diff options
| author | Mike Frysinger <[email protected]> | 2009-04-24 23:39:41 -0400 |
|---|---|---|
| committer | Mike Frysinger <[email protected]> | 2009-05-06 08:47:21 -0400 |
| commit | 02778f2f1b4b1a28b492367477db27c58d45ae35 (patch) | |
| tree | f7f5b18e011460da48e86b93d808052e945c7433 /cpu/blackfin/initcode.c | |
| parent | af2c37378f203857d5e6c957e77a14c2da5b59d2 (diff) | |
Blackfin: fix booting with older bootroms (no EVT1)
When dropping jump block support, the assumption was that all bootroms
supported entry point redirection via the EVT1 register. Unfortunately,
this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
and older and BF561). No one really noticed earlier because these parts
usually are booted by bypassing the bootrom entirely, and older BF533
parts are not supported at all (too many anomalies).
Signed-off-by: Mike Frysinger <[email protected]>
Diffstat (limited to 'cpu/blackfin/initcode.c')
| -rw-r--r-- | cpu/blackfin/initcode.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index c0fe2c65a6c..a039cbbbce1 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -543,9 +543,11 @@ void initcode(ADI_BOOT_DATA *bootstruct) serial_putc('T'); +#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1 /* tell the bootrom where our entry point is */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE); +#endif serial_putc('>'); serial_putc('\n'); |