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x20000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_PHYTEC_SOM_DETECTION=y
 CONFIG_ENV_SOURCE_FILE="phycore_imx93"
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x700000
@@ -31,6 +32,7 @@ CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_REMAKE_ELF=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 5e59efe5649..c24580430f2 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -11,6 +11,7 @@ CONFIG_ENV_OFFSET=0x3C0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-phyboard-polis-rdk"
 CONFIG_TARGET_PHYCORE_IMX8MM=y
+CONFIG_PHYTEC_SOM_DETECTION=y
 CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y