andes: Unify naming policy for Andes related source

Signed-off-by: Leo Yu-Chi Liang <[email protected]>

3 files changed, 0 insertions, 574 deletions

diff --git a/doc/board/AndesTech/adp-ag101p.rst b/doc/board/AndesTech/adp-ag101p.rst
deleted file mode 100644
index f867eeae3eb..00000000000
--- a/doc/board/AndesTech/adp-ag101p.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-ADP-AG101P
-==========
-
-ADP-AG101P is the SoC with AG101 hardcore CPU.
-
-AG101P SoC
-----------
-
-AG101P is the mainline SoC produced by Andes Technology using N1213 CPU core
-with FPU and DDR contoller support.
-AG101P has integrated both AHB and APB bus and many periphals for application
-and product development.
-
-
-Configurations
---------------
-
-CONFIG_MEM_REMAP:
-	Doing memory remap is essential for preparing some non-OS or RTOS
-	applications.
-
-CONFIG_SKIP_LOWLEVEL_INIT:
-	If you want to boot this system from SPI ROM and bypass e-bios (the
-	other boot loader on ROM). You should enable CONFIG_SKIP_LOWLEVEL_INIT
-	when running menuconfig or similar.
-
-Build and boot steps
---------------------
-
-Build:
-
-1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
-2. Use `make adp-ag101p_defconfig` in u-boot root to build the image.
-
-Burn U-Boot to SPI ROM
-----------------------
-
-This section will be added later.
diff --git a/doc/board/AndesTech/ae350.rst b/doc/board/AndesTech/ae350.rst
deleted file mode 100644
index 99622fd3258..00000000000
--- a/doc/board/AndesTech/ae350.rst
+++ /dev/null
@@ -1,524 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-AE350
-=====
-
-AE350 is the mainline SoC produced by Andes Technology using AndesV5 CPU core
-based on RISC-V architecture.
-
-AE350 has integrated both AHB and APB bus and many periphals for application
-and product development.
-
-AndesV5 is Andes CPU IP family that adopts RISC-V architecture.
-
-AndesV5 family includes 25, 27, 45 series.
-
-25-Series Features
-------------------
-
-CPU Core
- - 5-stage in-order execution pipeline
- - Hardware Multiplier
-      - radix-2/radix-4/radix-16/radix-256/fast
- - Hardware Divider
- - Optional branch prediction
- - Machine mode and optional user mode
- - Optional performance monitoring
-
-ISA
- - RV64I base integer instructions
- - RVC for 16-bit compressed instructions
- - RVM for multiplication and division instructions
-
-Memory subsystem
- - I & D local memory
-      - Size: 4KB to 16MB
- - Memory subsyetem soft-error protection
-      - Protection scheme: parity-checking or error-checking-and-correction (ECC)
-      - Automatic hardware error correction
-
-Bus
- - Interface Protocol
-      - Synchronous AHB (32-bit/64-bit data-width), or
-      - Synchronous AXI4 (64-bit data-width)
-
-Power management
- - Wait for interrupt (WFI) mode
-
-Debug
- - Configurable number of breakpoints: 2/4/8
- - External Debug Module
-      - AHB slave port
- - External JTAG debug transport module
-
-Platform Level Interrupt Controller (PLIC)
- - AHB slave port
- - Configurable number of interrupts: 1-1023
- - Configurable number of interrupt priorities: 3/7/15/63/127/255
- - Configurable number of targets:  1-16
- - Preempted interrupt priority stack
-
-Build and boot steps
---------------------
-
-Build:
-
-1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
-2. Use `make ae350_rv[32|64]_defconfig` in u-boot root to build the image for
-   32 or 64 bit.
-
-Verification:
-
-1. startup
-2. relocation
-3. timer driver
-4. uart driver
-5. mac driver
-6. mmc driver
-7. spi driver
-
-Steps
------
-
-1. Ping a server by mac driver
-2. Scan sd card and copy u-boot image which is booted from flash to ram by sd driver
-3. Burn this u-boot image to spi rom by spi driver
-4. Re-boot u-boot from spi flash with power off and power on
-
-Messages of U-Boot boot on AE350 board
---------------------------------------
-
-.. code-block:: none
-
-   U-Boot 2018.01-rc2-00033-g824f89a (Dec 21 2017 - 16:51:26 +0800)
-
-   DRAM:  1 GiB
-   MMC:   mmc@f0e00000: 0
-   SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
-   In:    serial@f0300000
-   Out:   serial@f0300000
-   Err:   serial@f0300000
-   Net:
-   Warning: mac@e0100000 (eth0) using random MAC address - be:dd:d7:e4:e8:10
-   eth0: mac@e0100000
-
-   RISC-V # version
-   U-Boot 2018.01-rc2-00033-gb265b91-dirty (Dec 22 2017 - 13:54:21 +0800)
-
-   riscv32-unknown-linux-gnu-gcc (GCC) 7.2.0
-   GNU ld (GNU Binutils) 2.29
-
-   RISC-V # setenv ipaddr 10.0.4.200 ;
-   RISC-V # setenv serverip 10.0.4.97 ;
-   RISC-V # ping 10.0.4.97 ;
-   Using mac@e0100000 device
-   host 10.0.4.97 is alive
-
-   RISC-V # mmc rescan
-   RISC-V # fatls mmc 0:1
-      318907   u-boot-ae350-64.bin
-        1252   hello_world_ae350_32.bin
-      328787   u-boot-ae350-32.bin
-
-   3 file(s), 0 dir(s)
-
-   RISC-V # sf probe 0:0 50000000 0
-   SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
-
-   RISC-V # sf test 0x100000 0x1000
-   SPI flash test:
-   0 erase: 36 ticks, 111 KiB/s 0.888 Mbps
-   1 check: 29 ticks, 137 KiB/s 1.096 Mbps
-   2 write: 40 ticks, 100 KiB/s 0.800 Mbps
-   3 read: 20 ticks, 200 KiB/s 1.600 Mbps
-   Test passed
-   0 erase: 36 ticks, 111 KiB/s 0.888 Mbps
-   1 check: 29 ticks, 137 KiB/s 1.096 Mbps
-   2 write: 40 ticks, 100 KiB/s 0.800 Mbps
-   3 read: 20 ticks, 200 KiB/s 1.600 Mbps
-
-   RISC-V # fatload mmc 0:1 0x600000 u-boot-ae350-32.bin
-   reading u-boot-ae350-32.bin
-   328787 bytes read in 324 ms (990.2 KiB/s)
-
-   RISC-V # sf erase 0x0 0x51000
-   SF: 331776 bytes @ 0x0 Erased: OK
-
-   RISC-V # sf write 0x600000 0x0 0x50453
-   device 0 offset 0x0, size 0x50453
-   SF: 328787 bytes @ 0x0 Written: OK
-
-   RISC-V # crc32 0x600000 0x50453
-   crc32 for 00600000 ... 00650452 ==> 692dc44a
-
-   RISC-V # crc32 0x80000000 0x50453
-   crc32 for 80000000 ... 80050452 ==> 692dc44a
-   RISC-V #
-
-   *** power-off and power-on, this U-Boot is booted from spi flash ***
-
-   U-Boot 2018.01-rc2-00032-gf67dd47-dirty (Dec 21 2017 - 13:56:03 +0800)
-
-   DRAM:  1 GiB
-   MMC:   mmc@f0e00000: 0
-   SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
-   In:    serial@f0300000
-   Out:   serial@f0300000
-   Err:   serial@f0300000
-   Net:
-   Warning: mac@e0100000 (eth0) using random MAC address - ee:4c:58:29:32:f5
-   eth0: mac@e0100000
-   RISC-V #
-
-
-Boot bbl and riscv-linux via U-Boot on QEMU
--------------------------------------------
-
-1. Build riscv-linux
-2. Build bbl and riscv-linux with --with-payload
-3. Prepare ae350.dtb
-4. Creating OS-kernel images
-
-.. code-block:: none
-
-   ./mkimage -A riscv -O linux -T kernel -C none -a 0x0000 -e 0x0000 -d bbl.bin bootmImage-bbl.bin
-   Image Name:
-   Created:      Tue Mar 13 10:06:42 2018
-   Image Type:   RISC-V Linux Kernel Image (uncompressed)
-   Data Size:    17901204 Bytes = 17481.64 KiB = 17.07 MiB
-   Load Address: 00000000
-   Entry Point:  00000000
-
-5. Copy bootmImage-bbl.bin and ae350.dtb to qemu sd card image
-6. Message of booting riscv-linux from bbl via u-boot on qemu
-
-.. code-block:: none
-
-   U-Boot 2018.03-rc4-00031-g2631273 (Mar 13 2018 - 15:02:55 +0800)
-
-   DRAM:  1 GiB
-   main-loop: WARNING: I/O thread spun for 1000 iterations
-   MMC:   mmc@f0e00000: 0
-   Loading Environment from SPI Flash... *** Warning - spi_flash_probe_bus_cs() failed, using default environment
-
-   Failed (-22)
-   In:    serial@f0300000
-   Out:   serial@f0300000
-   Err:   serial@f0300000
-   Net:
-   Warning: mac@e0100000 (eth0) using random MAC address - 02:00:00:00:00:00
-   eth0: mac@e0100000
-   RISC-V # mmc rescan
-   RISC-V # mmc part
-
-   Partition Map for MMC device 0  --   Partition Type: DOS
-
-   Part    Start Sector    Num Sectors     UUID            Type
-   RISC-V # fatls mmc 0:0
-    17901268   bootmImage-bbl.bin
-        1954   ae2xx.dtb
-
-   2 file(s), 0 dir(s)
-
-   RISC-V # fatload mmc 0:0 0x00600000 bootmImage-bbl.bin
-   17901268 bytes read in 4642 ms (3.7 MiB/s)
-   RISC-V # fatload mmc 0:0 0x2000000 ae350.dtb
-   1954 bytes read in 1 ms (1.9 MiB/s)
-   RISC-V # setenv bootm_size 0x2000000
-   RISC-V # setenv fdt_high 0x1f00000
-   RISC-V # bootm 0x00600000 - 0x2000000
-   ## Booting kernel from Legacy Image at 00600000 ...
-      Image Name:
-      Image Type:   RISC-V Linux Kernel Image (uncompressed)
-      Data Size:    17901204 Bytes = 17.1 MiB
-      Load Address: 00000000
-      Entry Point:  00000000
-      Verifying Checksum ... OK
-   ## Flattened Device Tree blob at 02000000
-      Booting using the fdt blob at 0x2000000
-      Loading Kernel Image ... OK
-      Loading Device Tree to 0000000001efc000, end 0000000001eff7a1 ... OK
-   [    0.000000] OF: fdt: Ignoring memory range 0x0 - 0x200000
-   [    0.000000] Linux version 4.14.0-00046-gf3e439f-dirty (rick@atcsqa06) (gcc version 7.1.1 20170509 (GCC)) #1 Tue Jan 9 16:34:25 CST 2018
-   [    0.000000] bootconsole [early0] enabled
-   [    0.000000] Initial ramdisk at: 0xffffffe000016a98 (12267008 bytes)
-   [    0.000000] Zone ranges:
-   [    0.000000]   DMA      [mem 0x0000000000200000-0x000000007fffffff]
-   [    0.000000]   Normal   empty
-   [    0.000000] Movable zone start for each node
-   [    0.000000] Early memory node ranges
-   [    0.000000]   node   0: [mem 0x0000000000200000-0x000000007fffffff]
-   [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
-   [    0.000000] elf_hwcap is 0x112d
-   [    0.000000] random: fast init done
-   [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516615
-   [    0.000000] Kernel command line: console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug loglevel=7
-   [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
-   [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
-   [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
-   [    0.000000] Sorting __ex_table...
-   [    0.000000] Memory: 2047832K/2095104K available (1856K kernel code, 204K rwdata, 532K rodata, 12076K init, 756K bss, 47272K reserved, 0K cma-reserved)
-   [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
-   [    0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
-   [    0.000000] riscv,cpu_intc,0: 64 local interrupts mapped
-   [    0.000000] riscv,plic0,e4000000: mapped 31 interrupts to 1/2 handlers
-   [    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
-   [    0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
-   [    0.000000] pid_max: default: 32768 minimum: 301
-   [    0.004000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
-   [    0.004000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
-   [    0.056000] devtmpfs: initialized
-   [    0.060000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
-   [    0.064000] futex hash table entries: 256 (order: 0, 6144 bytes)
-   [    0.068000] NET: Registered protocol family 16
-   [    0.080000] vgaarb: loaded
-   [    0.084000] clocksource: Switched to clocksource riscv_clocksource
-   [    0.088000] NET: Registered protocol family 2
-   [    0.092000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
-   [    0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
-   [    0.096000] TCP: Hash tables configured (established 16384 bind 16384)
-   [    0.100000] UDP hash table entries: 1024 (order: 3, 32768 bytes)
-   [    0.100000] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
-   [    0.104000] NET: Registered protocol family 1
-   [    0.616000] Unpacking initramfs...
-   [    1.220000] workingset: timestamp_bits=62 max_order=19 bucket_order=0
-   [    1.244000] io scheduler noop registered
-   [    1.244000] io scheduler cfq registered (default)
-   [    1.244000] io scheduler mq-deadline registered
-   [    1.248000] io scheduler kyber registered
-   [    1.360000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-   [    1.368000] console [ttyS0] disabled
-   [    1.372000] f0300000.serial: ttyS0 at MMIO 0xf0300020 (irq = 10, base_baud = 1228800) is a 16550A
-   [    1.392000] console [ttyS0] enabled
-   [    1.392000] ftmac100: Loading version 0.2 ...
-   [    1.396000] ftmac100 e0100000.mac eth0: irq 8, mapped at ffffffd002005000
-   [    1.400000] ftmac100 e0100000.mac eth0: generated random MAC address 6e:ac:c3:92:36:c0
-   [    1.404000] IR NEC protocol handler initialized
-   [    1.404000] IR RC5(x/sz) protocol handler initialized
-   [    1.404000] IR RC6 protocol handler initialized
-   [    1.404000] IR JVC protocol handler initialized
-   [    1.408000] IR Sony protocol handler initialized
-   [    1.408000] IR SANYO protocol handler initialized
-   [    1.408000] IR Sharp protocol handler initialized
-   [    1.408000] IR MCE Keyboard/mouse protocol handler initialized
-   [    1.412000] IR XMP protocol handler initialized
-   [    1.456000] ftsdc010 f0e00000.mmc: mmc0 - using hw SDIO IRQ
-   [    1.464000] bootconsole [early0] uses init memory and must be disabled even before the real one is ready
-   [    1.464000] bootconsole [early0] disabled
-   [    1.508000] Freeing unused kernel memory: 12076K
-   [    1.512000] This architecture does not have kernel memory protection.
-   [    1.520000] mmc0: new SD card at address 4567
-   [    1.524000] mmcblk0: mmc0:4567 QEMU! 20.0 MiB
-   [    1.844000]  mmcblk0:
-   Wed Dec  1 10:00:00 CST 2010
-   / #
-
-
-Running U-Boot SPL
-------------------
-The U-Boot SPL will boot in M mode and load the FIT image which include
-OpenSBI and U-Boot proper images. After loading progress, it will jump
-to OpenSBI first and then U-Boot proper which will run in S mode.
-
-
-How to build U-Boot SPL
------------------------
-Before building U-Boot SPL, OpenSBI must be build first. OpenSBI can be
-cloned and build for AE350 as below:
-
-.. code-block:: none
-
-        git clone https://github.com/riscv/opensbi.git
-        cd opensbi
-        make PLATFORM=andes/ae350
-
-Copy OpenSBI FW_DYNAMIC image (build/platform/andes/ae350/firmware/fw_dynamic.bin)
-into U-Boot root directory
-
-
-How to build U-Boot SPL booting from RAM
-----------------------------------------
-With ae350_rv[32|64]_spl_defconfigs:
-
-U-Boot SPL will be loaded by gdb or FSBL and runs in RAM in machine mode
-and then load FIT image from RAM device on AE350.
-
-
-How to build U-Boot SPL booting from ROM
-----------------------------------------
-With ae350_rv[32|64]_spl_xip_defconfigs:
-
-U-Boot SPL can be burned into SPI flash and run in flash in machine mode
-and then load FIT image from SPI flash or MMC device on AE350.
-
-
-Messages of U-Boot SPL boots Kernel on AE350 board
---------------------------------------------------
-
-.. code-block:: none
-
-    U-Boot SPL 2020.01-rc1-00292-g67a3313-dirty (Nov 14 2019 - 11:26:21 +0800)
-    Trying to boot from RAM
-
-    OpenSBI v0.5-1-gdd8ef28 (Nov 14 2019 11:08:39)
-       ____                    _____ ____ _____
-      / __ \                  / ____|  _ \_   _|
-     | |  | |_ __   ___ _ __ | (___ | |_) || |
-     | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
-     | |__| | |_) |  __/ | | |____) | |_) || |_
-      \____/| .__/ \___|_| |_|_____/|____/_____|
-            | |
-            |_|
-
-    Platform Name          : Andes AE350
-    Platform HART Features : RV64ACIMSUX
-    Platform Max HARTs     : 4
-    Current Hart           : 0
-    Firmware Base          : 0x0
-    Firmware Size          : 84 KB
-    Runtime SBI Version    : 0.2
-
-    PMP0: 0x0000000000000000-0x000000000001ffff (A)
-    PMP1: 0x0000000000000000-0x00000001ffffffff (A,R,W,X)
-
-
-    U-Boot 2020.01-rc1-00292-g67a3313-dirty (Nov 14 2019 - 11:26:21 +0800)
-
-    DRAM:  1 GiB
-    Flash: 64 MiB
-    MMC:   mmc@f0e00000: 0
-    Loading Environment from SPI Flash... SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
-    OK
-    In:    serial@f0300000
-    Out:   serial@f0300000
-    Err:   serial@f0300000
-    Net:   no alias for ethernet0
-
-    Warning: mac@e0100000 (eth0) using random MAC address - a2:ae:93:7b:cc:8f
-    eth0: mac@e0100000
-    Hit any key to stop autoboot:  0
-    6455 bytes read in 31 ms (203.1 KiB/s)
-    20421684 bytes read in 8647 ms (2.3 MiB/s)
-    ## Booting kernel from Legacy Image at 00600000 ...
-       Image Name:
-       Image Type:   RISC-V Linux Kernel Image (uncompressed)
-       Data Size:    20421620 Bytes = 19.5 MiB
-       Load Address: 00200000
-       Entry Point:  00200000
-       Verifying Checksum ... OK
-    ## Flattened Device Tree blob at 20000000
-       Booting using the fdt blob at 0x20000000
-       Loading Kernel Image
-       Loading Device Tree to 000000001effb000, end 000000001efff936 ... OK
-
-    Starting kernel ...
-
-    OF: fdt: Ignoring memory range 0x0 - 0x200000
-    Linux version 4.17.0-00253-g49136e10bcb2 (sqa@atcsqa07) (gcc version 7.3.0 (2019-04-06_nds64le-linux-glibc-v5_experimental)) #1 SMP PREEMPT Sat Apr 6 23:41:49 CST 2019
-    bootconsole [early0] enabled
-    Initial ramdisk at: 0x        (ptrval) (13665712 bytes)
-    Zone ranges:
-      DMA32    [mem 0x0000000000200000-0x000000003fffffff]
-      Normal   empty
-    Movable zone start for each node
-    Early memory node ranges
-      node   0: [mem 0x0000000000200000-0x000000003fffffff]
-    Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
-    software IO TLB [mem 0x3b1f8000-0x3f1f8000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-    elf_platform is rv64i2p0m2p0a2p0c2p0xv5-0p0
-    compatible privileged spec version 1.10
-    percpu: Embedded 16 pages/cpu @        (ptrval) s28184 r8192 d29160 u65536
-    Built 1 zonelists, mobility grouping on.  Total pages: 258055
-    Kernel command line: console=ttyS0,38400n8 debug loglevel=7
-    log_buf_len individual max cpu contribution: 4096 bytes
-    log_buf_len total cpu_extra contributions: 12288 bytes
-    log_buf_len min size: 16384 bytes
-    log_buf_len: 32768 bytes
-    early log buf free: 14608(89%)
-    Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
-    Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
-    Sorting __ex_table...
-    Memory: 944428K/1046528K available (3979K kernel code, 246K rwdata, 1490K rodata, 13523K init, 688K bss, 102100K reserved, 0K cma-reserved)
-    SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
-    Preemptible hierarchical RCU implementation.
-            Tasks RCU enabled.
-    NR_IRQS: 72, nr_irqs: 72, preallocated irqs: 0
-    riscv,cpu_intc,0: 64 local interrupts mapped
-    riscv,cpu_intc,1: 64 local interrupts mapped
-    riscv,cpu_intc,2: 64 local interrupts mapped
-    riscv,cpu_intc,3: 64 local interrupts mapped
-    riscv,plic0,e4000000: mapped 71 interrupts to 8/8 handlers
-    clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1bacf917bf, max_idle_ns: 881590412290 ns
-    sched_clock: 64 bits at 60MHz, resolution 16ns, wraps every 4398046511098ns
-    Console: colour dummy device 40x30
-    Calibrating delay loop (skipped), value calculated using timer frequency.. 120.00 BogoMIPS (lpj=600000)
-    pid_max: default: 32768 minimum: 301
-    Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
-    Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
-    Hierarchical SRCU implementation.
-    smp: Bringing up secondary CPUs ...
-    CPU0: online
-    CPU2: online
-    CPU3: online
-    smp: Brought up 1 node, 4 CPUs
-    devtmpfs: initialized
-    random: get_random_u32 called from bucket_table_alloc+0x198/0x1d8 with crng_init=0
-    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
-    futex hash table entries: 1024 (order: 4, 65536 bytes)
-    NET: Registered protocol family 16
-    Advanced Linux Sound Architecture Driver Initialized.
-    clocksource: Switched to clocksource riscv_clocksource
-    NET: Registered protocol family 2
-    tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
-    TCP established hash table entries: 8192 (order: 4, 65536 bytes)
-    TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
-    TCP: Hash tables configured (established 8192 bind 8192)
-    UDP hash table entries: 512 (order: 2, 16384 bytes)
-    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
-    NET: Registered protocol family 1
-    RPC: Registered named UNIX socket transport module.
-    RPC: Registered udp transport module.
-    RPC: Registered tcp transport module.
-    RPC: Registered tcp NFSv4.1 backchannel transport module.
-    Unpacking initramfs...
-    workingset: timestamp_bits=62 max_order=18 bucket_order=0
-    NFS: Registering the id_resolver key type
-    Key type id_resolver registered
-    Key type id_legacy registered
-    nfs4filelayout_init: NFSv4 File Layout Driver Registering...
-    io scheduler noop registered
-    io scheduler cfq registered (default)
-    io scheduler mq-deadline registered
-    io scheduler kyber registered
-    Console: switching to colour frame buffer device 40x30
-    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-    console [ttyS0] disabled
-    f0300000.serial: ttyS0 at MMIO 0xf0300020 (irq = 20, base_baud = 1228800) is a 16550A
-    console [ttyS0] enabled
-    console [ttyS0] enabled
-    bootconsole [early0] disabled
-    bootconsole [early0] disabled
-    loop: module loaded
-    tun: Universal TUN/TAP device driver, 1.6
-    ftmac100: Loading version 0.2 ...
-    ftmac100 e0100000.mac eth0: irq 21, mapped at         (ptrval)
-    ftmac100 e0100000.mac eth0: generated random MAC address 4e:fd:bd:f3:04:fc
-    ftsdc010 f0e00000.mmc: mmc0 - using hw SDIO IRQ
-    mmc0: new SDHC card at address d555
-    ftssp010 card registered!
-    mmcblk0: mmc0:d555 SD04G 3.79 GiB
-    NET: Registered protocol family 10
-     mmcblk0: p1
-    Segment Routing with IPv6
-    sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
-    NET: Registered protocol family 17
-    NET: Registered protocol family 15
-    ALSA device list:
-      #0: ftssp_ac97 controller
-    Freeing unused kernel memory: 13520K
-    This architecture does not have kernel memory protection.
-    Sysinit starting
-    Sat Apr  6 23:33:53 CST 2019
-    nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
-
-    ~ #
diff --git a/doc/board/AndesTech/index.rst b/doc/board/AndesTech/index.rst
deleted file mode 100644
index cacc5791a91..00000000000
--- a/doc/board/AndesTech/index.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-Andes Tech
-==========
-
-.. toctree::
-   :maxdepth: 2
-
-   adp-ag101p
-   ae350