rtc: ds1337: Remove various legacy code and update dependencies

At this point there are no users of this driver which do not enable
DM_RTC, so remove the legacy code and express the depdendency in
Kconfig. We can further remove code related to RTC chips / options that
are neither available in Kconfig nor set by any platforms.

Signed-off-by: Tom Rini <[email protected]>

2 files changed, 2 insertions, 155 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cb0a672668e..648948cc735 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -73,6 +73,7 @@ config RTC_DS1307
 
 config RTC_DS1337
 	bool "Enable DS1337 driver"
+	depends on DM_RTC
 	help
 	  Support for Dallas Semiconductor (now Maxim) DS1337/8/9 compatible
 	  Real Time Clock devices.
diff --git a/drivers/rtc/ds1337.c b/drivers/rtc/ds1337.c
index 77544298d8a..e9db6220c55 100644
--- a/drivers/rtc/ds1337.c
+++ b/drivers/rtc/ds1337.c
@@ -21,7 +21,6 @@
 /*
  * RTC register addresses
  */
-#if defined CONFIG_RTC_DS1337
 #define RTC_SEC_REG_ADDR	0x0
 #define RTC_MIN_REG_ADDR	0x1
 #define RTC_HR_REG_ADDR		0x2
@@ -32,18 +31,6 @@
 #define RTC_CTL_REG_ADDR	0x0e
 #define RTC_STAT_REG_ADDR	0x0f
 #define RTC_TC_REG_ADDR		0x10
-#elif defined CONFIG_RTC_DS1388
-#define RTC_SEC_REG_ADDR	0x1
-#define RTC_MIN_REG_ADDR	0x2
-#define RTC_HR_REG_ADDR		0x3
-#define RTC_DAY_REG_ADDR	0x4
-#define RTC_DATE_REG_ADDR	0x5
-#define RTC_MON_REG_ADDR	0x6
-#define RTC_YR_REG_ADDR		0x7
-#define RTC_CTL_REG_ADDR	0x0c
-#define RTC_STAT_REG_ADDR	0x0b
-#define RTC_TC_REG_ADDR		0x0a
-#endif
 
 /*
  * RTC control register bits
@@ -62,132 +49,6 @@
 #define RTC_STAT_BIT_A2F	0x2	/* Alarm 2 flag			*/
 #define RTC_STAT_BIT_OSF	0x80	/* Oscillator stop flag		*/
 
-#if !CONFIG_IS_ENABLED(DM_RTC)
-static uchar rtc_read (uchar reg);
-static void rtc_write (uchar reg, uchar val);
-
-/*
- * Get the current time from the RTC
- */
-int rtc_get (struct rtc_time *tmp)
-{
-	int rel = 0;
-	uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
-
-	control = rtc_read (RTC_CTL_REG_ADDR);
-	status = rtc_read (RTC_STAT_REG_ADDR);
-	sec = rtc_read (RTC_SEC_REG_ADDR);
-	min = rtc_read (RTC_MIN_REG_ADDR);
-	hour = rtc_read (RTC_HR_REG_ADDR);
-	wday = rtc_read (RTC_DAY_REG_ADDR);
-	mday = rtc_read (RTC_DATE_REG_ADDR);
-	mon_cent = rtc_read (RTC_MON_REG_ADDR);
-	year = rtc_read (RTC_YR_REG_ADDR);
-
-	/* No century bit, assume year 2000 */
-#ifdef CONFIG_RTC_DS1388
-	mon_cent |= 0x80;
-#endif
-
-	debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
-		"hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
-		year, mon_cent, mday, wday, hour, min, sec, control, status);
-
-	if (status & RTC_STAT_BIT_OSF) {
-		printf ("### Warning: RTC oscillator has stopped\n");
-		/* clear the OSF flag */
-		rtc_write (RTC_STAT_REG_ADDR,
-			   rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
-		rel = -1;
-	}
-
-	tmp->tm_sec  = bcd2bin (sec & 0x7F);
-	tmp->tm_min  = bcd2bin (min & 0x7F);
-	tmp->tm_hour = bcd2bin (hour & 0x3F);
-	tmp->tm_mday = bcd2bin (mday & 0x3F);
-	tmp->tm_mon  = bcd2bin (mon_cent & 0x1F);
-	tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
-	tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
-	tmp->tm_yday = 0;
-	tmp->tm_isdst= 0;
-
-	debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	return rel;
-}
-
-/*
- * Set the RTC
- */
-int rtc_set (struct rtc_time *tmp)
-{
-	uchar century;
-
-	debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
-
-	century = (tmp->tm_year >= 2000) ? 0x80 : 0;
-	rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century);
-
-	rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
-	rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
-	rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
-	rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
-	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
-
-	return 0;
-}
-
-/*
- * Reset the RTC.  We also enable the oscillator output on the
- * SQW/INTB* pin and program it for 32,768 Hz output. Note that
- * according to the datasheet, turning on the square wave output
- * increases the current drain on the backup battery from about
- * 600 nA to 2uA. Define CONFIG_RTC_DS1337_NOOSC if you wish to turn
- * off the OSC output.
- */
-
-#ifdef CONFIG_RTC_DS1337_NOOSC
- #define RTC_DS1337_RESET_VAL \
-	(RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
-#else
- #define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
-#endif
-void rtc_reset (void)
-{
-#ifdef CONFIG_RTC_DS1337
-	rtc_write (RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL);
-#elif defined CONFIG_RTC_DS1388
-	rtc_write(RTC_CTL_REG_ADDR, 0x0); /* hw default */
-#endif
-#ifdef CONFIG_RTC_DS1339_TCR_VAL
-	rtc_write (RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL);
-#endif
-#ifdef CONFIG_RTC_DS1388_TCR_VAL
-	rtc_write(RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL);
-#endif
-}
-
-/*
- * Helper functions
- */
-
-static
-uchar rtc_read (uchar reg)
-{
-	return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg));
-}
-
-static void rtc_write (uchar reg, uchar val)
-{
-	i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val);
-}
-#else
 static uchar rtc_read(struct udevice *dev, uchar reg)
 {
 	return dm_i2c_reg_read(dev, reg);
@@ -213,11 +74,6 @@ static int ds1337_rtc_get(struct udevice *dev, struct rtc_time *tmp)
 	mon_cent = rtc_read(dev, RTC_MON_REG_ADDR);
 	year = rtc_read(dev, RTC_YR_REG_ADDR);
 
-	/* No century bit, assume year 2000 */
-#ifdef CONFIG_RTC_DS1388
-	mon_cent |= 0x80;
-#endif
-
 	debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x\n",
 	      year, mon_cent, mday, wday);
 	debug("hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
@@ -278,17 +134,8 @@ static int ds1337_rtc_set(struct udevice *dev, const struct rtc_time *tmp)
 #endif
 static int ds1337_rtc_reset(struct udevice *dev)
 {
-#ifdef CONFIG_RTC_DS1337
 	rtc_write(dev, RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL);
-#elif defined CONFIG_RTC_DS1388
-	rtc_write(dev, RTC_CTL_REG_ADDR, 0x0); /* hw default */
-#endif
-#ifdef CONFIG_RTC_DS1339_TCR_VAL
-	rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL);
-#endif
-#ifdef CONFIG_RTC_DS1388_TCR_VAL
-	rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL);
-#endif
+
 	return 0;
 }
 
@@ -311,4 +158,3 @@ U_BOOT_DRIVER(rtc_ds1337) = {
 	.of_match = ds1337_rtc_ids,
 	.ops    = &ds1337_rtc_ops,
 };
-#endif