diff options
| author | Tom Rini <[email protected]> | 2025-11-07 16:04:16 -0600 |
|---|---|---|
| committer | Tom Rini <[email protected]> | 2025-11-07 16:45:09 -0600 |
| commit | 5e5b630eef2eecfe898b2ce3e719a6dc79211569 (patch) | |
| tree | 587e87d84e5251e9667e95c8c3c9ec58ee1409d9 /drivers/clk | |
| parent | 928af44314a1a086e946ef3c0901d40bdb3e19a9 (diff) | |
| parent | 475dec28805bf0c84ce83ec06d452b4ee8b5f9a9 (diff) | |
Merge patch series "arm: airoha: add support for en7523 based boards"
Mikhail Kshevetskiy <[email protected]> says:
This patch series adds basic support for the boards based on Airoha
EN7523/EN7529/EN7562 SoCs. Due to ATF restrictions these boards are
able to run 32-bit OS only.
This patch series adds support for the following hardware:
* console UART
* ethernet controller/switch
* spinand flash (in non-dma mode)
The following issues may be expected:
* Extra slow UBI attaching in U-Boot (up to 20 sec with fastmap enabled).
This is caused by the lack of DMA support in the U-Boot airoha-snfi driver.
* Linux airoha-snfi driver in some cases might damage you flash data
(see: https://lore.kernel.org/lkml/[email protected]/)
* Latest linux kernel is recommended to properly support flashes
with more than one plane per lun
(see: https://lore.kernel.org/lkml/[email protected]/)
* It's NOT recommended to use flashes working in continuous mode because
U-Boot airoha-snfi driver does not support such flashes properly.
The patches was tested on the board:
- SoC: Airoha EN7562
- RAM: 512 MB
- SPI NAND: 4 Gbit, made by Toshiba
- Linux boot: was NOT tested
The U-Boot was chain-loaded from the running U-Boot. Airoha ATF-2.3 does
not allow easily chain-loading of U-Boot from U-Boot, so a special FIT
image (mimic linux kernel) was created
1) Create u-boot.its file with the following contents:
=== cut here ===
/dts-v1/;
/ {
description = "ARM OpenWrt FIT (Flattened Image Tree)";
#address-cells = <1>;
images {
u-boot-ram {
description = "OpenWrt U-Boot RAM image";
data = /incbin/("u-boot.bin.lzma");
type = "kernel";
arch = "arm";
os = "linux";
compression = "lzma";
load = <0x81e00000>;
entry = <0x81e00000>;
hash@1 {
algo = "crc32";
};
hash@2 {
algo = "sha1";
};
};
fdt-1 {
description = "OpenWrt device tree blob";
data = /incbin/("dts/upstream/src/arm/airoha/en7523-evb.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
hash@1 {
algo = "crc32";
};
hash@2 {
algo = "sha1";
};
};
};
configurations {
default = "config-ram-uboot";
config-ram-uboot {
description = "OpenWrt RAM U-Boot";
kernel = "u-boot-ram";
fdt = "fdt-1";
};
};
};
==================
2) Create u-boot.itb image to chain-load new u-boot from the old one
lzma_alone e u-boot.bin u-boot.bin.lzma
mkimage -f u-boot.its u-boot.itb
3) Load new u-boot from the old one
U-Boot> tftpboot u-boot.itb && bootm
Link: https://lore.kernel.org/r/[email protected]
Diffstat (limited to 'drivers/clk')
| -rw-r--r-- | drivers/clk/airoha/clk-airoha.c | 127 |
1 files changed, 118 insertions, 9 deletions
diff --git a/drivers/clk/airoha/clk-airoha.c b/drivers/clk/airoha/clk-airoha.c index 1b2c4c98de5..49dbca82135 100644 --- a/drivers/clk/airoha/clk-airoha.c +++ b/drivers/clk/airoha/clk-airoha.c @@ -16,7 +16,7 @@ #include <dm/device_compat.h> #include <dm/lists.h> #include <regmap.h> -#include <syscon.h> +#include <asm/arch/scu-regmap.h> #include <dt-bindings/clock/en7523-clk.h> @@ -26,6 +26,7 @@ #define REG_SPI_CLK_DIV_SEL 0x1c4 #define REG_SPI_CLK_FREQ_SEL 0x1c8 #define REG_NPU_CLK_DIV_SEL 0x1fc +#define REG_CRYPTO_CLKSRC 0x200 #define REG_NP_SCU_PCIC 0x88 #define REG_NP_SCU_SSTR 0x9c @@ -33,6 +34,7 @@ #define REG_PCIE_XSI1_SEL_MASK GENMASK(12, 11) #define REG_CRYPTO_CLKSRC2 0x20c +#define EN7523_MAX_CLKS 8 #define EN7581_MAX_CLKS 9 struct airoha_clk_desc { @@ -66,14 +68,119 @@ struct airoha_clk_soc_data { }; static const u32 gsw_base[] = { 400000000, 500000000 }; +static const u32 emi_base[] = { 333000000, 400000000 }; +static const u32 bus_base[] = { 500000000, 540000000 }; static const u32 slic_base[] = { 100000000, 3125000 }; - +static const u32 npu_base[] = { 333000000, 400000000, 500000000 }; +/* EN7581 */ static const u32 emi7581_base[] = { 540000000, 480000000, 400000000, 300000000 }; static const u32 bus7581_base[] = { 600000000, 540000000 }; static const u32 npu7581_base[] = { 800000000, 750000000, 720000000, 600000000 }; static const u32 crypto_base[] = { 540000000, 480000000 }; static const u32 emmc7581_base[] = { 200000000, 150000000 }; +static const struct airoha_clk_desc en7523_base_clks[EN7523_MAX_CLKS] = { + [EN7523_CLK_GSW] = { + .id = EN7523_CLK_GSW, + .name = "gsw", + + .base_reg = REG_GSW_CLK_DIV_SEL, + .base_bits = 1, + .base_shift = 8, + .base_values = gsw_base, + .n_base_values = ARRAY_SIZE(gsw_base), + + .div_bits = 3, + .div_shift = 0, + .div_step = 1, + .div_offset = 1, + }, + [EN7523_CLK_EMI] = { + .id = EN7523_CLK_EMI, + .name = "emi", + + .base_reg = REG_EMI_CLK_DIV_SEL, + .base_bits = 1, + .base_shift = 8, + .base_values = emi_base, + .n_base_values = ARRAY_SIZE(emi_base), + + .div_bits = 3, + .div_shift = 0, + .div_step = 1, + .div_offset = 1, + }, + [EN7523_CLK_BUS] = { + .id = EN7523_CLK_BUS, + .name = "bus", + + .base_reg = REG_BUS_CLK_DIV_SEL, + .base_bits = 1, + .base_shift = 8, + .base_values = bus_base, + .n_base_values = ARRAY_SIZE(bus_base), + + .div_bits = 3, + .div_shift = 0, + .div_step = 1, + .div_offset = 1, + }, + [EN7523_CLK_SLIC] = { + .id = EN7523_CLK_SLIC, + .name = "slic", + + .base_reg = REG_SPI_CLK_FREQ_SEL, + .base_bits = 1, + .base_shift = 0, + .base_values = slic_base, + .n_base_values = ARRAY_SIZE(slic_base), + + .div_reg = REG_SPI_CLK_DIV_SEL, + .div_bits = 5, + .div_shift = 24, + .div_val0 = 20, + .div_step = 2, + }, + [EN7523_CLK_SPI] = { + .id = EN7523_CLK_SPI, + .name = "spi", + + .base_reg = REG_SPI_CLK_DIV_SEL, + + .base_value = 400000000, + + .div_bits = 5, + .div_shift = 8, + .div_val0 = 40, + .div_step = 2, + }, + [EN7523_CLK_NPU] = { + .id = EN7523_CLK_NPU, + .name = "npu", + + .base_reg = REG_NPU_CLK_DIV_SEL, + .base_bits = 2, + .base_shift = 8, + .base_values = npu_base, + .n_base_values = ARRAY_SIZE(npu_base), + + .div_bits = 3, + .div_shift = 0, + .div_step = 1, + .div_offset = 1, + }, + [EN7523_CLK_CRYPTO] = { + .id = EN7523_CLK_CRYPTO, + .name = "crypto", + + .base_reg = REG_CRYPTO_CLKSRC, + .base_bits = 1, + .base_shift = 0, + .base_values = emi_base, + .n_base_values = ARRAY_SIZE(emi_base), + } +}; + static const struct airoha_clk_desc en7581_base_clks[EN7581_MAX_CLKS] = { [EN7523_CLK_GSW] = { .id = EN7523_CLK_GSW, @@ -400,14 +507,8 @@ const struct clk_ops airoha_clk_ops = { static int airoha_clk_probe(struct udevice *dev) { struct airoha_clk_priv *priv = dev_get_priv(dev); - ofnode chip_scu_node; - - chip_scu_node = ofnode_by_compatible(ofnode_null(), - "airoha,en7581-chip-scu"); - if (!ofnode_valid(chip_scu_node)) - return -EINVAL; - priv->chip_scu_map = syscon_node_to_regmap(chip_scu_node); + priv->chip_scu_map = airoha_get_chip_scu_regmap(); if (IS_ERR(priv->chip_scu_map)) return PTR_ERR(priv->chip_scu_map); @@ -431,12 +532,20 @@ static int airoha_clk_bind(struct udevice *dev) return ret; } +static const struct airoha_clk_soc_data en7523_data = { + .num_clocks = ARRAY_SIZE(en7523_base_clks), + .descs = en7523_base_clks, +}; + static const struct airoha_clk_soc_data en7581_data = { .num_clocks = ARRAY_SIZE(en7581_base_clks), .descs = en7581_base_clks, }; static const struct udevice_id airoha_clk_ids[] = { + { .compatible = "airoha,en7523-scu", + .data = (ulong)&en7523_data, + }, { .compatible = "airoha,en7581-scu", .data = (ulong)&en7581_data, }, |
