video: Drop references to CONFIG_VIDEO et al

Drop the Kconfigs which are not used and all references to them. In
particular, this drops CONFIG_VIDEO to avoid confusion and allow us to
eventually rename CONFIG_DM_VIDEO to CONFIG_VIDEO.

Also drop the prototype for video_get_info_str() which is no-longer used.

Signed-off-by: Simon Glass <[email protected]>
Acked-by: Jason Liu <[email protected]>

2 files changed, 3 insertions, 61 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index c8c85c69276..d0745463b9a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -708,39 +708,9 @@ config VIDEO
 	  model. Video drivers typically provide a colour text console and
 	  cursor.
 
-config VGA_AS_SINGLE_DEVICE
-	bool "Set the video as an output-only device"
-	depends on CFB_CONSOLE
-	default y
-	help
-	  If enable the framebuffer device will be initialized as an
-	  output-only device. The Keyboard driver will not be set up. This
-	  may be used if you have no keyboard device, or more than one
-	  (USB Keyboard, AT Keyboard).
-
-config VIDEO_SW_CURSOR
-	bool "Enable a software cursor"
-	depends on CFB_CONSOLE
-	default y if CFB_CONSOLE
-	help
-	  This draws a cursor after the last character. No blinking is
-	  provided. This makes it possible to see the current cursor
-	  position when entering text on the console. It is recommended to
-	  enable this.
-
-config CONSOLE_EXTRA_INFO
-	bool "Display additional board information"
-	depends on CFB_CONSOLE
-	help
-	  Display additional board information strings that normally go to
-	  the serial port. When this option is enabled, a board-specific
-	  function video_get_info_str() is called to get the string for
-	  each line of the display. The function should return the string,
-	  which can be empty if there is nothing to display for that line.
-
 config CONSOLE_SCROLL_LINES
 	int "Number of lines to scroll the console by"
-	depends on CFB_CONSOLE || DM_VIDEO || LCD
+	depends on DM_VIDEO || LCD
 	default 1
 	help
 	  When the console need to be scrolled, this is the number of
@@ -748,28 +718,6 @@ config CONSOLE_SCROLL_LINES
 	  console jump but can help speed up operation when scrolling
 	  is slow.
 
-config SYS_CONSOLE_BG_COL
-	hex "Background colour"
-	depends on CFB_CONSOLE
-	default 0x00
-	help
-	  Defines the background colour for the console. The value is from
-	  0x00 to 0xff and the meaning depends on the graphics card.
-	  Typically, 0x00 means black and 0xff means white. Do not set
-	  the background and foreground to the same colour or you will see
-	  nothing.
-
-config SYS_CONSOLE_FG_COL
-	hex "Foreground colour"
-	depends on CFB_CONSOLE
-	default 0xa0
-	help
-	  Defines the foreground colour for the console. The value is from
-	  0x00 to 0xff and the meaning depends on the graphics card.
-	  Typically, 0x00 means black and 0xff means white. Do not set
-	  the background and foreground to the same colour or you will see
-	  nothing.
-
 config LCD
 	bool "Enable legacy LCD support"
 	help
@@ -967,7 +915,7 @@ config VIDEO_BMP_GZIP
 
 config VIDEO_BMP_RLE8
 	bool "Run length encoded BMP image (RLE8) support"
-	depends on DM_VIDEO || CFB_CONSOLE
+	depends on DM_VIDEO
 	help
 	  If this option is set, the 8-bit RLE compressed BMP images
 	  is supported.
diff --git a/drivers/video/nexell_display.c b/drivers/video/nexell_display.c
index 0a9cea680fd..090fd6ea326 100644
--- a/drivers/video/nexell_display.c
+++ b/drivers/video/nexell_display.c
@@ -562,7 +562,6 @@ static int nx_display_probe(struct udevice *dev)
 	}
 
 	struct nx_display_dev *dp;
-	/* unsigned int pp_index = 0; */
 
 	dp = nx_display_setup();
 	if (!dp) {
@@ -572,9 +571,7 @@ static int nx_display_probe(struct udevice *dev)
 	}
 
 	switch (dp->depth) {
-#if 0 /* GDF_16BIT_565RGB is not defined in video.h */
 	case 2:
-		pp_index = GDF_16BIT_565RGB;
 		uc_priv->bpix = VIDEO_BPP16;
 		break;
 	case 3:
@@ -582,10 +579,8 @@ static int nx_display_probe(struct udevice *dev)
 		 * type video_log2_bpp
 		 */
 	case 4:
-		pp_index = GDF_32BIT_X888RGB;
 		uc_priv->bpix = VIDEO_BPP32;
 		break;
-#endif
 	default:
 		printf("fail : not support LCD bit per pixel %d\n",
 		       dp->depth * 8);
@@ -598,8 +593,7 @@ static int nx_display_probe(struct udevice *dev)
 
 	/*
 	 * set environment variable "fb_addr" (frame buffer address), required
-	 * for splash image. Because drv_video_init() in common/stdio.c is only
-	 * called when CONFIG_VIDEO is set (and not if CONFIG_DM_VIDEO is set).
+	 * for splash image, which is not set if CONFIG_DM_VIDEO is enabled).
 	 */
 	sprintf(addr, "0x%x", dp->fb_addr);
 	debug("%s(): env_set(\"fb_addr\", %s) ...\n", __func__, addr);