net: miiphybb: Convert documentation to rst

Convert the current miiphybb documentation to rst. Rename
the README.bitbangMII to bitbangmii.rst in the process.

Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>

1 files changed, 0 insertions, 39 deletions

diff --git a/doc/README.bitbangMII b/doc/README.bitbangMII
deleted file mode 100644
index 05ab20376f3..00000000000
--- a/doc/README.bitbangMII
+++ /dev/null
@@ -1,39 +0,0 @@
-This patch rewrites the miiphybb ( Bit-banged MII bus driver ) in order to
-support an arbitrary number of mii buses. This feature is useful when your
-board uses different mii buses for different phys and all (or a part) of these
-buses are implemented via bit-banging mode.
-
-The driver requires that the following macros should be defined into the board
-configuration file:
-
-CONFIG_BITBANGMII	- Enable the miiphybb driver
-
-The board code needs to fill the bb_miiphy_buses[] array with a record for
-each required bus and declare the bb_miiphy_buses_num variable with the
-number of mii buses. The record (struct bb_miiphy_bus) has the following
-fields/callbacks (see miiphy.h for details):
-
-char name[]	       - The symbolic name that must be equal to the MII bus
-			 registered name
-int (*init)()	       - Initialization function called at startup time (just
-			 before the Ethernet initialization)
-int (*mdio_active)()   - Activate the MDIO pin as output
-int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin
-int (*set_mdio)()      - Write the MDIO pin
-int (*get_mdio)()      - Read the MDIO pin
-int (*set_mdc)()       - Write the MDC pin
-int (*delay)()	       - Delay function
-void *priv	       - Private data used by board specific code
-
-The board code will look like:
-
-struct bb_miiphy_bus bb_miiphy_buses[] = {
- { .name = "miibus#1", .init = b1_init, .mdio_active = b1_mdio_active, ... },
- { .name = "miibus#2", .init = b2_init, .mdio_active = b2_mdio_active, ... },
- ...
-};
-int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
-			  sizeof(bb_miiphy_buses[0]);
-
-2009 Industrie Dial Face S.p.A.
-     Luigi 'Comio' Mantellini <[email protected]>