diff options
| author | Svyatoslav Ryhel <[email protected]> | 2023-06-30 10:29:06 +0300 |
|---|---|---|
| committer | Thierry Reding <[email protected]> | 2023-06-30 15:20:37 +0200 |
| commit | bdf9dead86f06c7d6980c399a4a6339430b531ec (patch) | |
| tree | 21c4fa27edd470b596d44f4afdac0cee239645ad /doc | |
| parent | 623a8c812e127c4f008dfbb60f29edc8c7d94e09 (diff) | |
board: htc: endeavoru: add One X support
The HTC One X is a touchscreen-based, slate-sized smartphone
designed and manufactured by HTC that runs the Android operating
system. The One X features a 4.7" display, an Nvidia Tegra 3
quad-core chip, 1 GB of RAM and non-extendable 32 GB of internal
storage. UART-A is default debug port.
Tested-by: Andreas Westman Dorcsak <[email protected]>
Tested-by: Ion Agorria <[email protected]>
Tested-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/board/htc/endeavoru.rst | 89 | ||||
| -rw-r--r-- | doc/board/htc/index.rst | 9 | ||||
| -rw-r--r-- | doc/board/index.rst | 1 |
3 files changed, 99 insertions, 0 deletions
diff --git a/doc/board/htc/endeavoru.rst b/doc/board/htc/endeavoru.rst new file mode 100644 index 00000000000..950c713f2fa --- /dev/null +++ b/doc/board/htc/endeavoru.rst @@ -0,0 +1,89 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for the HTC One X (endeavoru) +==================================== + +``DISCLAMER!`` Moving your HTC ONe X to use U-Boot assumes +replacement of the vendor hboot. Vendor android firmwares +will no longer be able to run on the device. +This replacement IS reversible. + +Quick Start +----------- + +- Build U-Boot +- Pack U-Boot into repart-block +- Flash repart-block into the eMMC +- Boot +- Self Upgrading + +Build U-Boot +------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-linux-gnueabi- + $ make endeavoru_defconfig + $ make + +After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin`` +image, ready for flashing (but check the next section for additional +adjustments). + +Pack U-Boot into repar-block +---------------------------- + +``DISCLAMER!`` All questions related to re-crypt work should be +asked in re-crypt repo issues. NOT HERE! + +re-crypt is a small script which packs ``u-boot-dtb-tegra.bin`` in +form usable by device. This process is required only on the first +installation or to recover the device in case of a failed update. + +.. code-block:: bash + + $ git clone https://github.com/clamor-s/re-crypt.git + $ cd re-crypt # place your u-boot-dtb-regra.bin here + $ ./re-crypt.sh -d endeavoru + +Script will produce you a ``repart-block.bin`` ready to flash. + +Flash repart-block into the eMMC +-------------------------------- + +``DISCLAMER!`` All questions related to NvFlash should be asked +in the proper place. NOT HERE! Flashing repart-block will erase +all your eMMC, so make a backup before! + +``repart-block.bin`` contains BCT and bootloader in encrypted state +in form which can just be written RAW at the start of eMMC. + +.. code-block:: bash + + $ wheelie --blob blob.bin + $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin + +Boot +---- + +After flashing ``repart-block.bin`` the device should reboot and turn +itself off. This is normal behavior if no boot configuration is +found. + +To boot Linux, U-Boot will look for an ``extlinux.conf`` configuration +on eMMC. Additionally if Volume Down button is pressed while booting +device will enter bootmenu. Bootmenu contains entries to mount eMMC as +mass storage, fastboot, reboot, reboot RCM, poweroff, enter U-Boot +console and update bootloader (check next chapter). + +Flashing ``repart-block.bin`` eliminates vendor restriction on eMMC +and allows the user to use/partition it in any way the user desires. + +Self Upgrading +-------------- + +Place your ``u-boot-dtb-tegra.bin`` on the first partition of the +eMMC (using ability of u-boot to mount it). Enter bootmenu, choose +update bootloader option with Power button and U-Boot should update +itself. Once the process is completed, U-Boot will ask to press any +button to reboot. diff --git a/doc/board/htc/index.rst b/doc/board/htc/index.rst new file mode 100644 index 00000000000..955c9b9e03d --- /dev/null +++ b/doc/board/htc/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +HTC +=== + +.. toctree:: + :maxdepth: 2 + + endeavoru diff --git a/doc/board/index.rst b/doc/board/index.rst index 3cfec7caec7..2e11dbb06f5 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -26,6 +26,7 @@ Board-specific doc gateworks/index google/index highbank/index + htc/index intel/index kontron/index lg/index |
