arm: ti: Introduce back omap4 support

omap4 support was dropped by b0ee3fe642c ("arm: ti: Remove omap4 platform
support") because the supported boards hadn't done the conversion to
CONFIG_DM_I2C in time. It still exists some omap4-based products and
they could benefit from the latest U-Boot support for obvious security
reasons.

Revert part of b0ee3fe642c to introduce back a minimal support for the
omap4 platform.
Fix the checkpatch's warning/errors induced by this revert. Following
warnings are still present:
| arch/arm/include/asm/arch-omap4/clock.h:445: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
| arch/arm/mach-omap2/omap4/hwinit.c:24: WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
| arch/arm/mach-omap2/omap4/sdram_elpida.c:142: CHECK: Avoid CamelCase: <tRPab>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:143: CHECK: Avoid CamelCase: <tRCD>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:144: CHECK: Avoid CamelCase: <tWR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:145: CHECK: Avoid CamelCase: <tRASmin>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:146: CHECK: Avoid CamelCase: <tRRD>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:147: CHECK: Avoid CamelCase: <tWTRx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:148: CHECK: Avoid CamelCase: <tXSR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:149: CHECK: Avoid CamelCase: <tXPx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:150: CHECK: Avoid CamelCase: <tRFCab>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:151: CHECK: Avoid CamelCase: <tRTPx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:152: CHECK: Avoid CamelCase: <tCKE>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:153: CHECK: Avoid CamelCase: <tCKESR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:154: CHECK: Avoid CamelCase: <tZQCS>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:155: CHECK: Avoid CamelCase: <tZQCL>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:156: CHECK: Avoid CamelCase: <tZQINIT>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:157: CHECK: Avoid CamelCase: <tDQSCKMAXx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:158: CHECK: Avoid CamelCase: <tRASmax>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:159: CHECK: Avoid CamelCase: <tFAW>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:209: CHECK: Avoid CamelCase: <tRL>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:210: CHECK: Avoid CamelCase: <tRP_AB>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:213: CHECK: Avoid CamelCase: <tRAS_MIN>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:215: CHECK: Avoid CamelCase: <tWTR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:216: CHECK: Avoid CamelCase: <tXP>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:217: CHECK: Avoid CamelCase: <tRTP>
I didn't find an clean way to fix the "don't use #ifdef" warning as we
need to define the gpio_bank for the SPL build only.
For the CamelCase warnings, the incriminated attributes represent
timings, so IMHO, it is more readable with CamelCase.

Set myself as OMAP4 maintainer.

Signed-off-by: Bastien Curutchet <[email protected]>

2 files changed, 2 insertions, 2 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 37288a47eb7..8c2f71b9fe2 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -780,7 +780,7 @@ config SYS_I2C_BUS_MAX
 	int "Max I2C busses"
 	depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA
 	default 3 if OMAP34XX || AM33XX || AM43XX
-	default 4 if ARCH_SOCFPGA
+	default 4 if ARCH_SOCFPGA || OMAP44XX
 	default 5 if OMAP54XX
 	help
 	  Define the maximum number of available I2C buses.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 24bd16ad5f3..0996d9fc30d 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -415,7 +415,7 @@ config MMC_OMAP36XX_PINS
 
 config HSMMC2_8BIT
 	bool "Enable 8-bit interface for eMMC (interface #2)"
-	depends on MMC_OMAP_HS && (OMAP54XX || DRA7XX || AM33XX || \
+	depends on MMC_OMAP_HS && (OMAP44XX || OMAP54XX || DRA7XX || AM33XX || \
 		AM43XX || ARCH_KEYSTONE)
 
 config SH_MMCIF