Merge branch '2021-02-14-remove-some-boards'

- Remove some boards that are behind on conversions and have had their
  removal acked or suggested by the relevant maintainers.

5 files changed, 0 insertions, 187 deletions

diff --git a/doc/arch/sh.rst b/doc/arch/sh.rst
index 3a3f92dd3e2..3e3759d68b2 100644
--- a/doc/arch/sh.rst
+++ b/doc/arch/sh.rst
@@ -26,10 +26,6 @@ Renesas SH7722
 ^^^^^^^^^^^^^^
 This CPU has the SH4AL-DSP core.
 
-Renesas SH7780
-^^^^^^^^^^^^^^
-This CPU has the SH4A core.
-
 Supported Boards
 ----------------
 
@@ -67,20 +63,6 @@ Support devices are:
    - NOR Flash
    - Marubun PCMCIA
 
-Renesas R7780MP
-^^^^^^^^^^^^^^^
-Board specific code is in board/r7780mp
-To use this board, type "make r7780mp_config".
-Support devices are:
-
-   - SCIF
-   - DDR-SDRAM
-   - NOR Flash
-   - Compact Flash
-   - ASIX ethernet
-   - SH7780 PCI bridge
-   - RTL8110 ethernet
-
 In SuperH, S-record and binary of made u-boot work on the memory.
 When u-boot is written in the flash, it is necessary to change the
 address by using 'objcopy'::
diff --git a/doc/board/index.rst b/doc/board/index.rst
index 08c167b6b53..a70d2de19de 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -18,7 +18,6 @@ Board-specific doc
    intel/index
    kontron/index
    microchip/index
-   renesas/index
    rockchip/index
    sifive/index
    sipeed/index
diff --git a/doc/board/renesas/index.rst b/doc/board/renesas/index.rst
deleted file mode 100644
index 34e62baff62..00000000000
--- a/doc/board/renesas/index.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-Renesas
-=======
-
-.. toctree::
-   :maxdepth: 2
-
-   sh7752evb
-   sh7753evb
diff --git a/doc/board/renesas/sh7752evb.rst b/doc/board/renesas/sh7752evb.rst
deleted file mode 100644
index 272d6dde053..00000000000
--- a/doc/board/renesas/sh7752evb.rst
+++ /dev/null
@@ -1,79 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-R0P7752C00000RZ board
-=====================
-
-This board specification
-------------------------
-
-The R0P7752C00000RZ(board config name:sh7752evb) has the following device:
-
- - SH7752 (SH-4A)
- - DDR3-SDRAM 512MB
- - SPI ROM 8MB
- - Gigabit Ethernet controllers
- - eMMC 4GB
-
-
-Configuration for This board
-----------------------------
-
-You can select the configuration as follows:
-
- - make sh7752evb_config
-
-
-This board specific command
----------------------------
-
-This board has the following its specific command:
-
-write_mac:
-  You can write MAC address to SPI ROM.
-
-Usage 1: Write MAC address
-
-.. code-block:: none
-
-   write_mac [GETHERC ch0] [GETHERC ch1]
-
-   For example:
-   => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f
-
-* We have to input the command as a single line (without carriage return)
-* We have to reset after input the command.
-
-Usage 2: Show current data
-
-.. code-block:: none
-
-   write_mac
-
-   For example:
-   => write_mac
-      GETHERC ch0 = 74:90:50:00:33:9e
-      GETHERC ch1 = 74:90:50:00:33:9f
-
-
-Update SPI ROM
---------------
-
-1. Copy u-boot image to RAM area.
-2. Probe SPI device.
-
-.. code-block:: none
-
-   => sf probe 0
-   SF: Detected MX25L6405D with page size 64KiB, total 8 MiB
-
-3. Erase SPI ROM.
-
-.. code-block:: none
-
-   => sf erase 0 80000
-
-4. Write u-boot image to SPI ROM.
-
-.. code-block:: none
-
-   => sf write 0x48000000 0 80000
diff --git a/doc/board/renesas/sh7753evb.rst b/doc/board/renesas/sh7753evb.rst
deleted file mode 100644
index c62a82435cb..00000000000
--- a/doc/board/renesas/sh7753evb.rst
+++ /dev/null
@@ -1,79 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-SH7753 EVB board
-================
-
-This board specification
-------------------------
-
-The SH7753 EVB (board config name:sh7753evb) has the following device:
-
- - SH7753 (SH-4A)
- - DDR3-SDRAM 512MB
- - SPI ROM 8MB
- - Gigabit Ethernet controllers
- - eMMC 4GB
-
-
-Configuration for This board
-----------------------------
-
-You can select the configuration as follows:
-
- - make sh7753evb_config
-
-
-This board specific command
----------------------------
-
-This board has the following its specific command:
-
-write_mac:
-  You can write MAC address to SPI ROM.
-
-Usage 1: Write MAC address
-
-.. code-block:: none
-
-   write_mac [GETHERC ch0] [GETHERC ch1]
-
-   For example:
-   => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f
-
-* We have to input the command as a single line (without carriage return)
-* We have to reset after input the command.
-
-Usage 2: Show current data
-
-.. code-block:: none
-
-   write_mac
-
-   For example:
-   => write_mac
-      GETHERC ch0 = 74:90:50:00:33:9e
-      GETHERC ch1 = 74:90:50:00:33:9f
-
-
-Update SPI ROM
---------------
-
-1. Copy u-boot image to RAM area.
-2. Probe SPI device.
-
-.. code-block:: none
-
-   => sf probe 0
-   SF: Detected MX25L6405D with page size 64KiB, total 8 MiB
-
-3. Erase SPI ROM.
-
-.. code-block:: none
-
-   => sf erase 0 80000
-
-4. Write u-boot image to SPI ROM.
-
-.. code-block:: none
-
-   => sf write 0x48000000 0 80000