Merge tag '20200316-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next

i2c: for next
- i2c-gpio: make it possible to run deblock sequence on driver probe
- i2c-gpio: add clock stretching support
- updates the Designware I2C driver for high speed mode,
  fix a bug and add some improvements.
- add DM support for memory based bootcounter driver

2 files changed, 25 insertions, 0 deletions

diff --git a/doc/device-tree-bindings/i2c/i2c-gpio.txt b/doc/device-tree-bindings/i2c/i2c-gpio.txt
index ba56ed5dea1..b06b8299337 100644
--- a/doc/device-tree-bindings/i2c/i2c-gpio.txt
+++ b/doc/device-tree-bindings/i2c/i2c-gpio.txt
@@ -16,6 +16,10 @@ Optional:
    The resulting transfer speed can be adjusted by setting the delay[us]
    between gpio-toggle operations. Speed [Hz] = 1000000 / 4 * udelay[us],
    It not defined, then default is 5us (~50KHz).
+* i2c-gpio,deblock
+   Run deblocking sequence when the driver gets probed.
+* i2c-gpio,scl-output-only;
+   Set if SCL is an output only
 
 Example:
 
diff --git a/doc/device-tree-bindings/misc/bootcounter.txt b/doc/device-tree-bindings/misc/bootcounter.txt
new file mode 100644
index 00000000000..d32fbc37b2e
--- /dev/null
+++ b/doc/device-tree-bindings/misc/bootcounter.txt
@@ -0,0 +1,21 @@
+U-Boot bootcounter Devicetree Binding
+=====================================
+
+The device tree node describes the U-Boot bootcounter
+memory based device binding.
+
+Required properties :
+
+- compatible : "u-boot,bootcount";
+- single-word : set this, if you have only one word space
+    for storing the bootcounter.
+
+Example
+-------
+
+MPC83xx based board:
+
+bootcount@0x13ff8 {
+	compatible = "u-boot,bootcount";
+	reg = <0x13ff8 0x08>;
+};